4 results
Clay Minerals in Hydrothermally Altered Volcanic Rocks, Eastern Pontides, Turkey
- Muazzez Çelik, Necati Karakaya, Abidin Temel
-
- Journal:
- Clays and Clay Minerals / Volume 47 / Issue 6 / December 1999
- Published online by Cambridge University Press:
- 28 February 2024, pp. 708-717
-
- Article
- Export citation
-
Extensive hydrothermal alteration is observed around volcanogenic massive sulfide deposits. These deposits are related to Late Cretaceous volcanism in various parts of the Eastern Pontide province. Mineral assemblages resulting from alteration consist of mostly clay minerals and silica polymorphs, some sulfate minerals, and scarce zeolite minerals. The clay minerals are kaolinite, illite, and smectite. These minerals were examined using X-ray diffraction (XRD), scanning electron microscopy (SEM)-energy dispersive spectrometry (EDS), X-ray fluorescence spectroscopy (XRF), and differential thermal analysis (DTA)-thermal gravimetry (TG) techniques. The illite and the toseki deposits are a result of hydrothermal alteration of dacitic-andesitic volcanites. Two groups of bentonite deposits occur; the first mainly formed by hydrothermal solution whereas the second group resulted from halmyrolysis.
The smectite in these alteration zones is generally montmorillonitic in composition and the interlayer cation is mostly Ca and lesser amounts of Na. The SiO2 and Fe2O3 contents of the hydrothermal bentonites are higher than those of the halmyrolysis smectites; however, the MgO content of both groups is similar. The Na2O and K2O contents of both groups are generally <0.5%. The hydrothermal bentonites are not plastic and have open honeycomb microtextures, although the halmyrolitic smectites are plastic with ultrafine and rod-shaped textures. Illite, which contains some smectite layers, is a 1M polymorph, and has an asymmetry to the low-angle side of the XRD peaks. The impure illite deposits contain various combinations of smectite, kaolinite and gypsum, galena, sphalerite, pyrite, goetite, and quartz. The illite has >35 wt. % Al2O3. The toseki raw material, which may be possibly useful as a porcelain raw material, is composed mainly of illite, kaolinite and quartz, or illite and quartz. The crystallinity of the kaolinite is poor.
Mineralogical and Chemical Properties and the Origin of Two Types of Analcime in SW Ankara, Turkey
- Necati Karakaya, Muazzez Çelik Karakaya, Abidin Temel
-
- Journal:
- Clays and Clay Minerals / Volume 61 / Issue 3 / June 2013
- Published online by Cambridge University Press:
- 01 January 2024, pp. 231-257
-
- Article
- Export citation
-
Authigenic analcimes were observed in different amounts in Miocene units in central Anatolia, Turkey. Two types of analcime occurrences were defined: (1) as continuous but inhomogeneous concentrations varying from 3 to 75 wt.% in lacustrine sedimentary rocks; and (2) as low concentrations (between 3 and 20%) and discontinuous components in the tuffs and claystones intercalated with tuff. The type 2 analcimes have been investigated by many researchers while the origin and properties of the sedimentary analcimes, which are widespread in different parts of Turkey, have not been clarified. The present study focused on the genesis and the mineralogical and geochemical properties of both types of analcime. The analcimes were investigated using X-ray diffraction, optical microscopy, scanning electron microscopy, and chemical analytical methods. In the first type, other than volcaniclastic material, analcime is the only zeolite mineral. The first type of analcime was associated mainly with montmorillonite, dolomite, and feldspar and sometimes with calcite, and rarely with illite and kaolinite. The second type of analcime was found as an accessory mineral accompanied by montmorillonite, feldspar, and heulandite/clinoptilolite, and more rarely by erionite, kaolinite, and mica. The pyroclastic rocks are chemically classified into two subgroups, dacitic and andesitic rocks, with an intermediate to high silica content and a high percentage of alkali cations. Analcime in the pyroclastics intercalated with clay layers commonly replaced early-formed zeolites, such as clinoptilolite or volcanic materials. The first type of analcime was not formed from precursor zeolites and had a different origin than the second type. Type 1 analcime contains larger amounts of Si (34.19 to 34.68 Si per unit cell) and less Al and Na than in theoretical analcime. The theoretical structural formula of analcime is Na16(Al16Si32O96)H2O. The strongly decomposing feldspar and clay minerals (in particular montmorillonite and partially illite) of the older formations and the dissolution of halite and also soda minerals, e.g. thenardite and glauberite, allow the authigenic formation of type 1 analcime, dolomite, K-feldspar, and montmorillonite in a saline and highly alkaline environment such as the marginal part of Lake Tuzgölü. Type 2 analcime may have been precipitated directly from solution, pyroclastic material, or precursor zeolite minerals in saline and alkaline lake water.
Mineralogical and Geochemical Characteristics and Genesis of the Sepiolite Deposits at Polatli Basin (Ankara, Turkey)
- Muazzez Çelik Karakaya, Necati Karakaya, Abidin Temel
-
- Journal:
- Clays and Clay Minerals / Volume 59 / Issue 3 / June 2011
- Published online by Cambridge University Press:
- 01 January 2024, pp. 286-314
-
- Article
- Export citation
-
The Middle—Upper Miocene—Pliocene sediments near Polatlı contain commercial sepiolitic clay deposits. The sepiolite-rich Polatlı basin sediments were studied to describe the sepiolitic clay deposits of the area and to assess the environments of formation using X-ray diffraction, optical and scanning electron microscopy, and chemical analysis. The Polatlı basin is an elongated, rift-related graben trending NE—SW in central Turkey, filled with continental Late Miocene to Early Pliocene sediments. The sediments which comprise claystone, marl and limestone, dolostone, and evaporites are characteristic deposits of low-salinity, playa-lake depositional environments. These sepiolite-rich deposits include sepiolite, dolomite, and calcite, with minor amounts of palygorskite, quartz, moganite, amorphous silica (opal-CT), and feldspar.
The sepiolite shows all the characteristic X-ray diffraction reflections of that mineral, whereas amorphous silica containing sepiolite shows some of the characteristic reflections of sepiolite, but with somewhat broader and less intense basal reflections. In the siliceous deposits, the long, fibrous, and filamentous aggregates of the sepiolite were converted to thick, short fibers, low in Mg, and showing transition to amorphous silica.
Major and trace elements (e.g. Si, Al, Fe, Mg, Sr, Ba, etc.) were found almost exclusively in Mg-rich smectitic claystone and detrital silicate-rich rocks, whereas Mg, Ca, and some Si were concentrated in the neoformed minerals in the basin. The rare-earth elements (REE) and some of the high-field strength elements (HFSE), large ion lithophile elements (LILE), and transition elements (TRE) patterns were similar for detrital silicate-rich rocks and formed from neoformed mineral lithologies. The REE, TRE, LILE, and some of the HFSE contents of limestone, dolostone, and sepiolitic claystone were similar while those of detrital silicate-rich rocks and Mg-rich smectitic claystones were similar to each other. PAAS-normalized REE and other trace-element patterns were typically subparallel and depleted in neoformed minerals. All sample groups had positive Eu* anomalies, except Mg-rich smectite (0.80). Limestone, dolostone, and amorphous silica compounds showed slightly negative Ce* anomalies, whereas sepiolitic claystones, Mg-rich smectitic claystones, and detrital silicate-rich rocks had a slightly positive Ce* anomaly.
Petrogenetic modelling of Quaternary post-collisional volcanism: a case study of central and eastern Anatolia
- PINAR ALICI ŞEN, ABİDİN TEMEL, ALAIN GOURGAUD
-
- Journal:
- Geological Magazine / Volume 141 / Issue 1 / January 2004
- Published online by Cambridge University Press:
- 01 March 2004, pp. 81-98
-
- Article
- Export citation
-
Extensive continental collision-related volcanism occurred in Turkey during Neogene–Quaternary times. In central Anatolia, calc-alkaline to alkaline volcanism began in the Middle–Late Miocene. Here we report trace elemental and isotopic data from Quaternary age samples from central and eastern Anatolia. Most mafic lavas from central Anatolia are basalt and basaltic andesite, with lesser amounts of basaltic trachyandesite and andesite. All magma types exhibit enrichment in LILE (Sr, Rb, Ba and Pb) relative to HFSE (Nb, Ta). Trace element patterns are characteristic of continental margin volcanism with high Ba/Nb and Th/Nb ratios. 87Sr/86Sr and 143Nd/144Nd isotopic ratios of central Anatolian lavas range between 0.704105–0.705619 and 0.512604–0.512849, respectively. The Quaternary alkaline volcanism of eastern Anatolia has been closely linked to the collision between the Arabian and Eurasian plates. Karacadaǧ and Tendürek volcanic rocks are represented by alkali basalts and basaltic trachyandesites, respectively. As expected from their alkaline nature, they contain high abundances of LIL elements, but Tendürek lavas also show depletion in Nb and Ta, indicating the role of crustal contamination in the evolution of these magmas. 87Sr/86Sr and 143Nd/144Nd ratios of the Karacadaǧ and Tendürek lavas range from 0.703512 to 0.704466; 0.512742 to 0.512883 and 0.705743 to 0.705889 and 0.512676, respectively. Petrogenetic modelling has been used to constrain source characteristics for the central and eastern Anatolian volcanic rocks. Trace element ratio plots and REE modelling indicate that the central Anatolian volcanism was generated from a lithospheric mantle source that recorded the previous subduction events between Afro-Arabian and Eurasian plates during Eocene to Miocene times. In contrast, The Karacadaǧ alkaline basaltic volcanism on the Arabian foreland is derived from an OIB-like mantle source with limited crustal contamination. Tendürek volcanism, located on thickened crust, north of the Bitlis thrust zone, derived from the lithospheric mantle via small degrees (1.5 %) of partial melting.