Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-30T04:49:30.229Z Has data issue: false hasContentIssue false
  • English
  • Français

A Metallographic Study of Certain Pre-Columbian American Implements*

Published online by Cambridge University Press:  25 January 2017

Leonard Frank  and
David J. Mack
Leonard Frank
Affiliation:
College of Mining and Metallurgy, University of Wisconsin, Madison, Wisconsin
David J. Mack
Affiliation:
University of Wisconsin, Madison, Wisconsin
Get access Rights & Permissions [Opens in a new window]

Extract

A metallographic study was made of certain large native copper implements to determine the methods of manufacture. Metallurgical knowledge of the diffusion of oxygen into copper, the recrystallization of copper, and the working characteristics of copper are used in this analysis. The artifacts analyzed are listed below. The Wisconsin Historical Museum catalog numbers of each specimen is also given.

Type
Facts and Comments
Information
American Antiquity , Volume 17 , Issue 1Part1 , July 1951 , pp. 57 - 60
Copyright
Copyright © The Society for American Archaeology 1951

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

The author wishes to thank Miss Suzanne W. Miles, former curator of archaeology and ethnology, Wisconsin Historical Museum, for suggesting the subject of this paper, and also to express appreciation for the loan of the artifacts from the Wisconsin State Historical Society. Grateful acknowledgments are due to Professor David Mack of the Department of Metallurgy of the University of Wisconsin, for much valuable advice and assistance given, and to the Metallurgy Department for the use of facilities.

References

Barrett, Charles S. 1943. Structure of Metals, pp. 288, 307, 420. New York and London.Google Scholar
Doan, Gilbert E., and M. Mahla, Elbert 1941. The Principles of Physical Metallurgy, pp. 84–107. New York and London.Google Scholar
Jefferies, A. and Archer, R. S. 1924. The Science of Metals, pp. 85–144. New York and London.Google Scholar
Lyman, Taylor, ed. 1948. Metals Handbook, American Society for Metals, pp. 843–909. Cleveland.Google Scholar
Mathewson, C. H. 1928. Twinning in Metals. Proceedings of the Institute of Metals Division, American Institute of Mining and Metallurgical Engineers, pp. 36–46. New York.Google Scholar
Meyer, C. L., and Elliott, V. E. June 1948. A Method of Determining the Origin of Surface Defects on Rolled Steel Products. Metals Technology, American Institute of Mining and Metallurgical Engineers. Vol. 15, No. 4, Technical Publications No. 2368. New York.Google Scholar
Northcott, L. 1946. The Influence of Macrostructure upon Segregation, and Dendritic Structures of Columnar Crystals. Journal of the Institute of Metals, Vol. 72, Paper 1010, pp. 31–50, Paper 1020, pp. 283–91. London.Google Scholar
Phillips, George B. 1925. The Primitive Copper Industry of America, Part I. Journal of the Institute of Metals, Vol. 34, No. 2, pp. 261–70. London.Google Scholar
Phillips, George B. 1926. The Primitive Copper Industry of America, Part II. Journal of the Institute of Metals, Vol. 36, No. 2, pp. 99–106. London.Google Scholar
Rhines, Frederick N. 1940. A Metallographic Study of Internal Oxidation in the Alpha Solid Solutions of Copper. Metals Technology, American Institute of Mining and Metallurgical Engineers, Vol. 7, No. 2, Technical Publication, No. 1162. New York.Google Scholar
Seitz, F. 1943. The Physics of Metals, pp. 56, 102, 435. New York and London.Google Scholar
Van Wert, G. 1932. Introduction to Physical Metallurgy, pp. 210–15. New York and London.Google Scholar