Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-05-10T20:37:43.560Z Has data issue: false hasContentIssue false
  • English
  • Français

Micro-Fabricated Thin-Film Fuel Cells for Portable Power Requirements

Published online by Cambridge University Press:  01 February 2011

Alan F. Jankowski ,
Jeffrey P. Hayes ,
R. Tim Graff  and
Jeffrey D. Morse
Alan F. Jankowski
Affiliation:
Chemistry & Materials Science Lawrence Livermore National Laboratory
Jeffrey P. Hayes
Affiliation:
Mechanical Engineering Lawrence Livermore National Laboratory
R. Tim Graff
Affiliation:
Electrical Engineering Livermore, CA 94551-9900, U.S.A. Lawrence Livermore National Laboratory
Jeffrey D. Morse
Affiliation:
Electrical Engineering Livermore, CA 94551-9900, U.S.A. Lawrence Livermore National Laboratory
Get access

Abstract

Fuel cells have gained renewed interest for applications in portable power since the energy is stored in a separate reservoir of fuel rather than as an integral part of the power source, as is the case with batteries. While miniaturized fuel cells have been demonstrated for the low power regime (1-20 Watts), numerous issues still must be resolved prior to deployment for applications as a replacement for batteries. As traditional fuel cell designs are scaled down in both power output and physical footprint, several issues impact the operation, efficiency, and overall performance of the fuel cell system. These issues include fuel storage, fuel delivery, system startup, peak power requirements, cell stacking, and thermal management. The combination of thin-film deposition and micro-machining materials offers potential advantages with respect to stack size and weight, flow field and manifold structures, fuel storage, and thermal management. The micro-fabrication technologies that enable material and fuel flexibility through a modular fuel cell platform will be described along with experimental results from both solid oxide and proton exchange membrane, thin-film fuel cells.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 730: Symposium V – Materials for Energy Storage, Generation, and Transport , 2002 , V4.2
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jankowski, A.F., in Ionic and Mixed Conducting Ceramics III, edited by Ramanarayanan, T., (Electrochem. Soc. Proc. 97-24, Pennington, PA, 1998) pp. 106–113.Google Scholar
2. Jankowski, A.F. and Morse, J.D., in Materials for Electrochemical Energy Storage and Conversion II, edited by Doughty, D., Ginley, D., Scrosati, B., Takamura, T. and Zhang, Z., (Mater. Res. Soc. Symp. Proc. 496, Pittsburgh, PA, 1998) pp. 155–158.Google Scholar
3. Jankowski, A., Graff, T., Hayes, J., and Morse, J., in Solid Oxide Fuel Cells VI, edited by Singhal, S. and Dokiya, M., (Electrochem. Soc. Proc. 99-19, Pennington, PA, 1999) pp. 932–937.Google Scholar
4. Morse, J., Jankowski, A.F., Graff, R.T., and Hayes, J., J. Vac. Sci. Technol. A 18, 2003 (2000).Google Scholar
5. Morse, J., Graff, R., Hayes, J., and Jankowski, A., in New Materials for Batteries and Fuel Cells, edited by Doughty, D., Brack, H., Naoi, K., Nazar, L., (Mater. Res. Soc. Symp. Proc. 575, Pittsburgh, PA, 2000) pp. 321–324.Google Scholar