Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-15T01:59:32.023Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanically induced solid-state reaction for synthesizing glassy Co75Ti25 soft magnet alloy powders with a wide supercooled liquid region

Published online by Cambridge University Press:  31 January 2011

M. Sherif El-Eskandarany ,
Wei Zhang  and
A. Inoue
M. Sherif El-Eskandarany
Affiliation:
Inoue Superliquid Glass Project, ERATO, JST, Yagiyama-minami, 2–1–1, Sendai 982–0807, Japan
Wei Zhang
Affiliation:
Inoue Superliquid Glass Project, ERATO, JST, Yagiyama-minami, 2–1–1, Sendai 982–0807, Japan
A. Inoue
Affiliation:
Institute for Materials Research, Tohoku University, Katahira 2–1–1, Sendai 980–8577, Japan
Get access

Abstract

A single phase of glassy Co75Ti25 alloy powders was synthesized by high-energy ball milling the elemental powders at room temperature, using the mechanical alloying method. The final product of the glassy alloy, which is obtained after ball milling for 86 ks, exhibits soft magnetic properties with polarization and coercivity values of 0.67 T and 2.98 kA/m, respectively. This binary glassy alloy, in which its glass transition temperature (Tg) lies at a rather high temperature (833 K), transforms into face-centered-cubic Co3Ti (ordered phase) at 889 K through a single sharp exothermic reaction with an enthalpy change of crystallization (ΔHx) of −2.35 kJ/mol. The supercooled liquid region before crystallization ΔTx of the synthesized glassy powders shows an extraordinary high value (56 K) for a metallic binary system. The reduced glass transition temperature [ratio between Tg and liquidus temperatures, Tl (Tg/Tl)] was 0.56. We also demonstrated postannealing experiments of the mechanically deformed Co/Ti multilayered composite powders. The results show that annealing of the powders at 710 K leads to the formation of a glassy phase (thermally enhanced glass formation reaction). Its heat formation was measured directly and found to be −0.56 kJ/mol. The similarity in the crystallization and magnetization behaviors between the two classes of as-annealed and as-mechanically alloyed glassy powders implies the formation of the same glassy phase.

Type
Articles
Information
Journal of Materials Research , Volume 17 , Issue 9 , September 2002 , pp. 2447 - 2456
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Koch, C.C., Cavin, O.B., McKamey, C.G., and Scarbrough, J.O., Appl. Phys. Lett. 43, 1017 (1983).CrossRefGoogle Scholar
2.El-Eskandarany, M. Sherif, Aoki, K., and Suzuki, K., J. Less-Common Met. 167, 113 (1990).CrossRefGoogle Scholar
3.El-Eskandarany, M. Sherif, Sumiyama, K., Aoki, K., and Suzuki, K., J. Mater. Res. 7, 888 (1992).CrossRefGoogle Scholar
4.El-Eskandarany, M. Sherif, Sumiyama, K., and Suzuki, K., J. Mater. Res. 10, 659 (1995).CrossRefGoogle Scholar
5.El-Eskandarany, M. Sherif, Mechanical Alloying for Fabrication of Advanced Engineering Materials, 1st ed. (William Andrew Publishing, New York, 2001), pp. 142–173.Google Scholar
6.Inoue, A., Matsuki, K., and Masumoto, T., Mater. Trans., JIM 31, 148 (1990).CrossRefGoogle Scholar
7.El-Eskandarany, M. Sherif and Inoue, A., Metall. Mater. Trans. A. 33A, 135 (2002).CrossRefGoogle Scholar
8.El-Eskandarany, M. Sherif and Inoue, A., J. Non-Cryst. Solids (2002, in press).Google Scholar
9.El-Eskandarany, M. Sherif and Inoue, A., Metall. Mater. Trans. A. 33A, 2145 (2002).CrossRefGoogle Scholar
10.Inoue, A., in Bulk Amorphous Alloys: Practical Characteristics and Applications, edited by Magini, M. and Wöhlbier, F.H. (Trans Tech Publications, Vetikon-Zuerich, Switzerland, 1999), pp. 140–141.Google Scholar
11.Gottschall, J., Mater. Trans., JIM 42, 548 (2001).CrossRefGoogle Scholar
12.Inoue, A., in Amorphous and Nanocrystalline Materials; Preparation, Properties and Applications, 1st ed., edited by Inoue, A. and Hashimoto, K. (Springer Publishing, Berlin, Germany, 2001), pp. 47–48.Google Scholar
13.Fan, C. and Inoue, A., Mater. Trans., JIM 38, 1040 (1997).CrossRefGoogle Scholar
14.Schwarz, R.B. and Koch, C.C., Appl. Phys. Lett. 49, 146 (1986).CrossRefGoogle Scholar
15.Schwarz, R.B. and Petrich, R.R., J. Less-Common Met. 140, 171 (1988).CrossRefGoogle Scholar
16.El-Eskandarany, M. Sherif, Aoki, K., and Suzuki, K., Appl. Phys. Lett. 60, 1562 (1992).CrossRefGoogle Scholar
17.El-Eskandarany, M. Sherif, Aoki, K., and Suzuki, K., J. Appl. Phys. 71, 2924 (1992).CrossRefGoogle Scholar
18.El-Eskandarany, M. Sherif, Aoki, K., and Suzuki, K., J. Appl. Phys. 72, 2665 (1992).CrossRefGoogle Scholar
19.El-Eskandarany, M. Sherif, Metall. Mater. Trans. 27A, 3267 (1996).CrossRefGoogle Scholar
20.El-Eskandarany, M. Sherif, Aoki, K., Sumiyama, K., and Suzuki, K., Appl. Phys. Lett. 70, 1679 (1997).CrossRefGoogle Scholar
21.El-Eskandarany, M. Sherif, Sumiyama, K., and Suzuki, K., Acta Mater. 45, 1175 (1997).CrossRefGoogle Scholar
22.El-Eskandarany, M. Sherif, J. Alloys Compd. 284, 295 (1999).CrossRefGoogle Scholar
23.El-Eskandarany, M. Sherif, Aoki, K., Sumiyama, K., and Suzuki, K., Acta Mater. 50, 1113 (2002).CrossRefGoogle Scholar
24.Mizushima, T., Makino, A., and Inoue, A., J. Appl. Phys. 83, 6329 (1998).CrossRefGoogle Scholar
25.Inoue, A., Zhang, T., Itoi, T., and Takeuchi, A., Mater. Trans., JIM 38, 359 (1997).CrossRefGoogle Scholar
26.Shen, B., Kimura, H., Inoue, A., and Mizushima, T., Mater. Trans., JIM 42, 660 (2001).CrossRefGoogle Scholar
27.Koshiba, H. and Inoue, A., Mater. Trans., JIM 42, 2572 (2001).CrossRefGoogle Scholar
28.Binary Alloy Phase Diagrams, 2nd ed., edited by Massalski, T.B. (ASM International, Materials Park, OH, 1992), Vol. 2, p. 1251.Google Scholar
29.Inoue, A., Kobayashi, K., Suryanarayana, C., and Masumoto, T., Scr. Metall. 14, 119 (1980).CrossRefGoogle Scholar
30.JADE card No. 23-0938.Google Scholar
31.Binary Alloy Phase Diagrams, 2nd ed., edited by Massalaki, T.B. (ASM International, Materials Park, OH, 1992), Vol. 2, p. 1265.Google Scholar
32.Buschow, K.H.J., J. Less-Common Met. 85, 221 (1982).CrossRefGoogle Scholar
33.Schwarz, R.B. and Johnson, W.L., Phys. Rev. Lett. 51, 415 (1983).CrossRefGoogle Scholar
34.Clements, B.M., Johnson, W.L., and Schwarz, R.B., J. Non-Cryst. Solids 61/62, 817 (1984).CrossRefGoogle Scholar
35.Cotts, E.J., Meng, W.J., and Johnson, W.L., Phys. Rev. Lett. 57, 2295 (1986).CrossRefGoogle Scholar
36.El-Eskandarany, M. Sherif and Inoue, A., Mater. Trans., JIM 43, 770 (2002).CrossRefGoogle Scholar
37.Ermakov, A.E., Yurchikov, E.E., and Barinov, V.A., Phys. Met. Metall. 52, 50 (1981).Google Scholar
38.Weeber, A.W., Bakker, H., and Boer, F.R., Europhys. Lett. 2, 445 (1986).CrossRefGoogle Scholar
39.Boer, F.R. de, Boom, R., Mattens, W.C.M., Miedema, A., and Niessen, A.K., Cohesion in Metals-Transition Metal Alloys (North-Holland, Amsterdam, The Netherlands, 1988), 266.Google Scholar