Hostname: page-component-76fb5796d-2lccl Total loading time: 0 Render date: 2024-04-26T10:23:03.227Z Has data issue: false hasContentIssue false
  • English
  • Français

Anodic Oxidation of Nitrogen-Added Al-Based Alloys for Thin-Film Transistors

Published online by Cambridge University Press:  10 February 2011

Toshiaki Arai  and
Hideo Iiyori
Toshiaki Arai
Affiliation:
IBM Yamato Laboratory, 1623–14 Shimo-tsuruma, Yamato-shi, Kanagawa 242, Japan
Hideo Iiyori
Affiliation:
IBM Yamato Laboratory, 1623–14 Shimo-tsuruma, Yamato-shi, Kanagawa 242, Japan
Get access

Abstract

Novel anodized films of nitrogen-added aluminum-based alloys were proposed for use in the fabrication of gate insulators for thin-film transistors, and the effect of nitrogen addition on the anodized aluminum-based alloys was investigated. Gadolinium and neodymium were employed as alternative alloy components. The film thickness, the dielectric constant, and the roughness average of the anodized films decreased as the nitrogen content increased, and the nitrogen content was required to be lower than 20 at.%. The most improved values of the breakdown electric fields of anodized aluminum-gadolinium and aluminum-neodymium alloy were 10.1 MV/cm with 6.0 at.% nitrogen content and 9.9 MV/cm with 4.0 at.% nitrogen content, respectively. The leakage currents of the anodized films under a negative bias, which could not be suppressed by high-temperature annealing, were adequately suppressed by nitrogen addition, especially in anodized aluminum-gadolinium alloy. The current leakage of the anodized aluminum-gadolinium alloy with 6.0 at.% nitrogen content became -8E-13 A at -10 V and 150°C. This value is nearly equal to that of chemical-vapor-deposited (CVD) films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 500: Symposium EE – Electrically Based Microstructural Characterization II , 1997 , 119
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tsukada, T., MRS Symposium Proceedings vol. 284, 371–382 (1993).Google Scholar
2. Kim, C. W., Lee, J. H., Nam, H. R., Kim, S. Y., Jeong, C. O., Choi, J. H., Hong, M. P., Byun, H. S., Yang, H. G., Souk, J. H., Proceedings of Euro Display '96 SID, 591–594 (1996).Google Scholar
3. Arai, T., Hiromasu, Y., and Tsuji, S., Mat. Res. Soc. Symp. Proc. vol. 424, 37–42 (1996).Google Scholar
4. Yeh, C. F., Cheng, J. Y., and Lu, J. H., Jpn. J. Appl. Phys., vol. 32, 2803–2808 (1993).Google Scholar
5. Ozawa, K., Miyazaki, K., and Majima, T., J. Electrochem. Soc. vol. 141 no. 5, 1325–1333 (1994).Google Scholar
6. Arai, T. and Iiyori, H., European Materials Research Society 1997 Spring Meeting, Epitaxial Thin Film Growth and Nanostructures (to be published in 1997).Google Scholar
7. Takayama, S. and Tsutsui, N., J. Vac. Sci. Technol. A 14 (4), 2499–2504 (Jul/Aug 1996).Google Scholar
8. Onishi, T., Iwamura, E., Takagi, K., and Yoshikawa, K., J. Vac. Sci. Technol. A 14(5), p. 2728 (1996).Google Scholar
9. Chou, N. J., J. Electrochem. Soc. vol. 118 no. 4, 601–609 (April 1971).Google Scholar