Hostname: page-component-76fb5796d-22dnz Total loading time: 0 Render date: 2024-04-29T09:45:13.823Z Has data issue: false hasContentIssue false

Metal-Oxide Interfacial Structures Produced By Internal Oxidation

Published online by Cambridge University Press:  25 February 2011

P. Lu
Affiliation:
Dept. of Mechanics and Materials Science, Rutgers University, Piscataway, NJ 08855.
I.-C. Tung
Affiliation:
Dept. of Mechanics and Materials Science, Rutgers University, Piscataway, NJ 08855.
F. Cosandey
Affiliation:
Dept. of Mechanics and Materials Science, Rutgers University, Piscataway, NJ 08855.
Get access

Abstract

Interfaces in Cu/MgO, Pd/MgO, Pd/Al2O3, Ni/NiAl2O4 and Ni/Al2O3 systems produced by internal oxidation have been studied by transmission electron microscopy. For the Cu/MgO system, the MgO particles, with a cube-on-cube orientation with respect to Cu matrix, are faceted with principal faces parallel to {111} lattice planes of Cu and MgO. For the Pd/MgO system, the MgO particles, with a cube-on-cube orientation with Pd matrix, are faceted with interfaces parallel to the {100} and {111} lattice planes of MgO and Pd. Additional plate-like MgO particles with main facets parallel to {111} lattice planes possess a twin orientation relationship with the Pd matrix. Interfaces in Cu/MgO and Pd/MgO systems are all partially coherent with interfacial misfit dislocations. For the Pd/Al2O3 system, various transition oxide phases such as η, δ, and θ-Al2O3 and stable α-Al2O3 phase have been observed. The [1100] direction of α-Al2O3 is parallel to the [110] direction of Pd and the (0001) plane of α-Al2O3 is parallel or nearly parallel to the (110) plane of Pd. The NiAl2O4 spinel phase and Al2O3 phases are formed in Ni-Al alloys under two different oxidation conditions. The NiAl2O4 particles have a plate-like morphology with a cube-on-cube orientation relationship with the Ni matrix, while Al2O3 particles are randomly oriented.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Fechtand, H.J. Gleiter, H., Acta metall. 33, 557(1985)CrossRefGoogle Scholar
[2] Fischmeister, H.F., Mader, W., Gibbesch, B. and Elssner, G., Mat. Res. Soc. Symp. Proc. 122, 529 (1988).CrossRefGoogle Scholar
[3] Hoel, P.H., Habermeier, H.U. and Ruhle, M., J. Physique C4, 141 (1985).Google Scholar
[4]Metal-Ceramic Interfaces”, Ed. Ruhle, M., Evans, A.G., Ashby, M.F. and Hirth, J.P., (Acta-Scripta Metall. Proc. Ser. 4) (1990).Google Scholar
[5] Necker, G. and Mader, W., Phil. Mag. Letts. 58, 205 (1988).CrossRefGoogle Scholar
[6] Lu, P. and Cosandey, F., Ultramicroscopy, in press (1991).Google Scholar
[7] Lu, P. and Cosandey, F., submitted to Acta Metall. Mater. (1991).Google Scholar
[8] Trumble, K.P. and Ruhle, M., Acta Metall. Mater. 39, 1915 (1991).CrossRefGoogle Scholar
[9] Eastman, J.A. and Ruhle, M., Ceram. Eng. Sci. Proc. 10, 1515 (1989).Google Scholar
[10] Muschik, T. and Ruhle, M., Phil. Mag. in press, (1991).Google Scholar
[11] Shieu, F.S. and Sass, S.L., Acta Metall. Mater. 38, 1653 (1990).CrossRefGoogle Scholar
[12] Cosandey, F., Roth, L.D. and Tien, J.K., Acta Met. 31, 2029 (1983).Google Scholar
[13] Mulder, C.A.M. and Klomp, J.T., J. Physique C4, 111(1985).Google Scholar
[14] Ernst, P., Pirouz, P. and Heuer, A.H., Mat. Res. Soc. Symp. Proc. 138, 557 (1989).CrossRefGoogle Scholar