Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-16T01:51:21.472Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed X-Ray Annealing of Arsenic-Implanted Silicon

Published online by Cambridge University Press:  15 February 2011

T. W. Sigmon ,
D. E. Osias ,
R. L. Schneider ,
C. Gilman  and
G. Dahlbacka
T. W. Sigmon
Affiliation:
Stanford Electronics Laboratories, Stanford, CA 94305
D. E. Osias
Affiliation:
Physics International Company, San Leandro, CA 94577
R. L. Schneider
Affiliation:
Physics International Company, San Leandro, CA 94577
C. Gilman
Affiliation:
Physics International Company, San Leandro, CA 94577
G. Dahlbacka
Affiliation:
Physics International Company, San Leandro, CA 94577
Get access

Abstract

In this paper we report experiments on annealing of arsenic-implanted silicon using a pulsed imploding-plasma X-ray source. Silicon wafers of <100> orientation were implanted with arsenic ions at 50 keV to a dose of 3.5 ∼ 1015 cm−2 and exposed to a single 50 ns pulse of X-rays in the energy density range of 0.15 to 0.55 J/cm2 The characteristic X-ray absorptiog coeificient in silicon for these experiments was 1.6 ∼ 10 cm−1, resulting in most of the energy being absorbed in the first 100 nm of the wafer surface.

For wafers annealed in the energy density range of 0.3 to 0.4 J/cm2 backscattering and channeling measurements show recovery of the crystallinity of the damaged layer with incorporation of about 86% of the implanted arsenic onto substitutional lattice positions. Evidence of redistribution and flattening of the arsenic profile in the annealed wafer was observed in the backscattering data and confirmed by SIMS profiling. Detailed results on the electrical and structural properties of these annealed layers will be presented. High energy pulsed X-ray sources offer the unique capability of simultaneously exposing large numbers of wafers to an extremely uniform energy flux at much higher efficiencies than conventional lasers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 4: Symposium A – Laser and Electron-Beam Interactions with Solids , 1981 , 281
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Laser-Solid Interactions and Laser Processing – 1978, Ed. by Ferris, S. D., Leamy, H. J. and Poate, J. M., American Institute of Physics (1979, New York).Google Scholar
2. Laser and Electron Beam Processing of Materials, Ed. by White, C. W. and Peevey, P. S., Academic Press (1980, New York).Google Scholar
3. Laser and Electron-Beam Solid Interactions and Materials Processing, Ed. by Gibbons, J. F., Hess, L. D. and Sigmon, T. W., North Holland (1981, New York).Google Scholar
4. Gamo, K., Murakami, K., Kawabe, M., Namba, S. and Aoyagi, Y., Reference 3, p. 97.Google Scholar
5. Foti, G., Radiat. Eff. 48, 161 (1980).CrossRefGoogle Scholar
6. Kamins, T. I. and Rose, P. H., J. Appl. Phys., 50, (1979) p. 1308.CrossRefGoogle Scholar
7. Hodgson, R. T., Baglin, J. E. E., Pal, R., Neri, J. M. and Hammer, D. A., Appl. Phys. Lett., 37 187 (1980).CrossRefGoogle Scholar
8. Stallings, C., Nielsen, K. and Schneider, R., Appl. Phys. Lett., 29, 404 (1976).CrossRefGoogle Scholar
9. Stallings, C., Childers, K., Roth, I. and Schneider, R., Appl. Phys. Lett., 35, 524 (1979).CrossRefGoogle Scholar
10. Dahlbacka, G., Meins, C., Gilman, C., Helava, H., Roth, I., Buck, E., Stringfield, R., Dukart, R., Sincerney, P. and Schneider, R., Proceedings of the 41thInternational Conference on High Power Electron and Ion Beam Research and Technology, August 1981 (to be published).Google Scholar