Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-05-04T09:45:50.030Z Has data issue: false hasContentIssue false
  • English
  • Français

Techniques for impregnation of friable specimens

Published online by Cambridge University Press:  26 July 2017

Neil A. Wells
Neil A. Wells*
Affiliation:
Department of Geology, Kent State University, Kent, Ohio 44242
Get access

Extract

A large variety of techniques and chemicals are available to aid the study of fractured and otherwise friable material. Many of the techniques are quite complex, well beyond what someone might wish to do for a once-in-a-while project. This paper will review a series of methods that range from simple to the very forceful and complex techniques needed for specimens with very low permeability. However, it will empasize both the simpler methods and those that have been published since the classic works of Bouma (1969, especially p.1–139, 260–290, & 377–378), Stanley (1971), and Allman and Lawrence (1972, p.73–92).

Type
Internal Anatomy and Microstructure
Information
The Paleontological Society Special Publications , Volume 4: Paleotechniques , 1989 , pp. 132 - 141
Copyright
Copyright © 1989 Paleontological Society 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Allman, M., and Lawrence, D.F. 1972. Geological Laboratory Techniques. Blanford, London, 335 p.Google Scholar
Arnold, Z.M. 1965. The vacuum oven for impregnating microfossils, p. 262–263. In Kummel, B., and Raup, D. (eds.), Handbook of Paleontological Techniques. Freeman, San Francisco.Google Scholar
Ashley, G.M. 1973. Impregnation of fine-grained sediments with a polyester resin: a modification of Altemuller's method. Journal of Sedimentary Petrology, 43:298–301.Google Scholar
Barr, J.L., Dinkelman, M.G., and SandUsky, C.L. 1970. Large epoxy peels. Journal of Sedimentary Petrology, 40:445–449.CrossRefGoogle Scholar
Bouma, A.H. 1969. Methods for the Study of Sedimentary Structures. Wiley, NY, 458 p.Google Scholar
Brown, W.E., and Patnode, H.W. 1953. Plastic lithification of sands in situ . American Association of Petroleum Geologists Bulletin, 37:152–162.Google Scholar
Burger, J.A., Klein, G. deV., and SandErs, J.E. 1969. A field technique for making epoxy relief-peels in sandy sediments saturated with saltwater. Journal of Sedimentary Petrology, 39:338–341.CrossRefGoogle Scholar
Cavanaugh, R.J., and Knutson, C.F. 1960. Laboratory technique for plastic saturation of porous rocks. American Association of Petroleum Geologists Bulletin, 44:628–640.Google Scholar
Conway, J.S. 1982. A simplified method for impregnation of soils and similar clay-rich sediments. Journal of Sedimentary Petrology, 52:650–651.CrossRefGoogle Scholar
Crevello, P.D., Rine, J.M., and Lanesky, D.E. 1981. A method for impregnating unconsolidated cores and slabs of calcareous and terrigenous muds. Journal of Sedimentary Petrology, 51:658–660.Google Scholar
Franklin, J.A. 1969. Rock impregnation trials using monomers, epoxide, and unsaturated polyester resins. Journal of Sedimentary Petrology, 39:1251–1253.CrossRefGoogle Scholar
Gillot, J.E. 1974. Methods of sample preparation for microstructural analysis, p. 143–164. In Rutherford, G.K. (ed.), Soil Microscopy. Limestone Press, Ontario.Google Scholar
Ginsburg, R.N., Bernard, H.A., Moody, R.A., and Daigle, E.E. 1966. The Shell method of impregnating cores of unconsolidated sediments. Journal of Sedimentary Petrology, 36:1118–1125.Google Scholar
Honjo, S., and Fischer, A.G. 1965. Thin sections and peels for high-magnification study and phase-contrast microscopy, p. 241–247. In Kummel, B., and Raup, D. (eds.), Handbook of Paleontological Techniques. Freeman, San Francisco.Google Scholar
Klein, G.deV. 1971. Peels and impressions. Chapter 10, p. 217–250. In Carver, R.E. (ed.), Procedures in Sedimentary Petrology. Wiley-Interscience, New York.Google Scholar
Martin, R., Litz, P.E., and Huff, W.D. 1979. A new technique for making thin sections of clayey sediments. Journal of Sedimentary Petroloev, 49:641–643.CrossRefGoogle Scholar
Minoura, N., and Conley, C.D. 1971. Technique for impregnating porous rock samples with low-viscosity epoxy resins. Journal of Sedimentary Petrology, 41:858–861.Google Scholar
Palmer, S.N., and Barton, M.E. 1986. Avoiding microfabric disruption during the impregnation of friable, uncemented sands with dyed epoxy. Journal of Sedimentary Petrology, 56:556–557.CrossRefGoogle Scholar
Stanley, D.J. 1971. Sample impregnation. Chapter 9, p. 183–216. In Carver, R.E. (ed.), Procedures in Sedimentary Petrology. Wiley-Interscience, New York.Google Scholar
Tourtelot, H.A. 1961. Thin sections of clay and shale. Journal of Sedimentary Petrology, 31:130–132.Google Scholar
Tucker, M.E. 1988. Techniques in Sedimentology. Blackwell, Oxford, 394 p.Google Scholar
Voigt, E. 1933. Die Übertragung fossiler Wirbeltierleichen auf Zellulose-Filme, eine neue Bergungsmethode für Wirbeltiere aus der Braunkohle. Paläontologische Zeitschrifte, 15:72–78.Google Scholar
Voigt, E. 1935. Die Erhaltung von Epithelzellen mit Zelkernen, von Chromatophoren und Corium in fossiler Froschhaut aus der mitteleozanen Braunkohle des Geiseltales. Nova Acta Leopoldina, New Series, 3:339–360.Google Scholar
Waldo, A.W., and Yuster, S.T. 1937. Method of impregnating porous materials to facilitate pore studies. American Association of Petroleum Geologists Bulletin, 21:259–267.Google Scholar