Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-06-01T18:43:21.893Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrodeposited Cobalt-Tungsten as a High-Temperature Diffusion Barrier for Graphite-Fiber/Nickel Composites

Published online by Cambridge University Press:  21 February 2011

N. S. Wheeler  and
D. S. Lashmore
N. S. Wheeler
Affiliation:
University of Virginia, Dept.of Materials Science and Engineering, Charlottesville, VA 22906
D. S. Lashmore
Affiliation:
National Institute of Standards and Technology, 224/B166, Gaithersburg, MD 20899
Get access

Abstract

There is a growing demand for advanced composites which can maintain their structural strength in high-temperature environments, particularly for aerospace applications. The use of graphite fiber/nickel metal matrix composites would be desirable if the deterioration of mechanical properties resulting from interdiffusion of carbon and nickel at temperatures in excess of 600°C could be avoided. The present research concerns an electrodeposited cobalt alloy coating containing 5-10.5 at-% tungsten, which was designed to serve as a diffusion barrier between graphite fibers and a nickel matrix. The resulting graphite/Co-W/Ni composite was tested under various time/temperature conditions, and the coating was shown to inhibit diffusion for up to 24 hr at 800°C. Annealed and unannealed coated fibers were analyzed by x-ray diffraction and by transmission electron microscopy The as-deposited coating was found to contain both h.c.p. and f.c.c. cobalt, whereas only f.c.c. was observed after annealing at 1100°C for 1.5 hours. WC was found at the coating/fiber interface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 318: Symposium Ca – Interface Control of Electrical, Chemical, and Mechanical Properties , 1993 , 603
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Wheeler, N.S., J. Compos. Tech. and Res. 3, 177 (1990).Google Scholar
2 Wheeler, N.S., Lashmore, D.S., Shapiro, A.J., and Handwerker, C.A., submitted to Met. Trans.Google Scholar
3 Aggour, L., Fitzer, E., Ignotowitz, E., and Sahebkar, M., Carbon 12, 358 (1974).CrossRefGoogle Scholar
4 Sara, R.V., U.S. Patent No. 3, 796, 587 (12 March 1974).Google Scholar
5 Rashid, M.S., U.S. Patent No. 3,823,029 (9 July 1974).Google Scholar
6 Sara, R.V., U.S. Patent No. 3,807,996, (30 April 1974).Google Scholar
7 Yagubets, A.N. and Sherstkina, V.N., Elektron. Obrab. Mater. 5, 31–33 (1974).Google Scholar
8 Lashmore, D.S. and Dariel, M.P., U.S. Patent No. 5 158 653 (27 October 1992).Google Scholar
9 Lashmore, D.S. and Dariel, M.P., U.S. Patent No. 5 268 235 (7 December 1993).Google Scholar
10 McElwee, R.F. and Holt, M.L., J. Electrochem. Soc. 99, 48 (1952).CrossRefGoogle Scholar
11 Metal Finishing Guidebook and Directory. 60th Ed., edited by M Murphy, D. Berger, and P.A. Frost (Metal Finishing, Hackensack, NJ, 1992), p. 242.Google Scholar
12 JCPDS Powder Diffraction File, edited by L.G. Berry (Joint Committee on Powder Diffraction Standards, Swarthmore, PA, 1974).Google Scholar
13 Roebuck, B., Almond, E.A., Cottenden, A.M.,Google Scholar
14 Nakahara, S. and Mahajan, S., J. Electrochem. Soc., 127, 283 (1980).CrossRefGoogle Scholar
15 Admon, U., Dariel, M.P., and Grunbaum, E., J. Appl. Phys. 59, 2002 (1986).CrossRefGoogle Scholar
16 Wheeler, N.S. and Lashmore, D.S., U.S. Patent No. 5 171 419 (15 December 1992).Google Scholar