Hostname: page-component-76fb5796d-22dnz Total loading time: 0 Render date: 2024-04-26T17:01:57.514Z Has data issue: false hasContentIssue false
  • English
  • Français

Carbon and Oxygen Incorporations into Surface Layers During Titanium Implantation

Published online by Cambridge University Press:  26 February 2011

Y. Fukui ,
Y. Hirose  and
M. Iwaki
Y. Fukui
Affiliation:
Hanshin Research and Development Laboratories, Nisshin Steel Co., Ltd., 5 Ishizunishi-machi, Sakai, Osaka, 592, Japan
Y. Hirose
Affiliation:
Hanshin Research and Development Laboratories, Nisshin Steel Co., Ltd., 5 Ishizunishi-machi, Sakai, Osaka, 592, Japan
M. Iwaki
Affiliation:
The Institute of Physical and Chemical Research(RIKEN), 2-1 Hirosawa, Wako, Saitama, 351–01, Japan
Get access

Abstract

A study has been made of incorporations of carbon and oxygen into surfaces of fourteen kinds of specimens during titanium implantation by means of AES sputter depth profiling. The specimens used were Fe, Al, Cu, Si, Cr, Ta, Co, Ni', Mo, Ti, Au, Pt, Pd and Fe-4.5at%C, which were implanted with titanium to a fluence of 2×1017 ions/cm2 in a vacuum of ∼2×10−4 Pa at room temperature. The fourteen kinds of specimens implanted with titanium were classified into three groups according to the amounts of incorporated carbon and oxygen from a vacuum to the surfaces. The first group corresponds to Fe, Ni, Co, Al and Fe-4.5at%C, in which surfaces a large amount of carbon is incorporated. The second group corresponds to Al, Ti and Ta, in which surfaces a large amount of oxygen is incorporated. The third group corresponds to Cu, Si, Cr, Mo, Au, Pt and Pd, in which surfaces carbon and oxygen are little incorporated. In the cases of Cu, Au, Pt and Pd, little incorporations of carbon and oxygen are caused by the high sputtering yield and the less adsorptive power of the specimens.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 100: Symposium – A Fundamentals of Beam-Solid Interactions and Transient Thermal Processing , 1988 , 191
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Singer, I. L., Vacuum 30, 853(1984).Google Scholar
2. Iwaki, M.,Yabe, K., Suzuki, M. and Nishimura, O., Nucl. Inst. Methods B19/20, 150(1987).Google Scholar
3. Kral, J. and Zenek, J., Vacuum 36, 555(1986).Google Scholar
4. Follstaedt, D. M., Nucl. Inst. Methods B10/11, 549(1985).Google Scholar
5. Roquais, J.M.,Fevennec, P.N., Salvi, M. and Quemerais, A., Nucl. Inst. Methods B22, 528(1987).Google Scholar
6. Okabe, Y., Iwaki, M., Takahashi, K., and Yoshida, K., Jpn. J. Appl. Phys. 22, L165(1983).Google Scholar
7. Matunami, N.,Yamamura, Y., Miyagawa, S., Morita, K. and Simizu, R., Radiat. Eff. Lett. 50, 39(1980).Google Scholar
8. Hayward, D. O. and Trapnell, B. M. W., Chemisorption (Butterworths 1964).Google Scholar