Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-06-20T03:02:31.119Z Has data issue: false hasContentIssue false
  • English
  • Français

Elemental Analysis of Matrix Grain Boundaries in Sic Whisker Reinforced Si3N4 Based Composites

Published online by Cambridge University Press:  25 February 2011

J. Liu ,
K. Das Chowdhury ,
R. W. Carpenter  and
W. Braue
J. Liu
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ
K. Das Chowdhury
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ
R. W. Carpenter
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ
W. Braue
Affiliation:
German Aerospace Research Establishment, D5000, Cologne, Germany
Get access

Abstract

The structures of SiC/Si3N4 interfaces and Si3N4 matrix grain boundaries in Ceramic Matrix Composites (CMC) were investigated by high resolution electron microscopy. The light element chemistry of the interfaces was analyzed by high spatial resolution (∼3 nm) position resolved EELS in a field emission TEM and by high spatial resolution EDS in a dedicated scanning transmission electron microscope (STEM). High-angle annular dark-field (HAADF) imaging (resolution < 1 nm) technique was used to determine the distribution of yttrium atoms at matrix grain boundaries and at SiC/Si3N4 interfaces. HAADF images suggest that yttrium might diffuse into Si3N4 crystals bounding the interfacial and grain boundary regions.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 287: Symposium K – Silicon Nitride Ceramics–Scientific and Technological Advances , 1992 , 329
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Marshal, D. B., Cox, B. B., Moms, W. L. and Shaw, M. C., in: Advanced Composite Materials, Ed., Sacks, M., (Published by American Ceramic Society, 1991) 459.Google Scholar
[2] Chowdhury, K. Das, Carpenter, R. W. and Braue, W., Ultramicroscopy 40, 229 (1992).Google Scholar
[3] Weiss, J. K., Rez, P., and Higgs, A. A., Ultramicroscopy 41, 291(1992).Google Scholar
[4] Catalano, M., Kim, M. J., Carpenter, R. W., Chowdhury, K. Das and Braue, W., submitted to J. Mater. Res.Google Scholar
[5] Pennycook, S. J., Berger, S. D. and Culbertson, R. G., J. Microscopy 144, 229 (1986); S. J. Pennycook, Ultramicroscopy 30, 58 (1989).Google Scholar
[6] Liu, J. and Cowley, J. M., Ultramicroscopy 34, 119 (1990); 40, 352 (1992).Google Scholar
[7] Jack, K. H., in: Progmess in Nitrogen Ceramics, Ed., Riley, F. L., (Martinus Nijhoff Publishers, 1983) 45.Google Scholar