Hostname: page-component-848d4c4894-hfldf Total loading time: 0 Render date: 2024-05-17T16:52:51.962Z Has data issue: false hasContentIssue false
  • English
  • Français

Laser-induced microstructural changes and decomposition of aluminum nitride

Published online by Cambridge University Press:  03 March 2011

Siqi Cao ,
A.J. Pedraza  and
L.F. Allard
Siqi Cao
Affiliation:
Department of Materials Science and Engineering, University of Tennessee, Knoxville, Tennessee 37996-2200
A.J. Pedraza
Affiliation:
Department of Materials Science and Engineering, University of Tennessee, Knoxville, Tennessee 37996-2200
L.F. Allard
Affiliation:
High Temperature Materials Laboratory, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6064
Get access

Abstract

The microstructural changes induced by pulsed laser irradiation in the surface layer of AlN and the initial stage of electroless copper deposition in laser processe specimens have been investigated using transmission electron microscopy (TEM). It was found that a dislocation microstructure is generated by laser processing at laser energy densities of 1.5 J/cm2 or higher. A very sharp change in the dislocation microstructure was seen at a depth of 0.2 to 0.3 μm from the free surface. The dislocation Burgers vector is 〈100〉 and the slip plane is {001}, in agreement with previous reports. AlN was melted and resolidified homo-epitactically from the solid substrate forming a mosaic microstructure with very fine cells having a misorientation of up to 15°. Patches of metallic aluminum were found at the surface of all the specimens irradiated at a laser energy density of 1.5 J/cm2 or higher. Very fine particles of AlN, 20 to 50 nm in diameter, were randomly distributed inside the patches. Immersion of these specimens in an electroless copper bath showed that the electroless solution preferentially etched away aluminum at the Al-AlN interface. At the same time copper islands were deposited in cavities left by AlN particles as well as at the interface with the underlying substrate. These regions are the seeds for further electroless deposition. The TEM observations of laser-induced microstructural changes reported in this paper help to unravel further the mechanisms of adhesion enhancement and surface activation by pulsed laser irradiation.

Type
Articles
Information
Journal of Materials Research , Volume 10 , Issue 1 , January 1995 , pp. 54 - 62
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Lowndes, D. H., DeSilva, M., Godbole, M. J., Pedraza, A. J., and Geohegan, D. B., in Laser Ablation in Materials Processing: Fundamentals and Applications, edited by Braren, B., Dubowski, J. J., and Norton, D. P. (Mater. Res. Soc. Symp. Proc. 285, Pittsburgh, PA, 1993), p. 191.Google Scholar
2Esrom, H., in Chemical Perspectives of Microelectronic Materials II, edited by Interrante, L. V., Jensen, K. F., Dubois, L. H., and Gross, M. E. (Mater. Res. Soc. Symp. Proc. 204, Pittsburgh, PA, 1991), p. 457.Google Scholar
3Esrom, H., Zhang, J-Y., and Pedraza, A.J., in Photons and Low Energy Particles in Surface Processing, edited by Ashby, C. I. H., Brannon, J. H., and Pang, S. W. (Mater. Res. Soc. Symp. Proc. 236, Pittsburgh, PA, 1992), p. 383.Google Scholar
4Pedraza, A. J., in Proc. Int. Conf. on Beam Processing of Advanced Materials, edited by Singh, J. and Copley, S.M. (The Mineral, Metals, and Materials Society, Warrendale, PA, 1993), p. 63.Google Scholar
5DeSilva, M. J., Pedraza, A. J., and Lowndes, D. H., J. Mater. Res. 9, 1019 (1994).CrossRefGoogle Scholar
6Hagege, S., Ishida, Y., and Tanaka, S., J. Phys. C3, 189 (1988).Google Scholar
7Delavignette, P., Kirkpatrick, H. B., and Amelinckx, S., J. Appl.Phys. 32, 1098 (1961).CrossRefGoogle Scholar
8Pedraza, A. J., Zhang, J-Y., and Esrom, H., in Laser Ablation in Materials Processing: Fundamentals and Applications, edited by Braren, B., Dubowski, J. J., and Norton, D. P. (Mater. Res. Soc. Symp. Proc. 285, Pittsburgh, PA, 1993), p. 209.Google Scholar
9DeSilva, M.J., private communication.Google Scholar
10Lowndes, D. H. and Jellison, G. E. Jr., in Semiconductors and Semimetals, edited by Willardson, R. K. and Beer, A. C. (Academic Press, New York, 1984), Vol. 23, p. 314.Google Scholar
11Webb, R. L., Jensen, L. C., Langford, S. C., and Dickinson, J. T., J. Appl. Phys. 74, 2323 (1993).CrossRefGoogle Scholar
12Webb, R. L., Jensen, L. C., Langford, S. C., and Dickinson, J. T., J. Appl. Phys. 74, 2340 (1993).Google Scholar
13Lowndes, D. H., DeSilva, M., Godbole, M. J., Pedraza, A. J., Thundat, T., and Warmack, R. J., Appl. Phys. Lett. 64, 1791 (1994).CrossRefGoogle Scholar
14Godbole, M. J., Pedraza, A. J., Lowndes, D. H., and Kenik, E. A., J. Mater. Res. 4, 1202 (1989).CrossRefGoogle Scholar
15Taylor, K. M. and Lenie, C., J. Electrochem. Soc. 107, 308 (1960).CrossRefGoogle Scholar
16Osaka, T., Asada, T., Nakajima, E., and Koiwa, I., J. Electrochem. Soc. 135, 2578 (1988).CrossRefGoogle Scholar
17DeSilva, M.J., Pedraza, A. J., Lowndes, D. H., and Godbole, M. J., in Electronic Packaging Materials Science VII, edited by Pollak, R. A., Borgesen, P., Yamada, H., and Jensen, K. F. (Mater. Res. Soc. Symp. Proc. 323, Pittsburgh, PA, 1994), p. 97.Google Scholar
18Etkina, L. I., Shepelin, V. A., Kasatkin, E. V., and Alfimov, V. I., Elektrokhimiya 22, 1371 (1986).Google Scholar
19Turner, R. M. and Whitworth, R. W., Philos. Mag. 18, 531 (1968).CrossRefGoogle Scholar
20Petrenko, V. F. and Whitworth, R. W., Philos. Mag. 41A, 681 (1980).CrossRefGoogle Scholar
21Pauling, L., in The Nature of the Chemical Bond, 3rd ed. (Cornell University Press, Cornell, NY, 1960), p. 98.Google Scholar
22Hirth, J. P. and Lothe, J., in Theory of Dislocations, 2nd ed. (John Wiley & Sons, New York, 1982), p. 398.Google Scholar