Hostname: page-component-848d4c4894-ttngx Total loading time: 0 Render date: 2024-05-07T02:08:32.828Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of a Magnetic-Dielectric YIG@BaTiO3 Composite via Hydrothermal Processing

Published online by Cambridge University Press:  01 February 2011

Shin-Wei Lin ,
Wen-Song Ko  and
Mean-Jue Tung
Shin-Wei Lin
Affiliation:
shinweilin@itri.org.tw, Industrial Technology Research Institute, Material and Chemical Research Laboratories, Rm. 302, Bldg. 77, 195 Sec. 4, Chung Hsing Rd., Hsinchu, 310, Taiwan, 886-3-5820206
Wen-Song Ko
Affiliation:
wsko@itri.org.tw, Industrial Technology Research Institute, Material and Chemical Research Laboratories, Rm. 302, Bldg. 77, 195 Sec. 4, Chung Hsing Rd., Hsinchu, 310, Taiwan
Mean-Jue Tung
Affiliation:
MJTung@itri.org.tw, Industrial Technology Research Institute, Material and Chemical Research Laboratories, Rm. 302, Bldg. 77, 195 Sec. 4, Chung Hsing Rd., Hsinchu, 310, Taiwan
Get access

Abstract

YIG@BaTiO3 composite was synthesized by a sequential process involving the formation of TiO2 by sol-gel reaction and a subsequent hydrothermal transformation from TiO2 to BaTiO3. TiO2 layer was coated on YIG particle via sol-gel reaction which comprised hydrolysis and condensation reaction of titanium n-butoxide. The pH value of the solution was precisely controlled to ensure that YIG particles could be well dispersed in the solution and the concentrations of TBOT and H2O were adjusted to obtain variant thickness of TiO2 layer. Nano-sized BaTiO3 coating on YIG was achieved by a hydrothermal conversion of the TiO2 shell layer. BaTiO3 shell layer was synthesized in an autoclave at 240°C for 12 hours and the concentration ratio of [Ba]/[Ti] was 1.6. Phases and morphology of the composite are identified by X-ray diffraction and SEM, respectively. Magnetic properties of YIG@BaTiO3 composite were investigated by vibrating sample magnetometer. Coercivity of YIG@BaTiO3 composites with different composition were not affected but the saturated magnetization dropped down with increasing of the volume ratio of BaTiO3. Permittivity of YIG was raised by coating of BaTiO3 layer and was varied from 6 to 60 and 75 by tuning up the volume ratio of BaTiO3 in the composite. The mechanism of the formation of YIG@BaTiO3 composite was also discussed in the article.

Keywords

magneticdielectriccomposite
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 962: Symposium P – Nanoscale Magnets – Synthesis, Self-Assembly, Properties and Applications , 2006 , 0962-P10-20
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Collin, R.E., Foundations for Microwave Engineering, McGraw-Hill, New York, 2nd Edition, 1992, p. 450.Google Scholar
2. Taketomi, S., Sorensen, C.M. and Kabunde, K.J., J. Magn. Magn. Mater. 222, 54 (2000).Google Scholar
3. Gilleo, M.A., Ferromagnetic Materials: A Handbook of the Properties of Magnetically Ordered Substances, Wohlfarth, E.P., (Ed.), North-Holland, Amsterdam, Vol.2, 1980 (Chapter 1).Google Scholar
4. Stockenhuber, M., Mayer, H. and Lercher, J. A., J. Am. Ceram. Soc. 76(5), 1185–1190 (1993).Google Scholar
5. Kim, S., Lee, M., Noh, T. and Lee, C., J. Mater. Sci. 31, 3643–3648 (1996).Google Scholar
6. Li, S., Eastman, J. A., Thompson, L. J., Bjormander, C. and Foster, C. M., Mater. Res. Soc. Symp. Proc. 457, 45–50 (1997).Google Scholar
7. Frey, M. H. and Payne, D. A., Chem. Mater. 7, 123–129 (1995).Google Scholar
8. Kerchner, J. A., Moon, J., Chodelka, R.E., Morrone, A. A. and Adair, J. H., ACS Symp. Ser. 681, 106–119 (1998).Google Scholar
9. Christensen, A. N., Acta Chem. Scand. 24(7), 2447–2452 (1970).Google Scholar
10. Chien, A. T., Speck, J. S., Lange, F. F., Daykin, A. C. and Levi, C. G., J. Mater. Res. 10(7), 1784–1789 (1995).Google Scholar
11. Gopal, M., Chan, W. J. Moberly and De Jonghe, L. C., J. Mater. Sci. 32, 6001–6008 (1997).Google Scholar
12. Moon, J., Suvaci, E., Li, T., Costantino, S. A. and Adair, J. H., J. Eur. Ceram. Soc. 22, 809–815 (2002).Google Scholar
13. Xu, H. and Gao, L., Mater. Lett. 58, 1582–1586 (2004).Google Scholar