Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-05-31T11:50:36.834Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of in situ Transmission Electron Microscopyfor Tribological Investigations of Magnetron Sputter Assisted Pulsed Laser Deposition of Yttria-stabilized Zirconia-gold Composite Coatings

Published online by Cambridge University Press:  01 July 2005

J.J. Hu ,
A.A. Voevodin  and
J.S. Zabinski
J.J. Hu*
Affiliation:
Materials and Manufacturing Directorate, Air Force Research Laboratory (AFRL / MLBT), Wright-Patterson Air Force Base, Dayton, Ohio 45433-7750
A.A. Voevodin
Affiliation:
Materials and Manufacturing Directorate, Air Force Research Laboratory (AFRL / MLBT), Wright-Patterson Air Force Base, Dayton, Ohio 45433-7750
J.S. Zabinski
Affiliation:
Materials and Manufacturing Directorate, Air Force Research Laboratory (AFRL / MLBT), Wright-Patterson Air Force Base, Dayton, Ohio 45433-7750
*
a)Address all correspondence to this author. e-mail: jianjun.hu@wpafb.af.mil
Get access

Abstract

Yttria-stabilized zirconia (YSZ)-Au composite coatings have great potential as solid film lubricants for aerospace applications over a wide range of environmental conditions. They were grown on steel disks or silicon wafers by pulsed laser ablation of YSZ and simultaneous magnetron sputtering of a Au target. Such a combination of ceramics with soft metals improved the toughness of the composite coating and increased its ability to lubricate at high temperature. Information on the time-dependent response of these microstructures to changes in temperature is essential to tribological investigations of high temperature performance. In situ transmission electron microscopy was used to directly measure the dynamic change of YSZ-Au coating structure at elevated temperatures. High-resolution electron microscopy and electron diffraction showed that amorphous YSZ-5 at.% Au coatings proceeded to crystallize under the irradiation of electron beams. Time varying x-ray energy dispersive spectra measured a loss of oxygen in the sample during about 10 min of irradiation with subsequent slight oxygen recovery. This behavior was related to the activation of oxygen diffusion under electron irradiation. X-ray diffraction patterns from vacuum annealed samples verified crystallization of the coatings at 500 °C. Real-time growth of Au nanograins in the sample was observed as the temperature was increased to 500 °C in a TEM specimen holder that could be heated. The grain growth process was recorded using a charge-coupled device camera installed on the transmission electron microscope. The crystallization and growth of zirconia and Au nanograins resulted in low friction during tribological tests. The nucleation of Au islands on heated ball-on-flat specimens was responsible for lowering friction.

Keywords

Pulsed laser deposition (PLD)Transmission electron microscopy (TEM)Tribology
Type
Articles
Information
Journal of Materials Research , Volume 20 , Issue 7 , July 2005 , pp. 1860 - 1868
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Voevodin, A.A., Hu, J.J., Fitz, T.A. and Zabinski, J.S.: Tribological properties of adaptive nanocomposite coatings made of yttria stabilized zirconia and gold. Surf. Coat. Technol. 146–147, 351 (2001).CrossRefGoogle Scholar
2Voevodin, A.A., Hu, J.J., Jones, J.G., Fitz, T.A. and Zabinski, J.S.: Growth and structural characterization of yttria-stabilized zirconiagold nanocomposite films with improved toughness. Thin Solid Films 401, 187 (2001).CrossRefGoogle Scholar
3Voevodin, A.A., Fitz, T.A., Hu, J.J. and Zabinski, J.S.: Nanocomposite tribological coatings with “chameleon” surface adaptations. J. Vac. Sci. Technol. A 20, 1434 (2002).CrossRefGoogle Scholar
4Chiang, Y-M., Birnie, D. III, and Kingery, W.D., Physical Ceramics (Wiley, New York, 1997), pp. 29, 59, 458.Google Scholar
5Wachtman, J.B.: Mechanical Properties of Ceramics (Wiley, New York, 1996), pp. 161, 392.Google Scholar
6Fischer, T.E., Anderson, M.P., Jahanmir, S. and Salher, R.: Friction and wear of tough and brittle zirconia in nitrogen, air, water, hexadecane and hexadecane containing stearic acid. Wear 124, 133 (1988).CrossRefGoogle Scholar
7Stachowiak, G.W. and Stachowiak, G.B.: Unlubricated friction and wear behaviour of toughened zirconia ceramics. Wear 132, 151 (1989).CrossRefGoogle Scholar
8Stachowiak, G.W. and Stachowiak, G.B.: Unlubricated wear and friction of toughened zirconia ceramics at elevated temperatures. Wear 143, 277 (1991).CrossRefGoogle Scholar
9Carter, G.M., Hooper, R.M., Henshall, J.L. and Guillou, M.O.: Friction of metal sliders on toughened zirconia ceramic between 298 and 973 K. Wear 148, 147 (1991).CrossRefGoogle Scholar
10Lee, S.W., Hsu, S.M. and Shen, M.C.: Ceramic wear maps– zirconia. J. Am. Ceram. Soc. 76, 1937 (1993).CrossRefGoogle Scholar
11Tucci, A. and Esposito, L.: Microstructure and tribological properties of ZrO2 ceramics. Wear 172, 111 (1994).CrossRefGoogle Scholar
12Fischer, T.E., Anderson, M.P. and Jahanmir, S.: Influence of fracture-toughness on the wear-resistance of yttria-doped zirconium-oxide. J. Am. Ceram. Soc. 72, 252 (1989).CrossRefGoogle Scholar
13Fusaro, R.: Lubrication of space systems. Lubrication Eng. 51, 182 (1995).Google Scholar
14Spalvins, T.: A review of recent advances in solid film lubrication. J. Vac. Sci. Technol. A. 5, 212 (1987).CrossRefGoogle Scholar
15Spalvins, T.: Coatings for wear and lubrication. Thin Solid Films 53, 285 (1978).CrossRefGoogle Scholar
16Butler, E.P. and Hale, K.F. Dynamic experiments in the electron microscope, in Practical Methods in Electron Microscopy, Vol. 9, edited by Glauert, A.M. (Elsevier, Amsterdam, The Netherlands, 1981).Google Scholar
17Ruhle, M., Phillipp, F., Seeger, A., and Heydenreich, J., Ultramicroscopy. 56, 1 (1994).CrossRefGoogle Scholar
18Hu, J.J., Voevodin, A.A. and Zabinski, J.S.: Characterization of magnetron sputtering and pulsed laser deposited ZrO2-Au composite films using TEM and EDS, Microsc. Microanal. 7(Suppl. 2), 1232 (2001).CrossRefGoogle Scholar
19Voevodin, A.A., Capano, M.A., Safriet, A.J., Donley, M.S. and Zabinski, J.S.: Combined magnetron sputtering and pulsed laser deposition of carbides and diamond-like carbon films. Appl. Phys. Lett. 69, 188 (1996).CrossRefGoogle Scholar
20Voevodin, A.A., Jones, J.G. and Zabinski, J.S.: Structural modification of single-axis-oriented yttria-stabilized-zirconia films under zirconium ion bombardment. Appl. Phys. Lett. 78, 730 (2001).CrossRefGoogle Scholar
21Voevodin, A.A., Jones, J.G. and Zabinski, J.S.: Structure control of pulsed laser deposited ZrO2/Y2O3 films. J. Vac. Sci. Technol. A 19, 1320 (2001).CrossRefGoogle Scholar
22Voevodin, A.A., Jones, J.G., and Zabinski, J.S.: Laser ablation, low temperature fabricated yttria-stabilized zirconia oriented films. U.S. Patent No. 6 509 070, January 21, 2003.Google Scholar
23 PDF Card#17-0923. JCPDS Powder Diffraction File (International Center for Powder Diffraction Data, Swarthmore, PA, 1998).Google Scholar
24 PDF Card#04-0784. JCPDS Powder Diffraction File (International Center for Powder Diffraction Data, Swarthmore, PA, 1998).Google Scholar
25Molodetsky, I., Navrotsky, A., Paskowitz, M.J., Leppert, V.J. and Risbud, S.H.: Energetics of x-ray-amorphous zirconia and the role of surface energy in its formation. J. Non-Cryst. Solids 262, 106 (2000).CrossRefGoogle Scholar
26Xie, S., Iglesia, E. and Bell, A.T.: Water-assisted tetragonalto-monoclinic phase transformation of ZrO2 at low temperatures. Chem. Mater. 12, 2442 (2000).CrossRefGoogle Scholar