Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-28T08:03:38.850Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of Titanium and Boron Containing Polymers: Potential Precursors for Advanced Ceramics

Published online by Cambridge University Press:  22 February 2011

Kenneth E. Gonsalves  and
K. T. Kembaiyan
Kenneth E. Gonsalves
Affiliation:
Stevens Institute of Technology, Department of Chemistry and Chemical Engineering, Hoboken, New Jersey 07030
K. T. Kembaiyan
Affiliation:
Stevens Institute of Technology, Department of Chemistry and Chemical Engineering, Hoboken, New Jersey 07030
Get access

Abstract

Titanium containing fibers have been synthesized via the modification of organic materials. Thermal processing of these chemically modified organic fibers in reactive/inert atmospheres, has produced materials containing Ti (C,O). Materials analysis was performed using SEM-EDS, ESCA and Auger spectroscopy. Novel monomeric titanium materials were synthesized for the above mentioned modification of organic materials. Boron containing monomers and polymers were also synthesized as possible precursors for B-N-C materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 120: Symposium G – High-Temperature/High-Performance Composites , 1988 , 199
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Corbin, N.D., Resetar, T.M. and McCauley, J.W. in Innovations in Materials Processing”, Sagamore Army Materials Research Conference, Bruggerman, G. and Weiss, V. Eds. Vol.30, Plenum, New York 1985.Google Scholar
[2] Jain, M.K. and Abhiraman, A.S.. J. Mater. Sci. 22, 278 (1987).CrossRefGoogle Scholar
[3] Wynne, W.J. and Rice, R.W. Ann. Rev. Mater. Sci. 14, 297 (1984).CrossRefGoogle Scholar
[4] Coerver, H.J. and Curran, C., J. Am. Chem. Soc. 80, 3522 (1958).CrossRefGoogle Scholar
[5] Chandra, G., George, T.A. and Lappert, M.F. Chem. Commun. 116 (1967); G. Chandra, A.D. Jenkins, M.F. Lappert and R.C Srivastf7v J. Chem. Soc. (A) 2550 (1970).Google Scholar
[6] Gonsalves, K. and Agarwal, R., J. Applied Polym. Sci. (in press).Google Scholar
[7] Bradley, D.C. and Thomas, I.M. J. Chem. Soc. 3857 (1960).Google Scholar
[8] Jenkins, A.D., Lappert, M.F. and Srivastava, R.C., Polym. Journal 7, 289 (1971).Google Scholar
[9] Braun, D., Chedron, H. and Kern, W.. “Techniques of Polymer Synthesis and Characterization”, Wiley, New York (1971) p. 132.Google Scholar
[10] Gonsalves, K. and Agarwal, R., Applied Organomet. Chem. (in press).Google Scholar