Hostname: page-component-848d4c4894-2pzkn Total loading time: 0 Render date: 2024-05-15T12:50:46.808Z Has data issue: false hasContentIssue false
  • English
  • Français

Structure/Property Relationships in a Rapidly Solidified and Annealed Ternary Iron Aluminide

Published online by Cambridge University Press:  26 February 2011

B. Décamps ,
M.A. Gibsont ,
A.J. Morton  and
A. Wolfenden
B. Décamps
Affiliation:
CNRS, Métallurgie Structurale, Bât. 413,UniversitéParis-sud,91405, Orsay, France
M.A. Gibsont
Affiliation:
CSIRO, Div. of Materials Science and Technology, Clayton Vic. 3168, Australia
A.J. Morton
Affiliation:
CSIRO, Div. of Materials Science and Technology, Clayton Vic. 3168, Australia
A. Wolfenden
Affiliation:
Texas A&M University, Advanced Mats. Lab., College Station, TX 77843–3123, USA
Get access

Abstract

Rapidly solidified strips of Fe66.5-A128.5-Cr5 alloy with the addition of 0.5wt.% TiB2, were produced by planar flow strip casting. Correlations of the microstructure and room temperature mechanical properties were made for strips in the as-cast condition and after annealing at 1273K for periods up to 4hrs. The results showed that grain size, tensile strength, ductility, hardness and Young's modulus were very stable for the times investigated. Studies of tensile fracture surfaces revealed essentially 100% transgranular cleavage in the ascast strip with a greater tendency for intergranular failure after prolonged exposure to high temperatures. TEM studies of this alloy revealed diffraction patterns characteristic of DO3 ordering but the dislocations observed in both ascast and deformed specimens were those typical of the B2 structure without any extended APBs. This is attributed to the very fine DO3, domain size . At room temperature <111> slip is predominant.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 685
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stoloff, N.S. and Davies, R.G., Prog. Mater. Science 13, 1 (1966).Google Scholar
2. Liu, C.T., International Met. Rev. 29, 168 (1984).CrossRefGoogle Scholar
3. Mendiratta, M.G., Ehlers, S.K, Dimiduk, D.M., Kerr, W.R., Mazdiyasni, S. and Lipsitt, H.A., in High Temperature Ordered Intermetallic Alloys II, edited by Stoloff, N.S., Koch, C.C., Liu, C.T. and Izumi, O., (Mater. Res. Soc. Proc. 81, Pittsburgh, PA 1987) pp. 393–404.Google Scholar
4. Harmouche, M.R. and Wolfenden, A., J. Testing and Eval. 13, 424 (1985).Google Scholar
5. Baker, I. and Gaydosh, D.J., Metallography 20, 347 (1987).CrossRefGoogle Scholar
6. Mckamey, C.G., Horton, J.A. and Liu, C.T., J. Mater. Res. 4, 1156 (1989)CrossRefGoogle Scholar
7. Shunk, F.A., Constitution of Binary Alloys, Second Suppl, (McGraw-Hill, New York, 1969) p. 24.Google Scholar
8. Umakoshi, Y. and Yamaguchi, M., Phil. Mag. A 44, 711 (1981).CrossRefGoogle Scholar