Hostname: page-component-848d4c4894-ttngx Total loading time: 0 Render date: 2024-06-11T06:30:43.038Z Has data issue: false hasContentIssue false

Tritium and Iodide Diffusion through Opalinus Clay

Published online by Cambridge University Press:  21 March 2011

A. Yllera de Llano
Affiliation:
CIEMAT, Dpto. de Impacto Ambiental de la Energía. Avda. Complutense, 22, 28040 Madrid, Spain Email: abel.yllera@ciemat.es
M. Mingarro Sainz-Ezquerra
Affiliation:
CIEMAT, Dpto. de Impacto Ambiental de la Energía. Avda. Complutense, 22, 28040 Madrid, Spain
M. García Gutiérrez
Affiliation:
CIEMAT, Dpto. de Impacto Ambiental de la Energía. Avda. Complutense, 22, 28040 Madrid, Spain
Get access

Abstract

The International Mont Terri Project [1, 2] started in 1995 under the patronage of the Swiss National Hydrological and Geological Survey (SNHGS), and has the authorization of the République et Canton du Jura. The underground rock laboratory is located at the northwestern part of Switzerland (Canton Jura), in and beside the reconnaissance gallery of the Mont Terri motorway tunnel, one of the several tunnels of the A16 “Transjurane” motorway. The depth of overburden above the rock laboratory is approximately 300 meters.

The project is aimed to investigate the geological, hydrogeological, geochemical and rock mechanical properties of the Opalinus Clay for assessing the feasibility and safety of a repository for radioactive waste placed in this type of host rock. One of the issues under study is radionuclide migration by diffusion through clays. As a part of this investigation, an interlaboratory comparison on small-scale diffusion experiments was carried out by three research laboratories: AEA Technology (UK), SCK·CEN (Belgium) and CIEMAT (Spain). The radionuclides investigated were tritium and iodine. This paper concerns to the methodological approach and results of the experiments undertaken by CIEMAT.

The effective diffusion coefficients were measured for tritiated water and iodine (as I-), resulting larger for tritium [(1.7±0.4)×10−11 m2/s] than for iodide [(2.7±0.3)×10−12 m2/s]. The porosity available for diffusion was calculated by using the time-lag method, but some results seemed unrealistic and showed a large variability. In general, tritium exhibited higher values of porosity than iodide (17 to 26% and 12 to 17%, respectively), which were consistent with the anion exclusion affecting the distribution of iodide into the clay pores.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Thury, M. and Bossart, P., Engineering Geology, 52, 347359 (1999).Google Scholar
2.Project website: http://sol;www.mont-terri.ch/Google Scholar
3. Brookins, D.G., Eh-pH Diagrams for Geochemistry (Springer-Verlag, Berlin, 1988), p. 175.Google Scholar
4. AENOR, Norma UNE 103-302-94 (1994).Google Scholar
5. AENOR, Norma UNE 7045 (1952).Google Scholar
6. Mazurek, M., in Mont Terri Rock Laboratory, Geological Report 23, edited by Burkhalter, R. (Swiss National Hydrological and Geological Survey, 1999), pp. 1518.Google Scholar
7. Pearson, F.J., Mont Terri Project Internal Report (TN 99-31), 1999.Google Scholar
8. Crank, J., The Mathematics of Diffusion (2nd Edition), Oxford University Press (1975), p. 414.Google Scholar
9. Lever, D.A., UKAEA Harwell Report, AERE R-12321 (1986), p. 24.Google Scholar
10. Bourke, P.J., Jefferies, N.L., Lever, D.A. and Lineham, T.H., in Geochemistry of Clay-Pore Fluid Interactions, edited by Manning, A.C., Hall, P.L. and Hughes, C.R. (Chapman & Hall, London, 1993), pp. 331350.Google Scholar
11. Horseman, S.T., Higgo, J.J.W., Alexander, J. and Harrington, J.F., OECD/NEA REPORT CC- 96/1 (1996).Google Scholar
12. Yu, J.W. and Neretnieks, I., SKB Technical Report (TR 97-12, 1997).Google Scholar