Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-05-15T07:37:03.207Z Has data issue: false hasContentIssue false
  • English
  • Français

The Influence of Magnetic Fields on the Properties of Amorphous Carbon Prepared by Plasma Deposition

Published online by Cambridge University Press:  25 February 2011

R. H. Jarman  and
A. T. Howe
R. H. Jarman
Affiliation:
Amoco Corporation, Corporate Research, P.O. Box 400, Naperville, IL 60566
A. T. Howe
Affiliation:
Amoco Corporation, Corporate Research, P.O. Box 400, Naperville, IL 60566
Get access

Abstract

Amorphous carbon films exhibit a wide range of optical, electrical and mechanical properties which make them candidates for a number of applications such as protective coatings and insulators in electronic devices. We describe the effects of a magnetic field applied at the powered electrode in a capacitively coupled rf discharge on the optical and electrical properties of amorphous carbon films deposited on substrates mounted on both electrodes. In the case of substrates placed on the powered electrode, the film properties appear to be very sensitive to the magnetic field strength. At the highest magnetic field, the deposition rates are very much higher than those obtained in the absence of a magnetic field. The optical gap varies from 1.1 eV to 2.7 eV depending on the deposition conditions. The electrical conductivities of the films are very low and show a complex dependence on the applied electric field.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 98: Symposium K – Plasma Processing and Synthesis of Materials II , 1987 , 273
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Anderson, D. A., Philos. Mag., 35, 17 (1977)Google Scholar
2. Meyerson, B. and Smith, F. W., J. Non-Cryst. Solids, 35&36, 435 (1980)Google Scholar
3. Jones, D. I. and Stewart, A. D., Philos. Mag., 46, 423 (1982)Google Scholar
4. Bubenzer, A., Dischler, B., Brandt, G. and Koidl, P., J. App; Phys., 54, 4590 (1983)Google Scholar
5. Thornton, J. A. and Penfold, A. S., Thin Film Processes (Vossen, J. L. and Kern, W. eds), Academic Press, 72 (1978) and other chapters.Google Scholar
6. McKenzie, D. R., McPhedran, R. C., Savvides, N. and Botten, L. C., Philos. Mag. B, 48, 341 (1983)Google Scholar
7. Swanepoel, R., J. Phys. E: Sci. Instrum., 10, 1214 (1983)Google Scholar
8. Wagner, J., Wild, Ch., Pohl, F. and Koidl, P, Appl. Phys. Lett., 48, 106 (1986)Google Scholar
9. Roth, R. M. and Jarman, R. H., Materials Research Society, Spring Symposium, Anaheim, CA (1987)Google Scholar
10. Kobayashi, K., Mutusukura, N. and Machi, Y., J. Appl. Phys., 59, 910 (1986)Google Scholar