Hostname: page-component-76fb5796d-22dnz Total loading time: 0 Render date: 2024-04-26T16:29:14.506Z Has data issue: false hasContentIssue false

Enhanced 1.5 μm luminescence lifetime of vacuum deposited erbium-doped organic thin films for optical amplification applications

Published online by Cambridge University Press:  11 July 2012

Christophe Galindo
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Laurent Divay
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Françoise Soyer
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Evelyne Chastaing
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Renato Bisaro
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Pierre Le Barny
Affiliation:
THALES R&T, 1 avenue Augustin Fresnel, 91767 Palaiseau Cedex, France
Get access

Abstract

Inorganic erbium-doped glasses are widely used in telecommunications due to the sharp intra-atomic 4I13/24I15/2 transition in the 4f orbital of erbium resulting in an emission at ∼ 1.5 μm, which is the low loss window of silica optical fibres. The limited erbium concentration of about 1020 ions/cm3 in inorganic erbium-doped glasses and the low absorption coefficient of the Er3+ ions, imply that relatively long lengths of fibre are required. Organic erbium complexes present higher absorption cross sections due to the photosensitization of erbium by the organic conjugated ligands and broader emission bands than those of the free Er3+ ions. Such properties open the possibility to develop compact, low power and broadband infrared emitting devices. We present the study of an organic fluorinated erbium complex exhibiting 1.5 μm luminescence lifetime of several hundreds of microseconds measured on thin film. The organic complex has been deposited by vacuum sublimation technique. This deposition method allows the realization of an erbium-doped thin film without the help of an organic polymer matrix, which is a potential source of vibrationnal luminescence quenching. We report the synthesis, the sublimation process, and the characterization of the thin films. The chemical structure of the complex is assessed by FTIR, NMR and MALDI-TOF. Chemical integrity of the thin film after vacuum deposition is determined by FTIR. The morphology of the thin film is characterized by X-ray diffraction experiments. The optical properties of the thin film are determined by spectroscopic ellipsometry, UV-Vis-NIR absorption spectroscopy and time resolved NIR photoluminescence spectroscopy.

Type
Articles
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kik, P.G. and Polman, A., MRS Bulletin 23, 48, (1998).10.1557/S0883769400030268Google Scholar
2. Divay, L., Galindo, C., Chastaing, E., Bisaro, R., Wyczisk, F., Le Barny, P., MRS Proceedings, 1342, mrss11-1342-v03-19, DOI:10.1557/opl.2011.1155 (2011)Google Scholar
3. Monguzzi, A., Tubino, R., Meinardi, F., Orbelli Birolli, A., Pizzoti, M., Demartin, F., Quochi, F., Cordella, F. and Loi, M.A., Chem. Mater. 21, 128(2009)10.1021/cm8024445Google Scholar
4. Mancino, G., Ferguson, A. J., Beeby, A., Long, N. J., Jones, T. S., J. Am. Chem. Soc. 127, 524 (2005).10.1021/ja0441864Google Scholar
5. Glover, P. B., Bassett, A. P., Nockemann, P., Kariuki, B. M., Van Deun, R., Pikramenou, Z., Eur. Chem. J. 13, 63086320 (2007).10.1002/chem.200700087Google Scholar
6.See for example Le Quang, A. Q., Truong, V. G., Jurdyc, A.-M., Jacquier, B., Zyss, J. and Ledoux, I. J. App. Phys. 101, 023110 (2007)10.1063/1.2409607Google Scholar
7. Konkanen, S. et al. ., Proc. of SPIE 2996, 32 (1997)10.1117/12.271162Google Scholar
8. Magennis, S. W., Ferguson, A. J., Bryden, T., Jones, T. S., Beeby, A., Samuel, I. D. W., Synth. Met. 138, 463469 (2003).10.1016/S0379-6779(02)00501-5Google Scholar