Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-05-20T20:03:45.871Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Treatment on Silicon Field-Emission Cathodes

Published online by Cambridge University Press:  14 March 2011

M. Hajra ,
N.N. Chubun ,
A.G. Chakhovskoi  and
C.E. Hunt
M. Hajra
Affiliation:
Electrical and Computer Engineering Department, University of California, Davis, CA. 95616, Phone (530)-752-2735, Fax (530)-754-9217, e-mail: mshajra@ece.ucdavis.edu
N.N. Chubun
Affiliation:
Electrical and Computer Engineering Department, University of California, Davis, CA. 95616, Phone (530)-752-2735, Fax (530)-754-9217
A.G. Chakhovskoi
Affiliation:
Electrical and Computer Engineering Department, University of California, Davis, CA. 95616, Phone (530)-752-2735, Fax (530)-754-9217
C.E. Hunt
Affiliation:
Electrical and Computer Engineering Department, University of California, Davis, CA. 95616, Phone (530)-752-2735, Fax (530)-754-9217
Get access

Abstract

Arrays and single-tip p-type silicon micro-emitters have been formed using a subtractive tip fabrication technique. Following fabrication, several different surface treatments have been attempted for comparison. We utilized ion and electron bombardment at elevated pressures (with interrupted pumping), and also hydrogen seasoning during field emission operation. The objectives of these treatments include stabilization of the emission, lowering the effective workfunction, and reducing low-frequency noise. The tips were evaluated using I-V measurements in the diode configuration. A flat Si anode, spaced nominally 6 μm and 150 μm from the cathode, was used. For the purpose of treatment, the field emission characteristics are measured in a high vacuum chamber at a pressure range between 10−5 and 10−8 Torr. The results suggest that the emitters benefit from seasoning or conditioning, for optimal performance, low noise, minimum work function and maximum reproducibility and reliability over the lifetime of the cathode.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 621: Symposia Q/R – Electron-Emissive Materials, Vacuum Microelectronics… , 2000 , R1.4.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Trujillo, J. T. and Hunt, C. E., low-voltage silicon gated field-emission cathodes for vacuum microelectronics and e-Ream applications, JVST B, 11 (2), 1993, pp. 454–458,Google Scholar
2. Marcus, R.B, Ravi, T.S, and Gmitter, T., Chin, K., Liu, D., Orvis, W.J and Ciarlo, D.R., Hunt, C.E. and Trujillo, J., Formation of Silicon tips with <1nm radius, Appl.Phys. Lett. 56(3), 15 January 1990, pp 236–238.Google Scholar
3. Meyer, R., presented at the 9th IVMC Conference, Kyongju, Korea, 1997 (unpublished).Google Scholar
4. Advanced Porous Getters. St 172 Series. Technical publication G870530. SAES getters S.p.a. Milano, 1987.Google Scholar