Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-05-16T01:50:32.064Z Has data issue: false hasContentIssue false

Thermally Induced Stresses and Strains in Laser Processing of Thin Films

Published online by Cambridge University Press:  22 February 2011

Judah A. Tuchman
Affiliation:
Department of Applied Physics, Columbia University, New York, NY 10027
Lisa P. Welsh
Affiliation:
Department of Applied Physics, Columbia University, New York, NY 10027
Irving P. Herman
Affiliation:
Department of Applied Physics, Columbia University, New York, NY 10027
Get access

Abstract

The stresses and strains induced in thermal laser processing of substrates and thin films on substrates, are obtained in terms of single integrals by solving the thermoelastic equations using a Gaussian profile laser as the heating source. This analysis is applied to silicon thin films on fused silica and sapphire substrates. In part, this study shows that defects can form in the films because the stresses induced during high temperature laser processing of silicon and similar materials can exceed the yield stress under certain experimental conditions.

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Welsh, L. P., Tuchman, J. A. and Herman, I. P., J. Appl. Phys 64, 6274 (1988).10.1063/1.342086Google Scholar
2. Lax, M., J. Appl. Phys. 48. 3919 (1977); Appl. Phys. Lett. 31,786 (1978).10.1063/1.324265CrossRefGoogle Scholar
3. Youngdahl, C. K., Int. J. Engin. Sci. 7, 61 (1969).10.1016/0020-7225(69)90023-8Google Scholar
4. Siethoff, H. and Haasen, P., in Lattice Defects in Semiconductors edited by Hasiguti, P. R. (University Press, Tokyo, 1968), p. 491.Google Scholar