Hostname: page-component-848d4c4894-x5gtn Total loading time: 0 Render date: 2024-05-20T14:46:19.462Z Has data issue: false hasContentIssue false
  • English
  • Français

Ion Beam Mixing of Au-Ti

Published online by Cambridge University Press:  25 February 2011

E. L. Fleischer ,
J. W. Mayer  and
J-P. Hirvonen
E. L. Fleischer
Affiliation:
Materials Science and Engineering, Cornell University, Ithaca, NY 14853
J. W. Mayer
Affiliation:
Materials Science and Engineering, Cornell University, Ithaca, NY 14853
J-P. Hirvonen
Affiliation:
Department of Physics, University of Helsinki, Helsinki, Finland
Get access

Abstract

Multi-layered films of Ti-Au of linearly varying composition were produced by ion irradiation using 600 KeV Ar++ ions. Rutherford Backscattering Spectrometry showed that mixing was complete. The microstructure observed by transmission electron microscopy consisted of a combination of crystalline and amorphous phases at the Ti-rich end and of a crystalline fcc Au solid solution at the Au-rich end. Corrosion testing in a simple immersion cell revealed remarkable corrosion resistance of the ion beam mixed sample compared to that of pure titanium or as-deposited Ti-Au samples (from 100%Au to 60%Ti-40%Au). Wear and friction testing was performed using a reciprocal sliding apparatus with a polytetrafluoroethylene (PTFE) pin. A composition of 60%Ti-40%Au was chosen as optimal for improved corrosion resistance without appreciable degradation in wear and friction properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 93: Symposium C – Materials Modification and Growth Using Ion Beams , 1987 , 227
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dobbs, H.S., Scales, J.T., Titanium Alloys in Surgical Implants, (ASTM, Philadelphia, 1983) pp 173–186.Google Scholar
2. McKellop, H., Clarke, I., Markolf, K., Amstatz, H., J. of Biomed. Res. 15, 619 (1981).Google Scholar
3. Brauer, E., Nann, E., Korros. 20, 676 (1969).Google Scholar
4. Hirvonen, J.K., J. Vac. Sci. Tech. A3(6), 2691 (1985).Google Scholar
5. Liu, B., Johnson, W.L., Nicolet, M-A., Lau, S.S., Nuclear Instruments and Methods 209/210, 229 (1983).Google Scholar
6. Hirvonen, J-P., Nastasi, M., Phillips, J.R., Mayer, J.W., Mat. Res. Soc. Sym. Pro. 55, 395 (1986).Google Scholar
7. Munn, P., Wolf, G.K., Nucl. Instru. Meth. B7/8, 205 (1985).Google Scholar
8. Miyoshi, K.M., Spalvins, T., Buckley, D.H., Wear 108, 169 (1986).Google Scholar