Hostname: page-component-848d4c4894-x5gtn Total loading time: 0 Render date: 2024-04-30T16:54:42.902Z Has data issue: false hasContentIssue false
  • English
  • Français

Reaction between niobium and silicon carbide at 1373 K

Published online by Cambridge University Press:  31 January 2011

D. L. Yaney  and
A. Joshi
D. L. Yaney
Affiliation:
Lockheed Missiles and Space Company, Inc., Research and Development Division, O/93-10, B/204, 3251 Hanover Street, Palo Alto, California 94304
A. Joshi
Affiliation:
Lockheed Missiles and Space Company, Inc., Research and Development Division, O/93-10, B/204, 3251 Hanover Street, Palo Alto, California 94304
Get access

Abstract

The reaction zone formed between niobium and silicon carbide during heating for 4 h at 1373 K was examined by transmission electron microscopy (TEM) and Auger electron spectroscopy (AES). The typical reaction layer sequence is SiC/Nb5Si4C/Nb5Si3/Nb2C/NbO/Nb. However, in one area of the specimen, the first reaction layer was NbC rather than Nb5Si4C. The high oxygen and carbon concentrations near the outer surface were shown by AES depth profiling to result from carbon and oxygen contamination from the vacuum system during annealing. In order to determine if the observed reaction layer sequence is consistent with conditions of local thermodynamic equilibrium, the quaternary Nb–Si–C–O phase diagram was calculated from available thermodynamic data. A minimum (most negative) free energy of formation for the ternary compound Nb5Si4C of −582 kJ/mole was estimated assuming that the equilibrium between NbSi2 and SiC observed experimentally at 1573 K1 also exists at 1373 K. Except for the region immediately adjacent to the substrate, the observed reaction layer sequence was in agreement with the calculated quaternary phase diagram. However, it was noted that agreement with the quaternary phase diagram would be obtained if a thin layer of either SiO2 or NbC were present at the substrate surface.

Type
Articles
Information
Journal of Materials Research , Volume 5 , Issue 10 , October 1990 , pp. 2197 - 2208
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1Brukl, C. E., “Ternary Phase Equilibria in Transition Metal-Boron-Carbon-Silicon Systems,” AFML-TR-65–2 Part II, Vol. VII, 1966.CrossRefGoogle Scholar
2English, C., in Niobium, Proc. Int. Symp., edited by Stuart, H. (The Metallurgical Society of AIME, Warrendale, PA, 1984), p. 239.Google Scholar
3Villars, P. and Calvert, L. D., Pearson's Handbook of Crystallographic Data for Intermetallic Phases (American Society for Metals, Metals Park, OH, 1985).Google Scholar
4Binary Alloy Phase Diagrams, edited by Massalski, T. B., Murray, J. L., Bennett, L. H., and Baker, H. (American Society for Metals, Metals Park, OH, 1986), Vol. 2, p. 1689.Google Scholar
5Binary Alloy Phase Diagrams, edited by Massalski, T. B., Murray, J. L., Bennett, L. H., and Baker, H. (American Society for Metals, Metals Park, OH, 1986), Vol. 1, p. 578.Google Scholar
6Birla, N. C. and Hoch, M., Metall. Trans. A 6A, 1631 (1975).CrossRefGoogle Scholar
7Terao, N., Jpn. J. Appl. Phys. 3, 104 (1964).CrossRefGoogle Scholar
8Mansfield, J., Convergent Beam Electron Diffraction of Alloy Phases (Adam Hilger Limited, Bristol, England, 1984), p. 61.Google Scholar
9Wicks, C. E. and Block, F. E., Thermodynamic Properties of 65 Elements—Their Oxides, Halides, Carbides and Nitrides (U. S. Government Printing Office, Washington, DC, 1963).Google Scholar
10Barin, I. and Knacke, O., Thermochemical Properties of Inorganic Substances (Springer-Verlag, New York, 1973).Google Scholar
11Rahaman, M. N. and De, L. C.Jonghe, Am. Ceram. Soc. Bull. 66, 782 (1987).Google Scholar