Hostname: page-component-848d4c4894-jbqgn Total loading time: 0 Render date: 2024-06-16T00:43:27.486Z Has data issue: false hasContentIssue false
  • English
  • Français

Production of Diamond-Like Carbon Films by Plasma Source Ion Implantation

Published online by Cambridge University Press:  25 February 2011

Ling Xie ,
Frank J. Worzala ,
John R. Conrad  and
Richard A. Dodd
Ling Xie
Affiliation:
Engineering Research Center for Plasma-Aided Manufacturing, 1500 Johnson Drive, University of Wisconsin-Madison, Madison, WI 53706
Frank J. Worzala
Affiliation:
Engineering Research Center for Plasma-Aided Manufacturing, 1500 Johnson Drive, University of Wisconsin-Madison, Madison, WI 53706
John R. Conrad
Affiliation:
Engineering Research Center for Plasma-Aided Manufacturing, 1500 Johnson Drive, University of Wisconsin-Madison, Madison, WI 53706
Richard A. Dodd
Affiliation:
Engineering Research Center for Plasma-Aided Manufacturing, 1500 Johnson Drive, University of Wisconsin-Madison, Madison, WI 53706
Get access

Abstract

In addition to being successfully used for ion implantation, the plasma source ion implantation (PSII) technique has been used to produce diamond-like carbon films. Homogeneous, adherent films were obtained on silicon and stainless steel substrates under 2 kV pulse bias voltages and 50 mtorr methane plasma pressure. Chemical composition analysis was made using Auger electron microscopy. Fretting wear tests and scratch tests were performed to study the tribological and adherent properties. Cross sectional TEM samples were prepared. The interfacial microstrucutres and chemical compositions were analyzed using transmission electron microscopy and scanning transmission electron microscopy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 270: Symposium M – Novel Forms of Carbon , 1992 , 499
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Angus, J.C., Koidl, P. and Domitz, S., chapter 4 in Plasma Deposited Thin Films, edited by Mort, J. and Jansen, F., Eds (CRC Press, Boca Raton, 1986).Google Scholar
2. Conrad, J.R., U.S.Patent 4, 764, 394(1988).Google Scholar
3. Conrad, J.R., Radtke, J.L.. Dodd, R.A., Worzala, F.J. and Tran, N.C., J. Appl. Phys. 62, 4591(1987).Google Scholar
4. Conrad, J.R., Proc. Int. Conf. on Surface Modification of Methods by Ion Beams, Riva del Garda, September 12-16. 1988, Mater. Sci. Eng., A116, 197(1989).Google Scholar
5. Conrad, J.R., Baumann, S.. Fleming, R. and Meeker, G.P., J. Appl. Phys. 65, 1707(1989).Google Scholar
6. Worzala, F.J., Dodd, R.A., Conrad, J.R. and Radtke, J.L., Heat Treating, Aug. 89(1989).Google Scholar
7. Post, R.S., Conrad, J.R., and Smith, D.K., Intl. JI, Res. and Dev. Oct. 106(1989).Google Scholar
8. Conrad, J.R., Dodd, R.A., Han, S., Madapura, M., Scheuer, J., Sridharan, K., and Worzala, F.J., J. Vac. Sci. Technol., A8, 3146(1990).Google Scholar
9. Sandstrom, P.W., Sridharan, K. and Conrad, J.R., “A Machine for Fretting Wear Testing of Plasma Surface Modified Materials”, to be published.Google Scholar
10. Benedict, J.P., Anderson, Ron, Klepeis, S.J., and Chaker, M., in A Procedure for Cross Sectioning Specific Semiconductor Devices for Both SEM and TEM Analysis, edited by Anderson, Ron, (Mater. Res. Soc. Proc. 199, Pittsburgh, PA 1990) pp. 189–204.Google Scholar
11. D.F. Dawson-Elli, Turowski, M.A., Kelly, T.F., Kim, Y.W., Zreiba, N.A., Teng, C.M., and Zhou, M., in Mechanical Polishing to Submicron Thickness for Extensive Thin Area in Heterogeneous Samples, edited by Anderson, Ron, (Mater. Res. Soc. Proc. 199, Pittsburgh, PA 1990) pp. 75–84.Google Scholar
12. Shroder, R.E., Nemanich, R.J. and Glass, J.T., Phys. Rev. B, 41, 3738 (1990).Google Scholar
13. Dillon, R.O. and Woollam, J.A., Physical Rev. B, 29, 6 3482 (1984).Google Scholar
14. Kawasaki, M., Vandentop, G.J., Salmeron, M., and Somorjai, G.A., Surf. Sci. 227, 261(1990).Google Scholar
15. Vandentop, G.J., Nascente, P.A.P., Kawasaki, M., Ogletree, D.F., Somorjai, G.A., and Salmeron, M., J. Vac. Sci. Technol. A 9, 2273(1991).Google Scholar