Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-26T19:30:50.600Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Observations of Pre-Patterned Void Interactions Under Electromigration-Induced Stress

Published online by Cambridge University Press:  15 February 2011

Richard Frankovic  and
Gary H. Bernstein
Richard Frankovic
Affiliation:
Department of Electrical Engineering, University of Notre Dame, Notre Dame, IN 46556
Gary H. Bernstein
Affiliation:
Department of Electrical Engineering, University of Notre Dame, Notre Dame, IN 46556
Get access

Abstract

Electromigration (EM) void nucleation and growth is a failure mechanism of integrated circuit (IC) metallization. The time-to-failure of interconnect lines depends on the void nucleation time and the void growth time. The current understanding of the void growth stage is minimal, and characterization of the void growth stage is essential to further explain EM performance of IC metal interconnections. This work used high-resolution electron-beam lithography to define small dimension edge-voids into gold lines at various separation distances from each other, on the same side or opposite sides of the lines. The EM-induced interaction behavior of pre-defined voids was measured in a FESEM in-situ. Results showed that for small separation distances, void-void interaction enabled shape changes in the pre-patterned voids. For larger separation distance, void-void interactions could be characterized by secondary, induced void and hillock area measurements. As the separation distance increased, the void-void interaction diminished, and the voids acted independently of each other.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 428: Symposium L – Materials Reliability in Microelectronics VI , 1996 , 101
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Thomas, R. W. and Calabrese, D. W., Proc. 21st. Ann. Rel. Phys. Symp., 1, (IEEE, New York, 1983).Google Scholar
2. Levine, E. and Kitcher, J., Proc. 22nd. Ann. Rel. Phys. Symp., 242, (IEEE, New York, 1984).Google Scholar
3. Besser, P. R., Madden, M. C. and Flinn, P., J. Appl. Phys., 72, 3792, (1992).Google Scholar
4. Frankovic, R. and Bernstein, G. H., in In-Situ Scanning and Tunneling Microscopy of Dynamic Processes, Material Research Society, Pittsburgh, in press.Google Scholar
5. Berenbaum, L., J. Appl. Phys., 42, 880, (1971).Google Scholar
6. Bazan, G. and Bernstein, G. H., J. Vac. Sci. Tech. A, 11, 1745, (1993).Google Scholar
7. Bernstein, G. H., Hill, D. A., and Liu, P., J. Appl. Phys., 71, 4066, (1992).Google Scholar
8. Wong, C. C., Smith, H. I., and Thompson, C. V., Appl. Phys. Lett., 48, 335, (1986).Google Scholar
9. Blair, J. C., Ghate, P. B., and Haywood, C. T., Appl. Phys. Lett., 17, 281 (1970).Google Scholar