Skip to main content
×
Home
    • Aa
    • Aa

Experimental determination of the fracture toughness via microscratch tests: Application to polymers, ceramics, and metals

  • Ange-Therese Akono (a1), Nicholas X. Randall (a2) and Franz-Josef Ulm (a3)
Abstract
Abstract

This article presents a novel microscratch technique for the determination of the fracture toughness of materials from scratch data. While acoustic emission and optical imaging devices provide quantitative evidence of fracture processes during scratch tests, the technique proposed here provides a quantitative means to assess the fracture toughness from the recorded forces and depth of penetration. We apply the proposed method to a large range of materials, from soft (polymers) to hard (metal), spanning fracture toughness values over more than two orders of magnitude. The fracture toughness values so obtained are in excellent agreement with toughness values obtained for the same materials by conventional fracture tests. The fact that the proposed microscratch technique is highly reproducible, almost nondestructive, and requires only small material volumes makes this technique a powerful tool for the assessment of fracture properties for microscale materials science and engineering applications.

Copyright
Corresponding author
a)Address all correspondence to this author. e-mail: ulm@mit.edu
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

1.C. Anunmana , K.J. Anusavice , and J.J. Mecholsky Jr.: Residual stress in glass: Indentation crack and fractography approaches. Dent. Mater. 25, 1453 (2009).

3.G.D. Quinn and R.C. Bradt : On the Vickers indentation fracture toughness test. J. Am. Ceram. Soc. 90, 673 (2007).

4.S. Widjaja , T.H. Yip , and A.M. Limarga : Measurement of creep-induced localized residual stress in soda-lime glass using nano-indentation technique. Mater. Sci. Eng., A 318, 211 (2001).

6.H. Ollendorf and D. Schneider : A comparative study of adhesion test methods for hard coatings. Surf. Coat. Technol. 113, 86 (1999).

7.F. Wredenberg and P.L. Larsson : Scratch testing of metals and polymers: Experiments and numerics. Wear 266, 76 (2009).

10.G.I. Barenblatt : The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7, 55 (1962).

11.A-T. Akono , P.M. Reis , and F-J. Ulm : Scratching as a fracture process: From butter to steel. Phys. Rev. Lett. 106, 204302 (2011).

12.A-T. Akono and F-J. Ulm : Fracture scaling relations for scratch tests of axisymmetric shape. J. Mech. Phys. Solids (2012). In press.

13.M. Miller , C. Bobko , M. Vandamme , and F-J. Ulm : Surface roughness criteria for cement paste nanoindentation. Cem. Concr. Res. 38, 467 (2008).

14.N.X. Randall , G. Favaro , and C.H. Frankel : The effect of intrinsic parameters on the critical load as measured with the scratch test method. Surf. Coat. Technol. 137, 146 (2001).

15.B.J. Briscoe , L. Fiori , and E. Pelillo : Nano-indentation of polymeric surfaces. J. Phys. D: Appl. Phys. 31, 2395 (1998).

16.M.R. VanLandingham , T.F. Juliano , and M.J. Hagon : Measuring tip shape for instrumented indentation using atomic force microscopy. Meas. Sci. Technol. 16, 2173 (2005).

17.R.W. Hertzberg , M.D. Skibo , and J.A. Manson : Fatigue crack propagation in polyacetal. J. Mater. Sci. 13, 1038 (1978).

18.A.J. Hill and C.M. Agrawal : Positron lifetime spectroscopy characterization of thermal history effects on polycarbonate. J. Mater. Sci. 25, 5036 (1990).

21.A-T. Akono and F-J. Ulm : Scratch test model for the determination of fracture toughness. Eng. Fract. Mech. 78, 334 (2011).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: