Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-06-04T17:47:23.018Z Has data issue: false hasContentIssue false
  • English
  • Français

LPCVD of Silicon Nitride Films From Hexachlorodisilane and Ammonia

Published online by Cambridge University Press:  22 February 2011

R. C. Taylor  and
B. A. Scot
R. C. Taylor
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, NY 10598
B. A. Scot
Affiliation:
IBM T.J. Watson Research Center, Yorktown Heights, NY 10598
Get access

Abstract

Hexachlorodisilane (Si2Cl6) has been used as an alternative to dichlorosilane and silane for growth of silicon nitride films. The films were grown at a pressure of 0.7 Torr at temperatures between 450° and 850°C. Growth rate data indicates a kinetically controlled deposition with an activation energy of 29.3 kcal/mole. Growth rates are substantially higher than those obtained from SiH2Cl2 under similar conditions, and the physical properties of the films are essentially the same. At the higher growth temperatures stoichiometric Si3N4 films with no detectable chlorine can be obtained when a NH3/Si2Cl6 ratio of 60 or greater is used.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 105: Symposium F – SiO2 and Its Interfaces , 1987 , 319
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Taylor, R. C., Scott, B. A., Lin, S. T., LeGoues, F. and Tsang, J. C., MRS Symposia Proc. 77, 709 (1987).CrossRefGoogle Scholar
2. Motojima, S., Iwamori, N. and Hattou, T., J. Mater. Sci. 21, 3836 (1986).CrossRefGoogle Scholar
3. Pan, P. and Berry, W., J. Electrochem. Soc. 132, 3001 (1985).CrossRefGoogle Scholar
4. Morosanu, C. E., losif, D. and Segal, E., Thin Solid Films 92, 333 (1982).CrossRefGoogle Scholar
5. Morosanu, C. E. and Segal, E., Thin Solid Films 91, 251 (1982).CrossRefGoogle Scholar
6. Yi, K-S., Park, H-L. and Chun, J. S., J. Vac. Sci. Technol. A 4, 3082 (1986).CrossRefGoogle Scholar
7. Makino, T., J. Electrochem. Soc. 130, 450 (1983).CrossRefGoogle Scholar
8. Rosier, R. R., Solid State Technol. 20, 63 (1977).Google Scholar
9. Dong, D., Irene, E. A. and Young, D. R., I. Electrochem. Soc. 125, 819 (1978).CrossRefGoogle Scholar
10. Topich, J. A., Electrochem. Soc. Proc. 83–8, 32 (1983).Google Scholar
11. Habraken, F. H. P. M., Kuiper, A. E. T., Oostrom, A. v., Tamminga, Y. and Theeten, J. P., J. Appl. Phys. 53, 404 (1982).CrossRefGoogle Scholar
12. Ommen, A. H. and Habraken, F. H. P. M., “Insulating Films on Semiconductors,” North-Holland, Amsterdam, p. 237 (1986).Google Scholar
13. Peercy, P. S. and Stein, H. J., Electrochem. Soc. Proc. 83–8, 3 (1983).Google Scholar
14. Morosanu, C. E., Thin Solid Films 65, 171 (1980).CrossRefGoogle Scholar
15. Hezel, R., Blumenstock, K. and Schorner, R., Electrochem. Soc. Proc. 83–8, 280 (1983).Google Scholar