Hostname: page-component-76fb5796d-25wd4 Total loading time: 0 Render date: 2024-04-27T05:11:33.849Z Has data issue: false hasContentIssue false
  • English
  • Français

Strategy for the Integration of PLZT Thin Films on Base-Metal Foils for High Voltage Embedded Passives

Published online by Cambridge University Press:  26 February 2011

Beihai Ma ,
U. Balachandran ,
David Y Kaufman  and
Krishna Uprety
Beihai Ma
Affiliation:
bma@anl.gov, Argonne National Laboratory, Energy Systems Division, 9700 S. Cass Ave, Bldg. 212, Argonne, IL, 60439, United States, 630-252-9961
U. Balachandran
Affiliation:
balu@anl.gov, Argonne National Laboratory, Energy Systems Division, Argonne, IL, 60439, United States
David Y Kaufman
Affiliation:
dykaufman@gmail.com, Argonne National Laboratory, Energy Systems Division, Argonne, IL, 60439, United States
Krishna Uprety
Affiliation:
uprety@anl.gov, Argonne National Laboratory, Energy Systems Division, Argonne, IL, 60439, United States
Get access

Abstract

Evolution of electronic devices towards higher performance and smaller size requires the passive components to be embedded within a printed wire board (PWB). A “film-on-foil” approach is the most viable fabrication method. A high permittivity of lead lanthanum zirconate titanate (PLZT) thin film was coated on nickel foil by chemical solution deposition. Such a prefabricated capacitor sheet can be embedded into a PWB. However, formation of a parasitic low-permittivity interfacial layer of nickel oxide during thermal processing of the PLZT films considerably reduces the capacitance density. To eliminate this parasitic effect, conductive buffer layer of lanthanum nickel oxide (LNO) was coated by chemical solution deposition on nickel foil. We produced PLZT film-on-foil capacitors with capacitance densities as high as 1.5 μF/cm2 and breakdown field strength >1.4 MV/cm. With the desirable volumetric character, PLZT film-on-foil capacitors hold particular promise for use in high voltage embedded passives.

Keywords

ceramicthin filmcoating
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 969: Symposium W – Heterogeneous Integration of Materials for Passive Components and Smart Systems , 2006 , 0969-W03-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Borland, W., Doyle, M., Dellis, L., Renovales, O., and Majumdar, D., “Embedding Ceramic Thick-Film Capacitors into Printed Wire Boards,” Mater. Res. Soc. Symp. Proc., 833, 143–151 (2005).Google Scholar
2. Nelms, D., Ulrich, R., Schaper, L., and Reeder, S., “Anodization for Forming Thin Film Embedded Capacitors in MCM-D and MCM-L Substrates,” Proceedings of the 48th IEEE Electronic Components and Technology Conference, pp. 247–251, Institute of Electrical and Electronic Engineers, Piscataway, NJ (1998).Google Scholar
3. Zhang, W., Sasaki, K., and Hata, T., “Electrical Properties of Low-Temperature (450°C) Pb(Zr,Ti)O3 Films Prepared in Quasi-Metallic Mode by RF Reactive Sputtering,” Jpn. J. Appl. Phys., Part 1, 35 [9B], 5084–5088 (1996).Google Scholar
4. Zhu, Y., Zhu, J., Song, Y.J., and Desu, S.B., “Laser-Assisted Low Temperature Processing of Pb(Zr,Ti)O3 Thin Films,” Appl. Phys. Lett., 73 [14], 1958–1960 (1998).Google Scholar
5. Ihlefeld, J., Laughlin, B., Hunt-Lowery, A., Borland, W., Kingon, A., and Maria, J.P., “Copper Compatible Barium Titanate Thin Films for Embedded Passives,” J. Electroceramics, 14 [2], 95–102 (2005).Google Scholar
6. Dawley, J.T. and Clem, P.G., “Dielectric Properties of Random and <100> Oriented SrTiO3 and (Ba,Sr)TiO3 Thin Films Fabricated on <100> Nickel Tapes,” Appl. Phys. Lett., 81, 3028 (2002).+Oriented+SrTiO3+and+(Ba,Sr)TiO3+Thin+Films+Fabricated+on+<100>+Nickel+Tapes,”+Appl.+Phys.+Lett.,+81,+3028+(2002).>Google Scholar
7. Losego, M.D., Jimison, L.H., Ihlefeld, J.F., and Maria, J.-P., “Ferroelectric Response from Lead Zirconate Titanate Thin Films Prepared Directely on Low-Resistivity Copper Substrates,” Appl. Phys. Lett., 86, 172906 (2005).Google Scholar
8. Kingon, A.I. and Srinivasan, S., “Lead Zirconate Titanate Thin Films Directly on Copper Electrodes for Ferroelectric, Dielectric and Piezoelectric Applications,” Nature Materials, 4, 233–237 (2005).Google Scholar
9. Zou, Q., Ruda, H. E., and Yacobi, B. G., “Improved Dielectric Properties of Lead Zirconate Titanate Thin Films Deposited on Metal Foils with LaNiO3 Buffer Layers,” Appl. Phys. Lett., 78, 1282–1284 (2001).Google Scholar
10. Kaufman, D.Y., Sabha, S., and Uprety, K., “PLZT Film-on-Foil Capacitors for Embedded Passives,” Proceedings of the 12th US-Japan Seminar on Dielectric and Piezoelectric Ceramics, pp. 305–308, Annapolis, MD (November 2005).Google Scholar
11. Bao, D., Yao, X., Wakiya, N., Shinozaki, K. and Mizutani, N., “Preparation of Conductive LaNiO3 Film Electrodes by a Simple Chemical Solution Deposition Technique for Integrated Ferroelectric Thin Film Devices,” J. Phys. D - Appl. Phys., 36, 1217–1221 (2003).Google Scholar