Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-05-20T04:53:24.727Z Has data issue: false hasContentIssue false
  • English
  • Français

The Spray Deposition of Transition Metal Nitride thin Films Using Alcohol Based Precursor Solutions

Published online by Cambridge University Press:  10 February 2011

K. S. Weil  and
P. N. Kumta
K. S. Weil
Affiliation:
Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213
P. N. Kumta
Affiliation:
Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213
Get access

Abstract

A new alcohol solution based approach has been developed for preparing transition metal nitride thin films and coatings. In this technique, the metal of interest is dissolved as a chloride in acetonitrile, then chelated with triethanolamine to form a highly viscous solution which settles out of the solvent phase. The acetonitrile is then evaporated off and the remaining thick liquid precursor is easily diluted with water or methanol, yielding a semi-viscous liquid which can be used directly to coat various substrates. When heat treated under the appropriate conditions in ammonia, the precursor coating transforms to yield the corresponding nitride. This approach is currently being considered for preparing nitride-based thin film electrical components and has been successfully used thus far to spray deposit TaN and NbN nitride films onto silicon substrates. Results of the preliminary study on these two nitride films are discussed in this paper.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 495: Symposium W – Chemical Aspects of Electronic Ceramics Processing , 1997 , 227
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Adams, J. R. and Kramer, D. K., Surface Science 56, p. 482 (1976).Google Scholar
2. Oya, G.-I. and Onodera, T., J. Appl. Phys. 45, p. 1389 (1974).Google Scholar
3. Toth, L. E., Transition Metal Carbides and Nitrides. Academic Press, New York, 1971, pp. 18–22.Google Scholar
4. Auciello, O., Barnes, T., Chevacharoenkul, S., Schreiner, A. F., and McGuire, G. E., Thin Solid films 181, p. 65–73 (1989).Google Scholar
5. Keddie, J. L., Li, J., Mayer, J. W., and Giannelis, E. P., J. Am. Ceram. Soc. 74, p. 2937 (1991).Google Scholar
6. Narula, C. K., Demczyk, B. G., Czubarow, P., and Seyferth, D., J. Am. Ceram. Soc. 78, p. 1247 (1995).Google Scholar
7. Weil, K. S. and Kumta, P. N., Mat. Sci. and Eng. B 38, p. 109 (1996).Google Scholar
8. Weil, K. S. and Kumta, P. N., J. Sol. St. Chem. 128, p. 2 (1997).Google Scholar
9. Cotton, F. A. and Wilkinson, G., Advanced Inorganic Chemistry. John Wiley & Sons, New York 1988, pp. 776–954.Google Scholar
10. Weil, K. S. and Kumta, P. N., unpublished data.Google Scholar
11. Udovenko, V.V. and Stepanenko, O.N., Russ. J. of Inorg. Chem. 14, p. 91 (1969).Google Scholar
12. Sriram, M. A., Kumta, P. N., and Ko, E. I., Chem. Mater. 7, p. 859 (1995).Google Scholar
13. Powder Diffraction File #32–1283.Google Scholar
14. Powder Diffraction File #38–1155.Google Scholar