Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-26T05:38:24.928Z Has data issue: false hasContentIssue false
  • English
  • Français

Use of Microwaves for Nondestructive Material Inspection

Published online by Cambridge University Press:  10 February 2011

B. R. Hokkanen  and
J. F. Lindsey III
B. R. Hokkanen
Affiliation:
Department of Technology, Southern Illinois University at Carbondale Carbondale, IL 62901-6603
J. F. Lindsey III
Affiliation:
Department of Technology, Southern Illinois University at Carbondale Carbondale, IL 62901-6603
Get access

Abstract

Wideband S-parameter measurements have been used to investigate the properties of electrically non-conductive materials using a vector network analyzer. Using S21 scattering parameters, amplitude and phase shift measurements were taken for a variety of both homogeneous and heterogeneous materials. With these initial S-parameter measurements as a reference, surface defects were modeled on the test samples and the S-parameter measurements were reevaluated. The effect of varying levels of moisture absorption in certain materials was also investigated. The results of this study indicate that there is indeed potential for the use of a vector network analyzer as a nondestructive testing tool to evaluate the structural integrity and/or moisture content of electrically non-conductive materials through the transmission of microwave energy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 430: Symposium O – Microwave Processing of Materials V , 1996 , 59
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Schneiderman, R., Microwaves & RF 33, 33–34+ (1994).Google Scholar
2. Gopalsami, N., Bakhtiari, S., Dieckman, S.L., Raptis, A.C., and Lepper, M.J., Mater. Eval. 52, 412–415 (1994).Google Scholar
3. Bolomey, J.C. and Joachimowicz, N. in Dielectric Metrology via Microwave Tomography: Present and Future, edited by Iskander, M.F., Lauf, R.J., and Sutton, W.H. (Mater. Res. Soc. Proc. 347, Pittsburgh, PA, 1994) pp. 259–268.Google Scholar
4. Zoughi, R., Gray, S.D., and Nowak, P.S., ACI Mater. Journal 92, pp. 64–70 (1995).Google Scholar
5. James, W.L., Yen, Y.H., and King, R.J., A Microwave Method for Measuring Moisture Content. Density. and Grain Angle of Wood, Res. Note FPL-0250 (U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, 1985).Google Scholar
6. Candy, J.V. and Pichot, C., IEEE Trans. on Antennas and Prop. 39 (3), 285–290 (1991).Google Scholar
7. Funk, E.E. and Saddow, S.E., Low Cost Conical Ultra-Wideband Antenna, Report. No. ARLTR- 302 (U.S. Army Research Laboratory, Adelphi, 1994).Google Scholar
8. Rudge, A.W., et al, ed., The Handbook of Antenna Design, (Peregrinus on behalf of the Institution of Electrical Engineers, Stevenage, 1986), pp. 278–279.Google Scholar
9. Montgomery, D.C., Design and Analysis of Expriments, (Wiley and Sons, New York, 1976).Google Scholar