Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-05-09T04:56:11.231Z Has data issue: false hasContentIssue false
  • English
  • Français

Amorphous Silicon Thin Film Transistors on Kapton Fibers

Published online by Cambridge University Press:  11 February 2011

Eitan Bonderover ,
Sigurd Wagner  and
Zhigang Suo
Eitan Bonderover
Affiliation:
Department of Electrical Engineering, Princeton University, Princeton, NJ 08544, U.S.A.
Sigurd Wagner
Affiliation:
Department of Electrical Engineering, Princeton University, Princeton, NJ 08544, U.S.A.
Zhigang Suo
Affiliation:
Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544, U.S.A.
Get access

Abstract

The textile industry uses weaving to create very large quantities of fabric very quickly. The goal of our research is to use this well established technology to create complex large-area circuits quickly and efficiently. In our laboratory we have previously shown that amorphous silicon (a-Si) can be used to make thin-Film transistors (TFTs) on Kapton (a highly temperature-resistant polyimide from DuPont). We also previously showed that these TFTs can survive mechanical loads. A process has been designed to make “TFT fibers” by fabricating a-Si TFTs on Kapton. A special TFT geometry has also been developed. The structure consists of 3 large gold contact pads – one for each terminal of the TFT – running along the fiber. These contact pads allow connections to be made between TFT fibers using conductor fibers – Kapton fibers coated only with gold. The TFT fabrication process is based on a low temperature (150°C) Plasma Enhanced Chemical Vapor Deposition (PECVD) process. The TFTs are fabricated on a Kapton sheet from which flat fibers are made by the slit film technique. So far the best method for cutting a Kapton sheet into fibers has been plasma etching. We will describe the electronic characteristics of these TFTs as well as the electrical characteristics of the contacts between TFT fibers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 736: Symposium D – Electronics on Unconventional Substrates–Electrotextiles and Giant-Area Flexible Circuits , 2002 , D2.5
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

http://www.research.ibm.com/journal/sj/393/part3/post.html.Google Scholar
http://www.elektex.com.Google Scholar
[3] http://www.ifmachines.com.Google Scholar
[4] http://www.sensatex.com.Google Scholar
[5] http://www.dupont.com/kapton/general/caustic-etching.html.Google Scholar
[6] Adanur, S, Wellington sears handbook of industrial textiles, Technomic Publishing Company, Lancaster PA, 1995, Figure 4.1 on p. 88.Google Scholar
[7] Gleskova, Helena and Wagner, Sigurd, Amorphous silicon thin-film transistors on compliant ployimide foil substrates, IEEE Electron Device Letters 20 (1999), no. 9, 473–475.Google Scholar
[8] Gleskova, Helena, Wagner, Sigurd, Gašpárik, V, and Kováč, P, 150°C amorphous silicon thin-film transistor technology for polyimide substrates, Journal of The Electrochemical Society 148 (2001), no. 7, G370–G374.Google Scholar
[9] Gleskova, Helena, Wagner, Sigurd, Soboyejo, Wolé, and Suo, Zhigang, Effects of mechanical strain on amorphous silicon thin-film transistors, Material Resource Society Symposium Proceedings, vol. 715, 2002, pp. 667–677.Google Scholar