Hostname: page-component-76fb5796d-5g6vh Total loading time: 0 Render date: 2024-04-30T00:32:01.292Z Has data issue: false hasContentIssue false
  • English
  • Français

Excimer Laser Recrystallization of a-Si Employing Aluminum Masking Window

Published online by Cambridge University Press:  17 March 2011

Jae-Hong Jeon ,
Min-Cheol Lee ,
Sang-Hoon Jung  and
Min-Koo Han
Jae-Hong Jeon
Affiliation:
School of Electrical Engineering, Seoul National University Shinlim-dong, Kwanak-ku, Seoul, 151-742, KOREA
Min-Cheol Lee
Affiliation:
School of Electrical Engineering, Seoul National University Shinlim-dong, Kwanak-ku, Seoul, 151-742, KOREA
Sang-Hoon Jung
Affiliation:
School of Electrical Engineering, Seoul National University Shinlim-dong, Kwanak-ku, Seoul, 151-742, KOREA
Min-Koo Han
Affiliation:
School of Electrical Engineering, Seoul National University Shinlim-dong, Kwanak-ku, Seoul, 151-742, KOREA
Get access

Abstract

A new excimer laser recrystallization method of amorphous silicon is proposed to increase the grain size and control the grain boundary locations in polycrystalline silicon films. The proposed method is based on the lateral grain growth which occurs at the interface between molten and unmolten regions. To obtain selectively molten regions, the proposed method employs aluminum patterns on amorphous silicon. The aluminum patterns act as the beam shield during the laser irradiation as well as the lateral heat sink during the solidification period. The high reflectance of aluminum at the wavelength of XeCl excimer laser offers stable beam shielding property, and the high thermal conductivity enhances the lateral heat flow by the quick draining of laterally propagated heat. TEM observation has revealed that the well arranged large grains were successfully obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 609: Symposium A – Amorphous & Heterogeneous Silicon Thin Films – 2000 , 2000 , A25.3
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Proano, R. E., Misage, R. S., and Ast, D. G., IEEE Trans. Electron Devices, 36, 1915 (1989).Google Scholar
2. Sameshima, T., Hara, M., and Usui, S., Jpn. J. Appl. Phys., 28, L2132 (1989).Google Scholar
3. Sera, K., Okumura, F., Uchida, H., Itoh, S., Kaneko, S., and Hotta, K., IEEE Trans. Electron Devices, 36, 2868 (1989).Google Scholar
4. Shimizu, K., Sugiura, O., and Matsumura, M., IEEE Trans. Elect ron Devices, 40, 112 (1993).Google Scholar
5. Im, J. S., and Kim, H. J., Appl. Phys. Lett., 63, 1969 (1993).Google Scholar
6. Sposili, R. S., and Kim, H. J., Appl. Phys. Lett., 69, 2865 (1996).Google Scholar
7. Oh, C. H., Ozawa, M., and Matsumura, M., Jpn. J. Appl. Phys., 37, L492 (1998).Google Scholar
8. Narayan, J., and White, C. W., Appl. Phys. Lett., 44, 35 (1984).Google Scholar