Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-17T08:34:01.252Z Has data issue: false hasContentIssue false
  • English
  • Français

Film Stress Characterization Using Substrate Shape Data and Numerical Techniques

Published online by Cambridge University Press:  11 February 2011

Zhaohua Feng ,
Edward G. Lovell ,
Roxann L. Engelstad ,
Andrew R. Mikkelson ,
Phillip L. Reu  and
Jaewoong Sohn
Zhaohua Feng
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Edward G. Lovell
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Roxann L. Engelstad
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Andrew R. Mikkelson
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Phillip L. Reu
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Jaewoong Sohn
Affiliation:
Computational Mechanics Center, Mechanical Engineering Department, University of Wisconsin, Madison, WI 53706, U.S.A.
Get access

Abstract

Intrinsic stress in a film-substrate system can have deleterious effects. To facilitate an understanding of stress generation and control film quality, measuring film stress is essential. In recent years research laboratories and industry have increasingly adopted indirect methods, which are usually based on the measurement of substrate deformation. The film stress is calculated by equations relating the stress to the deformation, such as the well-known Stoney's equation. However, when the two principal stresses at each point in the film plane are not equal and their distribution is nonuniform, the local application of Stoney's equation does not provide correct stress results. A numerical technique is presented, which overcomes these limitations and makes accurate stress determination possible.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y3.4
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stoney, G. G., Proc. R. Soc., Ser. A 82, 172 (1909).Google Scholar
2. Kang, S. Y., Lim, H. J., Hwang, C. S. and Kim, H. J., J. Electrochem. Soc. 149 (6), 317 (2002).Google Scholar
3. Kim, H. S., Zouzounis, E. C. and Xie, Y. H., Appl. Phys. Lett. 80 (13), 2287 (2002).Google Scholar
4. Mann, A. B., Tapson, J., Heerden, D. V., Lewis, A. C., Josell, D. and Weihs, T. P., Rev. Sci. Inst. 73 (4), 1821 (2002).Google Scholar
5. Iosad, N. N., Jackson, B. D., Polyakov, S. N., Dmitriev, P. N. and Klapwijk, T. M., J. Vac. Sci. Technol. A 19 (4), 1840 (2001).Google Scholar
6. Freund, L. B., J. Mech. Phys. Solids 48 (6), 1159 (2000).Google Scholar
7. Finot, M. and Suresh, S., J. Mech. Phys. Solids 44 (5), 683 (1996).Google Scholar
8. Freund, L. B., J. Mech. Phys. Solids, 44 (5), 723 (1996).Google Scholar
9. Lee, H., Rosakis, A. J. and Freund, L. B., J. Appl. Phys. 89 (11), 6116 (2001).Google Scholar
10. Giannakopoulos, A. E., Blech, I. A. and Suresh, S., Acta. Mater. 49 (18), 3671 (2001).Google Scholar
11. Schlax, M. P., Engelstad, R. L., Lovell, E. G., Brooks, C. and Magg, C., Proc. SPIE, Emerg. Litho. Tech. IV 3997, 539 (2000).Google Scholar