Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-29T03:52:38.703Z Has data issue: false hasContentIssue false
  • English
  • Français

Improved Electrical Properties of SrTiO3, Thin Films by Electron Cyclotron Resonance Plasma Chemical Vapor Deposition

Published online by Cambridge University Press:  15 February 2011

Hisato Yabuta ,
Koichi Takemura ,
Hiromu Yamaguchi ,
Shuji Sone ,
Toshiyuki Sakuma  and
Masaji Yoshida
Hisato Yabuta
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Koichi Takemura
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Hiromu Yamaguchi
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Shuji Sone
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Toshiyuki Sakuma
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Masaji Yoshida
Affiliation:
Fundamental Research Laboratories, NEC Corporation, 4–1–1 Miyazaki, Miyamae-ku, Kawasaki, Kanagawa 216, Japan
Get access

Abstract

SrTiO3 thin films with various compositions have been prepared on Pt coated sapphire substrates by electron cyclotron resonance plasma chemical vapor deposition at 450 °C and 600 °C. The stoichiometric (Sr/(Sr+Ti)=0.50) films have maximum dielectric constants (εr) of 190 for the 600 °C deposition and 170 for the 450 °C deposition. The dielectric constant decreases abruptly with increasing or decreasing the Sr/(Sr+Ti) value from the stoichiometry, especially for the 450 °C deposition. The Ti-rich films include titanium suboxide (TiOx). In the Sr-rich films, excess SrO is thought to be inserted into the SrO plane and TiO2 plane in SrTiO3. In addition, SrCO3 is included in Sr-rich films. The concentration of these impurities is greater for the 450 °C deposition than for the 600 °C deposition. The leakage current density increases with increasing the Sr/(Sr+Ti) value, and the leakage current density for the 450 °C deposition is larger than for the 600 °C deposition in the Sr-rich composition region. These impurity phases may be related to the higher leakage current density. These results suggest that precise composition control in stoichiometry is necessary to deposit SrTiO3 films with superior electrical properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 361: Symposium I2 – Ferroelectric Thin Films IV , 1994 , 325
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. See, for example, Koyama, K., Sakuma, T., Yamamichi, S., Watanabe, H., Aoki, H., Ohya, S., Miyasaka, Y. and Kikkawa, T., “1991 IEDM Technical Digest” (IEEE, Piscataway, New Jersey, 1991), p. 823.Google Scholar
2. Yamaguchi, H., Lesaicherre, P.-Y., Sakuma, T., Miyasaka, Y. and Yoshida, M., Jpn. J. Appl. Phys. 32 (1993) 4069.Google Scholar
3. Lesaicherre, P.-Y., Yamaguchi, H., Sakuma, T., Miyasaka, Y., Yoshida, M. and Ishitani, A., Mat. Res. Soc. Symp. Proc. 310 (1993) 487.Google Scholar
4. Yoshida, M., Yamaguchi, H., Sakuma, T., Miyasaka, Y., Lesaicherre, P.-Y. and Ishitani, A., J. Electrochem. Soc. 142 (1995) 244.Google Scholar
5. Powder Diffraction File, No. 35–0734, 22–1444, 11–0663, (International Centre for Diffraction Data, Swarthmore, 1992).Google Scholar
6. Myoren, H., Matsumoto, T. and Osaka, Y., Jpn. J. Appl. Phys. 31 (1992) L1425.Google Scholar
7. Matsui, K., Taga, M. and Kobayashi, T., Jpn. J. Appl. Phys. 32 (1993) L796.Google Scholar