Hostname: page-component-76fb5796d-25wd4 Total loading time: 0 Render date: 2024-04-28T08:37:18.665Z Has data issue: false hasContentIssue false
  • English
  • Français

Modelling of Mechanisms Involved in Ceramic Synthesis by Laser Conversion of an Organosilazane Aerosol

Published online by Cambridge University Press:  25 February 2011

Peter R. Strutt ,
Tongsan D. Xiao ,
Kenneth E. Gonsalves  and
Paul G. Klemens
Peter R. Strutt
Affiliation:
The University of Connecticut, Institute of Materials Science, U-136, Storrs, CT 06268
Tongsan D. Xiao
Affiliation:
The University of Connecticut, Institute of Materials Science, U-136, Storrs, CT 06268
Kenneth E. Gonsalves
Affiliation:
The University of Connecticut, Institute of Materials Science, U-136, Storrs, CT 06268
Paul G. Klemens
Affiliation:
The University of Connecticut, Institute of Materials Science, U-136, Storrs, CT 06268
Get access

Abstract

A study has been made of basic mechanisms involved in a new process for the rapid synthesis of preceramic nanoparticle powders. In this process an aerosol, formed from an ultrasonically atomized liquid organosilazane monomer, (CH3SiHNH)n with n = 3 or 4, is injected into the beam of an industrial cw CO2 laser. One critical feature examined is the rapid condensation of molecular species from the laser plume, in a process involving 3-dimensional cross-linking. In accompanying studies, a model has been formulated to determine the laser plume temperature, the cooling rate of condensing species, and the particle diameter. These are obtained by analytical solution of heat conduction, momentum and mass conservation equations that consider heat loss, by gas conduction, radiation, evaporation, and convection.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 204: Symposium E – Chemical Perspectives of Microelectronic Materials II , 1990 , 527
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Haggerty, J. S., Garvey, G. J., Flint, J. H., Sheldon, B. W., Aoki, M., Okuyama, M., Ritter, J. E., & Nair, S. V., Ceramic Transitions, Proceeding of the First International Conference on Ceramic Powder Processing Science, Ed. Messing, G. L. et al. , Amer. Ceram. Soc., Westerville OH, 1059–1068, 1988.Google Scholar
2. Haggerty, J. S., Garvey, G., Lihrmann, J. M., & Ritter, J. E., MRS Symposium on Defect Properties and Processing of High Technology Nonmetallic Materials, Ed. Chen, Y et al. , MRS, Pitt., PA, 51–62, 1986.Google Scholar
3. Symons, W., “The Effect of Oxygen on the Hot Isostatic Pressing behavior of Laser Synthesized Silicon Nitride,” Ph.D Thesis, Rutgers University October, 1989.Google Scholar
4. Symons, W., Danforth, S. C., Proc. of Third Conf. Ceramic Materials and Components for Engines, Ed. Tennery, V. J., Amer. Ceram. Soc. Westerville OH, 67–75, 1989.Google Scholar
5. Davis, S. C. & Brock, J. R., Appl. Opt., 26 No. 5, 786(1987).Google Scholar
6. Armstrong, R. L., Appl. Opt., 23, No. 1, 148(1984).Google Scholar
7. Alexander, D. R. & Armstrong, J. O., Appl. Opt. 26 No. 3, 533(1987).Google Scholar
8. Williams, F. A., J. Heat Mass Transfer, 8, 575(1965).Google Scholar
9. Chitanvis, S. M. & Gerstl, S. A. W., J. Appl. Phys., 62, 3091(1987).Google Scholar
10. Strutt, P. R. & Gonsalves, K. E., Chem. News, Sept. 10, 1990, p.23.Google Scholar
11. Gonsalves, K. E., Strutt, P. R., & Xiao, T. D., Adv. Mater. (accepted for Publ.).Google Scholar