Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-16T11:40:18.089Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Reliability of Pt/Ti/Pt/Au Schottky Contact on InP with a GalnP Schottky Barrier Enhancement Layer

Published online by Cambridge University Press:  10 February 2011

H. C. Kuo ,
C. H. Lin ,
B. G. Moser ,
H. Hsia ,
Z. Tang ,
H. Chen ,
M. Feng  and
G. E. Stillman
H. C. Kuo
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
C. H. Lin
Affiliation:
Department of Material Science and Engineering, Material Research Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
B. G. Moser
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
H. Hsia
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
Z. Tang
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
H. Chen
Affiliation:
Department of Material Science and Engineering, Material Research Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
M. Feng
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
G. E. Stillman
Affiliation:
Department of Electrical and Computer Engineering, Microelectronics Laboratory University of Illinois at Urbana-Champaign, Urbana, IL 61801.
Get access

Abstract

We present the studies of the thermal stability of various metal including Au, Ti, Pt, Pd and Pt/Ti/Pt/Au Schottky contacts on strained Ga0.2In0.8P/InP semiconductors. Auger electron spectroscopy (AES) analysis and cross-sectional TEM of the thermally annealed Schottky diode were performed to investigate the failure mechanism. For Pt/Ti/Pt/Au schottky contacts on strained GalnP/InP, no significant change was found for samples annealed up to 350°C. However, a drastic degradation of the barrier height and the ideality factor was observed in samples annealed at 400°C, which may be caused by the interdiffusion and penetration of metals into the semiconductor. Finally InGaAs/InP doped channel heterojunction FET's (DC-HFET's) with a GaInP Schottky barrier enhancement layer (SBEL) were grown and fabricated. The 0.25 μm gate-length devices showed excellent DC and RF performance, with anfi of 117 GHz and an fmax of 168 GHz.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 535: Symposium D/I – III-V and IV-IV Materials & Processing Challenges for Highly… , 1998 , 231
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kendelewicz, T., Newman, N., List, R. S., Lindau, I., and Spicer, W. E., J. Vac. Sci. technol. B 3, 1206 (1985).Google Scholar
2. Loualiche, S., Ginudi, A., Corre, A. Le, Lecroisnier, D., Vaudry, C., Henry, L., Guillemot, C., IEEE Electron. Device Lett., 11, (4), 153–155 (1990).Google Scholar
3. Langer, J. M. and Heinrich, H., Phys. Rev. Lett, 55, 1414 (1985).Google Scholar
4. Fujita, S., Noda, T., Nozaki, C., Ashizawa, Y., IEEE Electron. Device Lett., 14, (5), 259–261 (1993).Google Scholar
5. Sze, S. M., ”Physics of semiconductor devices,” 2nd ed., John Wiley & Sons, Inc., 279–293, (1981).Google Scholar
6. Schroder, D. K. ”Semiconductor material and device characterization,” John Wiley & Sons, Inc., 130–137, (1990).Google Scholar