Hostname: page-component-76fb5796d-5g6vh Total loading time: 0 Render date: 2024-04-29T16:58:32.936Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Characterization of Sputter Etched Polymer Films

Published online by Cambridge University Press:  21 February 2011

J. L. Grant ,
D. S. Dunn  and
D. J. McClure
J. L. Grant
Affiliation:
3M Corporate Research Laboratory, St. Paul, MN 55144.
D. S. Dunn
Affiliation:
3M Corporate Research Laboratory, St. Paul, MN 55144.
D. J. McClure
Affiliation:
3M Corporate Research Laboratory, St. Paul, MN 55144.
Get access

Abstract

The surface chemical changes induced in polystyrene, polypropylene and poly(ethylene terephthalate) (PET) by argon and oxygen rf sputter etching were studied by XPS and infrared reflection absorption spectroscopy (IRRAS). Thin (∼5nm) chemically modified surface layers were observed for all three materials. Polystyrene surfaces were oxidized by sputter etching in both oxygen and argon with differing chemical functionality resulting from etching in the different gases. Polypropylene surfaces, by contrast, were oxidized with similar chemical functionality resulting from etching in either gas. PET surfaces were oxidized slightly by oxygen sputter etching and reduced by argon sputter etching. For the model systems chosen, etch mechanisms are suggested based on trends in the chemical modification behavior.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 119: Symposium F – Adhesions in Solids , 1988 , 297
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Mirtich, M.J. and Sovey, J.S., J. Vac. Sci. Technol. 15, 697 (1978).Google Scholar
2. Chang, C.-A., Appl. Phys. Lett. 51, 1236 (1987).CrossRefGoogle Scholar
3. Maffitt, K.N. and Willson, R.F., U.S. Patent No. 4 340 276 (1982).Google Scholar
4. Banks, B.N. in Ion Bombardment Modification of Surfaces, edited by Auciello, O. and Kelly, R. (Elsevier, Amsterdam, 1984), Chapter 10.Google Scholar
5. Grant, J.L., Dunn, D.S. and McClure, D.J., J. Vac. Sci. Technol., in press.Google Scholar
6. Nuzzo, R.S., Wong, Y.-H. and Schwartz, G.P., Langmuir 3, 1136 (1987).CrossRefGoogle Scholar
7. Ullevig, D.M. and Evans, J.F., Anal. Chem. 52, 1467 (1980).CrossRefGoogle Scholar
8. Dunn, D.S. and McClure, D.J., J. Vac. Sci. Technol. A5, 1327 (1987).CrossRefGoogle Scholar
9. Dunn, D.S. and McClure, D.J., unpublished results.Google Scholar
10. Moss, S.J. in The Chemistry of the Semiconductor Industry, edited by Moss, S.J. and Ledwith, A. (Chapman and Hall, New York, 1987), Chapter 16.Google Scholar
11. Tsuda, M., Mat. Sci. Rep. Z., 191 (1987).Google Scholar