Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-26T21:08:48.706Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Effects between AHSS Dissimilar Joints Using MIG and TIG Welding Process

Published online by Cambridge University Press:  11 May 2015

G.Y. Pérez Medina ,
M. Padovani ,
M. Merlin ,
A.F. Miranda Pérez  and
F.A. Reyes Valdés
G.Y. Pérez Medina
Affiliation:
Corporación Mexicana de Investigación en Materiales (COMIMSA) E-mail: gladysperez@comimsa.com
M. Padovani
Affiliation:
Engineering Department, University of Ferrara, Via Saragat 1, 44122, Ferrara, Italy
M. Merlin
Affiliation:
Engineering Department, University of Ferrara, Via Saragat 1, 44122, Ferrara, Italy
A.F. Miranda Pérez
Affiliation:
Corporación Mexicana de Investigación en Materiales (COMIMSA) E-mail: gladysperez@comimsa.com
F.A. Reyes Valdés
Affiliation:
Corporación Mexicana de Investigación en Materiales (COMIMSA) E-mail: gladysperez@comimsa.com
Get access

Abstract

Gas tungsten arc welding-tungsten inert gas (GTAW-TIG) is focused in literature as an alternative choice for joining high strength low alloy steels; this study is performed to compare the differences between gas metal arc welding-metal inert gas (GMAW-MIG) and GTAW welding processes. The aim of this study is to characterize microstructure of dissimilar transformation induced plasticity steels (TRIP) and martensitic welded joints by GMAW and GTAW welding processes. It was found that GMAW process lead to relatively high hardness in the HAZ of TRIP steel, indicating that the resultant microstructure was martensite. In the fusion zone (FZ), a mixture of phases consisting of bainite, ferrite and small areas of martensite were present. Similar phase’s mixtures were found in FZ of GTAW process. The presence of these mixtures of phases did not result in mechanical degradation when the GTAW samples were tested in lap shear tensile testing as the fracture occurred in the heat affected zone. In order to achieve light weight these result are benefits which is applied an autogenous process, where it was shown that without additional weight the out coming welding resulted in a high quality bead with homogeneous mechanical properties and a ductile morphology on the fracture surface. Scanning electron microscopy (SEM) was employed to obtain information about the specimens that provided evidence of ductile morphology.

Keywords

JoiningWeldingalloyhardnessScanning electron microscopy
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1766: Symposium 5B – Structural and Chemical Characterization of Metals, Alloys, and Compounds—2014 , 2015 , pp. 29 - 35
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Samek, L., De Moor, E., Penning, J., Speer, J.G., De Cooman, B.C., Metallurgical and Materials Transactions A, 39, 2542 (2008).CrossRefGoogle Scholar
De Amar, K., Speer, J.G., Matlock, D.K., Advanced Materials and Processes, 161, 27 (2003).Google Scholar
Zhang, M., Zhu, F., Zheng, D., Journal of Iron and Steel Research, International, 18, 73 (2011).Google Scholar
Maurizio Mini, M., Expert System with Applications, 38, 7911 (2011).Google Scholar
Tumuluru, M.D., Welding Journal, 85, 31 (2006).Google Scholar
Oliver, S., Jones, T.B., Fourlaris G, T.B, Mater Charact., 58, 390 (2007).CrossRefGoogle Scholar
Dinda, S., Diaz, R., Advanced Technologies and Processes 5 (1995) .Google Scholar
Thewlis, G., Materials Science and Technology, 20, 143 (2001).CrossRefGoogle Scholar
Villavicencio, J.C., Tésis Relación, microestructura/propiedad en la soldadura GTAW entre aceros inoxidables y aceros al carbono, (2010).Google Scholar
Porter, D.A. and Easterling, K.E., Taylor and Francis, 383.Google Scholar
Mohandas, T., Madhusudan Reddy, G., Satish Kumar, B., Journal of Materials Processing Technology, 88, 284 (1999).CrossRefGoogle Scholar
Yaowu, S., Zhunxiang, H., Journal of Materials Processing Technology, 207, 30 (2008).Google Scholar
Zhang, M., Li, L., Fu, R., Zhang, J., Wan, Z., Journal of Iron and Steel Research, International, 15, 61 (2008).CrossRefGoogle Scholar