Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-26T04:58:28.796Z Has data issue: false hasContentIssue false
  • English
  • Français

The Role Of Grain Noise In Eddy Current Inspection Of Titanium Alloys

Published online by Cambridge University Press:  10 February 2011

M. P. Blodgett  and
P. B. Nagy
M. P. Blodgett
Affiliation:
Metals, Ceramics, and NDE Division, Air Force Research Laboratory, Ohio 45433
P. B. Nagy
Affiliation:
Department of Aerospace Engineering and Engineering Mechanics, University of Cincinnati, Ohio 45221
Get access

Abstract

This paper discusses the role electrical anisotropy plays in the structural integrity assessment of polycrystalline titanium alloys from the standpoint of fatigue crack detection and the related issue of microstructural noise. In eddy current inspection of noncubic crystallographic classes of polycrystalline metals the electric anisotropy of individual grains produces an inherent microstructural variation or noise that is very similar to the well-known acoustic noise produced by the elastic anisotropy of both cubic and noncubic materials in ultrasonic characterization. The presented results demonstrate that although the electrical grain noise is detrimental in eddy current nondestructive testing for small flaws, it can be also exploited for characterization of the microstructure in noncubic polycrystalline materials such as titanium alloys in the same way acoustic grain noise is used for ultrasonic characterization of the microstructure in different materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 503: Symposium JJ – Nondestructive Characterization of Materials in Aging Systems , 1997 , 53
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Rose, J. H., “Ultrasonic backscatter from microstructure,” in Rev. Progr. Quant. Nondestr.Eval. Vol. 1 B (Plenum, New York, 1992) pp. 1677–1684.Google Scholar
2 Margetan, F. J., Thompson, R. B., and Yalda-Mooshabad, I., “Backscattered microstructural noise in ultrasonic toneburst inspections,” J. Nondestr. Eval. 13, 111–136 (1994).Google Scholar
3 Goebbels, K., “Structure analysis by ultrasonic radiation,” in Research Techniques in Nondestructive TestingVol. IV (Academic, New York, 1980) pp. 87–157.Google Scholar
4 Hecht, A., Thiel, R., Neumann, E., and Mundry, E., “Nondestructive determination of grain size in austenitic sheet by ultrasonic backscattering,” Mat. Eval. 39, 934–938 (1981).Google Scholar
5 Willems, H. and Goebbels, K., “Characterization of microstructure by backscattered ultrasonic waves,” Met. Sci. 15, 549–553 (1981).Google Scholar
6 Guo, C. B., Holler, P., and Goebbels, K., “Scattering of ultrasonic waves in anisotropic polycrystalline metals,” Acustica 59, 112–120 (1985).Google Scholar
7 Wooster, W. A., A Textbook on Crystal Physics (University Press, Cambridge, 1938).Google Scholar
8 Nye, J. F., Physical Properties of Crystals, Their Representation by Tensors and Matrices (Clarendon Press, Oxford, 1985).Google Scholar
9 Neighbor, J. E., “Eddy current method for measuring anisotropic resistivity,” J. Appl. Phys. 40, 3078–3080 (1969).Google Scholar
10 Tatamikov, V. M., “Use of probes for measuring the electrical conductance of anisotropic plates,” Meas. Tech. 13, 877–881 (1970).Google Scholar
11 Gordienko, V. I. and Rybachuk, V. G., “Device for measuring the anisotropy of electrical conductivity,” Meas. Tech. 32, 371–374 (1989).Google Scholar
12 Pitchumani, R., Liaw, P. K., Yao, D. C., Hsue, D. K., and Jeong, H., “Eddy current technique for the measurement of constituent volume fractions in a three-phase metal-matrix composite,” J. Comp. Mat. 28, 1742–1769 (1994).Google Scholar
13 Pitchumani, R., Liaw, P. K., Yao, D. C., Hsue, D. K., and Jeong, H., “Theoretical models for the anisotropic conductivities of two-phase and three-phase metal-matrix composites,” Acta. Metal. Mat. 43, 3045–3059 (1995).Google Scholar
14 Rossitier, P. L., The Electrical Resistivity of Metals and Alloys (Cambridge University Press, Cambridge, 1987) pp. 185–195.Google Scholar
15 Eylon, D., “Faceted fracture in beta annealed titanium alloys,” Met. Trans. A 10, 311–317 (1979).Google Scholar
16 Briggs, A., An Introduction to Scanning Acoustic Microscopy (Oxford University Press, Oxford, 1985). pp. 35–41.Google Scholar
17 Meaden, G. T., Electrical Resistance of Metals (Plenum, New York, 1965) p. 31.Google Scholar
18 Libby, H. L., Introduction to Electromagnetic Nondestructive Test Methods (Wiley-Interscience, New York, 1971).Google Scholar