Hostname: page-component-76fb5796d-45l2p Total loading time: 0 Render date: 2024-04-26T15:01:51.664Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and Thermal Conductivity of Thermal Barrier Coatings Processed by Plasma Spray and Physical Vapor Deposition Techniques

Published online by Cambridge University Press:  10 February 2011

K. S. Ravichandran ,
R. E. Dutton ,
S. L. Semiatin  and
K. An
K. S. Ravichandran
Affiliation:
Department of Metallurgical Engineering, The University of Utah, Salt Lake City, UT 84112.
R. E. Dutton
Affiliation:
Wright Laboratory, Materials Directorate, WL/MLLN, Wright Patterson AFB, OH 45433.
S. L. Semiatin
Affiliation:
Wright Laboratory, Materials Directorate, WL/MLLN, Wright Patterson AFB, OH 45433.
K. An
Affiliation:
Department of Metallurgical Engineering, The University of Utah, Salt Lake City, UT 84112.
Get access

Abstract

The temperature dependence of the thermal conductivity of multilayer coatings made by a plasma spray technique as well as some coatings made by physical vapor deposition (PVD) was investigated. The multilayer coatings consisted of a varying number of layers of Al2O3 and ZrO2 stabilized by 8%Y2O3. Plasma sprayed coatings exhibited a large reduction in thermal conductivity at all temperatures when compared to the bulk monolithic materials. This reduction was found to be due to porosity as well as thermal resistance brought about by interfaces in the coatings. A comparable reduction in thermal conductivity was achieved in monolithic ZrO2 as well as in a composite coating deposited by the PVD technique. Microstructural factors that may be responsible for this reduction are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 434: Symposium U – Layered Materials for Structural Applications , 1996 , 27
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Miller, R. A., Surf. Coat. and Tech., 10, 1 (1987).Google Scholar
2. Lammermann, H. and Kienel, G., Adv. Mater. Processes, 140, 18 (1991).Google Scholar
3. Pawlowski, L. and Fauchais, P., Int. Metall. Rev., 31, 271 (1992).Google Scholar
4. Taylor, R. E., J. Phy. E. Sci. Inst., 13, 1193 (1980).Google Scholar
5. Hasselman, D. P. H., Johnson, L. F., Bentsen, L. D., Syed, R., Lee, H. M. and Swain, M. V., Am. Ceram. Soc. Bull., 66, 799 (1987).Google Scholar
6. Santos, W. N. D. and Taylor, R., High Temp. - High Press., 25, 89 (1993).Google Scholar
7. Roode, M. V. and Beardsley, B., ASME Paper 88-GT-278, Presented at the Gas Turbine and Aeroengine Congress, Amsterdam, The Netherlands, June 6–9, (1988).Google Scholar
8. Liebert, C. H. and Gaugler, R. E., Thin Solid Films, 73, 471 (1980).Google Scholar
9. Thornton, J. A., Ann. Rev. Mater. Sci., 7, 239 (1977).Google Scholar
10. Paton, B. E. and Movchan, B. A., Thin Solid Films, 54, 1 (1978).Google Scholar