Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-06-16T12:45:03.577Z Has data issue: false hasContentIssue false
  • English
  • Français

Factors Affecting Passivation and Resistivity of Cu(Mg) Alloy Film

Published online by Cambridge University Press:  10 February 2011

Heung Lyul Cho  and
Jae Gab Lee
Heung Lyul Cho
Affiliation:
School of Metallurgical & Materials Eng, Kookmin University, 861–1, Joengneung-dong, Sungbuk-gu, Seoul 136–702, Korea
Jae Gab Lee
Affiliation:
School of Metallurgical & Materials Eng, Kookmin University, 861–1, Joengneung-dong, Sungbuk-gu, Seoul 136–702, Korea
Get access

Abstract

We have investigated the variables affecting passivation and resistivities of Cu alloy, which was sputter prepared from a Cu(6 at.%Mg) target. The results show that oxidation of Cu(Mg) alloy includes the surface segregation of Mg and its preferential oxidation. Sufficient surface segregation of Mg is necessary to form the high quality, protective MgO layer on the surface. The interfacial oxide layer produced from the reaction of Mg and SiO2 does not serve as a barrier against Mg diffusion, thereby the generation of free Si seems to continue until Mg is exhausted in copper. Therefore, lowering the contents of Mg in copper is required to reduce the resistivity of Cu(Mg) alloy. In-situ heating of substrate is very effective to reduce the Mg contents in copper alloy and to enhance the surface segregation of Mg, thereby facilitating the passivation of Cu(Mg) alloy with the low resistivity, especially during the low temperature oxidation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 564: Symposium N – Advanced Interconnects and Contacts , 1999 , 353
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lanford, W.A., Ding, P. J., Wang, W., Hymes, S., and Muraka, S. P., Thin Solid Films, 262(1995), 234–241.10.1016/0040-6090(95)05837-0Google Scholar
2. Ding, P. J., Lanford, W. A., Hymes, S., and Muraka, S. P., J. Appl. Phys., 75(1994) 3627.10.1063/1.356075Google Scholar
3. Ding, P. J., Lanford, W. A., Hymes, S., and Muraka, S. P., Appl. Phys. Lett., 64(21), 23 May, 1994, 2897–2899.10.1063/1.111408Google Scholar
4. Cabral, C., Jr., Harper, J. M. E., Holloway, K., Smith, D. A., and Schad, R. G., J. Vac. Sci. Technol. A. 10(4), Jul/Aug 1992, 1706–1712.Google Scholar
5. Li, J., Mayer, J. W., and Colgan, E. G., J. Appl. Phys. 70(5), September 1991, 2820–2827.Google Scholar
6. Massalski, T. B., Binary Alloy Phase Diagram (American Society for Metals, Metals Park, Ohio 44073).Google Scholar
7. Markov, I. V., Crystal Growth for Beginners, World Scientific Publishing Co. Pte. Ltd., NJ, 1995, p. 103.Google Scholar