Hostname: page-component-848d4c4894-5nwft Total loading time: 0 Render date: 2024-05-05T15:01:46.307Z Has data issue: false hasContentIssue false
  • English
  • Français

On the Erosion of Material Surfaces caused by Electrical Plasma Discharging

Published online by Cambridge University Press:  01 February 2011

Flavio A. Soldera  and
Frank Mücklich
Flavio A. Soldera
Affiliation:
Department for Materials Science - Functional Materials, Saarland University, P.O. Box 151150, D-66041 Saarbrücken, Germany.
Frank Mücklich
Affiliation:
Department for Materials Science - Functional Materials, Saarland University, P.O. Box 151150, D-66041 Saarbrücken, Germany.
Get access

Abstract

The erosion of material surfaces produced by electrical discharges plays an important role on the degradation of many electrical devices, such as electrical contacts, switches or spark plugs. A discharge produces an extreme and concentrated flow of energy into the material that heats it and can even cause melting or vaporization. The plasma pressure may cause an even greater removal of material by the emission of droplets of molten material, producing craters in the surface of the material. In this contribution the microscopic erosion mechanisms on RuAl basis intermetallic compounds are compared with those for pure metals. Single discharge experiments at high pressure were done and the erosion structures were characterized with white light interferometry and scanning electron microscopy. The effects of microstructure on the surface erosion are discussed on the basis of different samples of RuAl. In certain high temperature applications, formation of oxide scales is an important process that may influence the discharge characteristics and erosion mechanisms. These effects are discussed on results in pre-oxidized samples. It was shown, that the surface can be additionally stabilized by controlling the protecting oxide coatings.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 843: Symposium T – Surface Engineering-Fundamentals and Applications , 2004 , T5.4
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hantzsche, E., IEEE Trans. Plasma Sci. 31, 799–808 (2003).Google Scholar
[2] Daalder, J., J. Phys. D 11, 1667–1681 (1978).Google Scholar
[3] Lasagni, A., Soldera, F., and Mücklich, F., Z. Metallk. 95, 102–108 (2004).Google Scholar
[4] Gray, E. W. and Pharney, J. R.: J. Appl. Phys. 45, 667–671 (1974).Google Scholar
[5] Soldera, F., Ilić, N., Brännström, S., Barrientos, I., Gobran, H., and Mücklich, F., Oxid. Met. 59, 529–542 (2003).Google Scholar
[6] Soldera, F., Ilić, N., Manent Conesa, N., Barrientos, I., and Mücklich, F., Intermetallics 13, 101–107 (2005).Google Scholar
[7] Soldera, F., Mücklich, F., Kaiser, T., and Hrastnik, K., IEEE Trans. Vehicular Technol. 53, 1257–1265 (2004).Google Scholar
[8] Soldera, F., Sierra Rota, M., Ilić, N., and Mücklich, F., Prakt. Metallog. 37, 477–486 (2000).Google Scholar
[9] Gobran, H., Ilić, N., Mücklich, F., Intermetallics, 12, 555–562 (2004).Google Scholar