Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-10-31T23:09:29.019Z Has data issue: false hasContentIssue false

Novel Continuous Poly(vinylidene fluoride) Nanofibers

Published online by Cambridge University Press:  01 February 2011

Xi Ren
Affiliation:
ydzenis@unl.edu, University of Nebraska-Lincoln, Engineering Mechanics, W315 Nebraska Hall, University of Nebraska-Lincoln, Lincoln, NE, 68588-0526, United States, (402) 472-0713
Yuris Dzenis
Affiliation:
ydzenis@unl.edu, University of Nebraska-Lincoln, Engineering Mechanics, W315 Nebraska Hall, University of Nebraska-Lincoln, Lincoln, NE, 68588-0526, United States
Get access

Abstract

Poly(vinylidene fluoride) (PVDF) is well known for its ferroelectric and piezoelectric properties. Currently, this polymer is used in applications in the form of films. PVDF fibers are expected to open up exciting new opportunities such as design and use of active textiles and composites. It is well-known that synthetic fiber properties improve substantially with the decrease of their diameter. However, conventional mechanical fiber spinning processes usually produce fibers with diameters in the range from tens to hundreds of microns. In this work, ultrafine, submicron-diameter continuous PVDF nanofibers were fabricated by electrospinning method. The method consists of spinning polymer solutions in high electric fields. Effects of process parameters on nanofiber diameter and morphology were studied. XRD and FTIR analyses of PVDF nanofibers were performed. The latter indicated that the initial á phase of the raw material was converted to â phase PVDF during electrospinning. As â phase is primarily responsible for the piezo- and ferroelectric properties of PVDF, the latter result is very encouraging. The demonstrated novel continuous PVDF nanofibers can be used in nanostructured active textiles and composites and can lead to unusual new designs for actuators and sensors.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tashiro, K., in Ferroelectric Polymers, edited by Nalwa, H. S. (Marcel Dekker, New York, 1995), p.63.Google Scholar
2. Seo, I. and Zou, D., in Ferroelectric Polymers, edited by Nalwa, H. S. (Marcel Dekker, New York, 1995), p. 699.Google Scholar
3. Bune, A.V., Fridkin, V. M. and Ducharme, S. et al., Nature, 391, 874 (1998).Google Scholar
4. Bai, M. and Ducharme, S., Appl. Phys. Lett. 85, 3528 (2004).Google Scholar
5. Zhao, X. Z., Bharti, V., and Zhang, Q. M., Appl. Phys. Lett. 73, 2054 (1998).Google Scholar
6. Dzenis, Y.A., Science 304, 1917 (2004).Google Scholar
7. Reneker, D. H. and Chun, I., Nanotechnology, 7, 216 (1996).Google Scholar
8. Spivak, A. F. and Dzenis, Y.A., Appl. Phys. Lett. 73, 3067 (1998).Google Scholar
9. Seoul, C., Kim, Y.T. and Baek, C.K., J. Polym. Sci. B–41, 1572 (2003)Google Scholar
10. Gupta, P. and Wilkes, G.L., Polymer, 44, 6353 (2003).Google Scholar
11. Fong, H., Chun, I., Reneker, D.H., Polymer, 40, 4585 (1999).Google Scholar
12. Hattori, T., Hikosaka, M. and Ohigashi, H., Polymer 37, 85 (1996).Google Scholar
13. Benz, M. and Euler, W. B., J. Appl. Polym. Sci. 89, 1093 (2003).Google Scholar