Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-29T16:34:04.687Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication and Characterization of Nife Thin Film Composition Modulated Alloys

Published online by Cambridge University Press:  10 February 2011

S. D. Leith  and
D. T. Schwartz
S. D. Leith
Affiliation:
University of Washington, Department of Chemical Engineering, Box 351750, Seattle, WA 98195–1750
D. T. Schwartz
Affiliation:
University of Washington, Department of Chemical Engineering, Box 351750, Seattle, WA 98195–1750
Get access

Abstract

Described are results showing that an oscillating flow-field can induce spatially periodic composition variations in electrodeposited NiFe films. Flow-induced NiFe composition modulated alloys (CMA's) were deposited on the disk of a rotating disk electrode by oscillating the disk rotation rate during galvanostatic plating. Deposit composition and structure were investigated using potentiostatic stripping voltammetry and scanning probe microscopy. Results illustrate a linear relationship between the composition modulation wavelength and the flow oscillation period. CMA's with wavelengths less than 10 nm can be fabricated when plating with a disk rotation rate oscillation period less than 3 seconds.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 451: Symposium P – Electrochemical Synthesis and Modification , 1996 , 341
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Judy, J.H., MRS Bull., 15, 63 (1990).Google Scholar
2. Andricacos, P.C. and Romankiw, L.T., in Advances in Electrochemical Science and Engineering, edited by Genscher, H. and Tobias, C.W., (VCH Publishers, New York, 1994), Vol. 3, pp. 227.Google Scholar
3. Jagielinski, T., MRS Bull., 15, 36 (1990).Google Scholar
4. Schwartz, D.T., J. Electrochem. Soc, 136, 53C (1989).Google Scholar
5. Schwartz, D.T., Stroeve, P., and Higgins, B.G., AIChE J., 35, 1315 (1989).Google Scholar
6. Leith, S.D. and Schwartz, D.T., J. Electrochem. Soc, 143, 873 (1996).Google Scholar
7. Newman, J., J. Electrochem. Soc, 113, 1235 (1966).Google Scholar