Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-20T09:02:23.317Z Has data issue: false hasContentIssue false

YBa2Cu3O7−x Grain Boundary Weak Links on MgO Bicrystal

Published online by Cambridge University Press:  26 February 2011

H. B. Lu
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
S. L. Tu
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
J. J. Wang
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
J. Lin
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
T. W. Huang
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
S. J. Yang
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
S. E. Hsu
Affiliation:
Materials R&D Center, Chung Shan Institute of Science and Technology, Lung-Tan, Taoyuan, Taiwan 32526, Republic of China
Get access

Abstract

The characteristics of YBa2Cu3O7−x (YBCO) thin films by laser ablation on MgO bicrystals have been investigated. The bicrystals were fabricated by hot pressing two single crystals with the configuration of [001] tilt boundaries. The YBCO films were epitaxial grown with C-axis normal to the both adjacent grains of bicrystals. The FWHM about (005) reflection was 0.4–0.5 degree, indicating the high degree of the oriention for the film with small mosaic spread. Our preliminary study showed that the typical value of Jc on either side of the bicrystal boundary was 0.4–10×106 A/cm2 at 15K, while that across the 10° tilt boundaries was 0.3–9×105 A/cm2 at 15K. These results implied that the artificial grain boundaries effectively weakened the supercurrent, and therefore, the weak-link properties of artificial boundaries were more easily controllable than those of naturally occuring grain boundaries.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Dimos, D., Chaudhari, P., Mannhart, J., and LeGoues, F.K., Phys. Rev. Lett., 611 (1988) 219 Google Scholar
2) Russek, S. E., Lathrop, D. K., Moeckly, B. H., Buhurman, R. A., Shin, D. H., and Silcox, J., Appl. Phys. Lett., 57 (1990) 1155 Google Scholar
3) Koch, R. H., Gallagher, W. J., Bumble, B., and Lee, W. Y., Appl. Phys. Lett., 54 (1989) 951 Google Scholar
4) Char, K., Colclough, M. S., Garrison, S. M., Newman, N., and Zaharchuck, G., Appl. Phys. Lett., 59 (1991) 733 Google Scholar
5) Dimos, D., Chaudhari, P., and Mannhart, J., Phys. Rev. B, 41(7)(1990) 4038 Google Scholar
6) Ivanov, Z. G., Nilson, P. A., Winkler, D., Alarco, J. A., and Claeson, T., Appl. Phys. Lett., 59 (1991) 3030 Google Scholar
7) Shin, D. H., Silcox, J., Russek, S. E., Lathrop, D. K., Moeckly, B., and Buhrman, R. A., Appl. Phys. Lett., 57 (1990) 508 Google Scholar
8) Gross, R., Chaudhari, P., Kawasaki, M., Ketenen, M. B., and Gupta, A., Appl Phys. Lett., 57 (1990) 727 Google Scholar
9) Ravi, T. S., wang, D. M. H., Ramesh, R., Chan, S. W., Nazar, L., Chen, C. Y., Inam, A., and Venkatesan, T., Phys. Rev. B, 42 (1990) 10141 Google Scholar
10) Moeckly, B. H., Russek, S. E., Lathrop, D. K., Buhrman, R. A., Norton, M. G., and Carter, C. B., Appl. Phys. Lett., 57 (1990) 2951 Google Scholar
11) Zhu, Y., Zang, H., Wang, H., and Suenaga, M., J. Mater. Res., 6 (1991) 2507 Google Scholar
12) Irie, A., Sasahara, H., Yamashita, T., Kurosawa, H., Yamane, H., and Hirai, T., IEEE Trans, on Mag., 27 (1991) 3032 Google Scholar