Skip to main content
×
×
Home

A Nanoscale Characterization with Electron Microscopy of Multilayered CrAlYN Coatings: A Singular Functional Nanostructure

  • Teresa C. Rojas (a1), Santiago Domínguez-Meister (a1), Marta Brizuela (a2), Alberto García-Luis (a2), Asunción Fernández (a1) and Juan Carlos Sánchez-López (a1)...
Abstract

A combination of transmission electron microscopy techniques and spatially resolved microanalysis is used to investigate the nanostructure, constituting phases, and chemical elemental distribution in CrAlYN multilayered coatings. The location of the metallic elements and their chemical state are needed to understand their functional properties. Samples were prepared with variable Al (4–12 at%) and Y (2–5 at%) contents by direct current reactive magnetron sputtering on silicon substrates using metallic targets and Ar/N2 mixtures under different deposition parameters (power applied to the target and rotation speed of the sample holder). The changes produced in the nanostructure and chemical distribution were investigated. Nanoscale resolution electron microscopy analysis has shown that these coatings present a singular nanostructure formed by multilayers containing at a certain periodicity nanovoids filled with molecular nitrogen. Spatially resolved energy dispersive spectroscopy and electron energy loss elemental mappings and profiles showed that the chromium, aluminum, and yttrium atoms are distributed in a sequential way following the position of the targets inside the deposition chamber. Analysis of the different atomic distribution and phases formed at the nanoscale is discussed depending on the deposition parameters.

Copyright
Corresponding author
* Corresponding author. E-mail: tcrojas@icmse.csic.es
References
Hide All
Abad, M.D., Sanjinés, R., Endrino, J.L., Gago, R., Andersson, J. & Sánchez-López, J.C. (2011). Identification of ternary phases in TiBC/a-C nanocomposite thin films: Influence on the electrical and optical properties. Plasma Process Polym 8(7), 579588.
Banakh, O., Schmid, P.E., Sanjinés, R. & Lévy, F. (2003). High-temperature oxidation resistance of Cr1−xAlxN thin films deposited by reactive magnetron sputtering. Surf Coat Technol 163164, 5761.
Barshilia, H.C., Deepthi, B., Rajam, K.S., Bhatti, K.P. & Chaudhary, S. (2009). Growth and characterization of superlattices prepared by reactive direct current magnetron sputtering. J Vac Sci Technol A 27, 2933.
Barshilia, H.C., Deepthi, B., Selvakumar, M., Jain, A. & Rajam, K.S. (2007). Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering. Appl Surf Sci 253, 50765083.
Barshilia, H.C., Selvakumar, N., Deepthi, B. & Rajam, K.S. (2006). A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings. Surf Coat Technol 201, 21932201
Braun, R., Rovere, F., Mayrhofer, P.H. & Leyens, C. (2010). Environmental protection of γ-TiAl based alloy Ti-45Al-8Nb by CrAlYN thin films and thermal barrier coatings. Intermetallics 18, 479486.
Brizuela, M., García-Luis, A., Braceras, I., Oñate, J.I., Sánchez-López, J.C., Martínez-Martínez, D., López-Cartes, C. & Fernández, A. (2005). Magnetron sputtering of Cr(Al)N coatings: Mechanical and tribological study. Surf Coat Technol 200(1-4), 192197.
Brizuela, M., García-Luis, A., Corengia, P., González-Santamaría, D., Muñoz, R. & González, J.J. (2009). Microstructural, mechanical and tribological properties of CrAlYN coatings deposited by magnetron sputtering. Plasma Process Polym 6, 162167.
Cabrera, G., Caicedo, J.C., Amaya, C., Yate, L., Muñoz Saldaña, J.C. & Prieto, P. (2011). Enhancement of mechanical and tribological properties in AISI D3 steel substrates by using a non-isostructural CrN/AlN multilayer coating. Mater Chem Phys 125, 576586.
Craven, A.J. (1995). The electron energy-loss near-edge structure (ELNES) on the N K-edges from the transition metal mononitrides with the rock-salt structure and its comparison with that on the C K-edges from the corresponding transition metal monocarbides. J Microsc 180(3), 250262.
Endrino, J.L., Fox-Rabinovich, G.S., Reiter, A., Veldhuis, S.V., Escobar Galindo, R., Albella, J.M. & Marco, J.F. (2007). Oxidation tuning in AlCrN coatings. Surf Coat Technol 201(8), 45054511.
Escobar Galindo, R., Endrino, J.L., Martínez, R. & Albella, J.M. (2010). Improving the oxidation resistance of AlCrN coatings by tailoring chromium out-diffusion. Spectrochim Acta Part B 65, 950958.
Fukumoto, N., Ezura, H. & Suzuki, T. (2009). Synthesis and oxidation resistance of TiAlSiN and multilayare TiAlSiN/CrAlN coating. Surf Coat Technol 204, 902906.
Godinho, V., Rojas, T.C. & Fernández, A. (2012a). Magnetron sputtered a-SiOxNy thin films: A closed porous nanostructure with controlled optical and mechanical properties. Micropor Mesopor Mater 149, 142146.
Godinho, V., Rojas, T.C., Trasobares, S., Ferrer, F.J., Delplancke-Ogletree, M.P. & Fernández, A. (2012b). Microstructural and chemical characterization of nanostructured TiAlSiN. Microsc Microanal 18, 114.
Hasegawa, H., Kawate, M. & Suzuki, T. (2005). Effects of Al contents on microstructures of Cr1−x Al x N and Zr1−x Al x N films synthesized by cathodic arc method. Surf Coat Technol 200, 24092413.
Holec, D., Rachbauer, R., Kiener, D., Cherns, P.D., Costa, P.M.F.J., Mcaleese, C., Mayrhofer, P.H. & Humphreys, C.J. (2011). Towards predictive modelling of near-edge structures in electron energy loss spectra of AlN based ternary alloys. Phys Rev B 83(16), 165122165132.
Hovsepian, P.E.H., Lewis, D.B. & Münz, W.D. (2000). Recent progress in large scale manufacturing of multilayer/superlattice hard coatings. Surf Coat Technol 133134, 166175.
Hovsepian, P.E.H., Reinhard, C. & Ehiasarian, A.P. (2006). CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique. Surf Coat Technol 201, 41054110.
Kawate, M., Hashimoto, A.K. & Suzuki, T. (2003). Microstructure and mechanical properties of CrAlN coatings deposited by modified ion beam enhanced magnetron sputtering on AISI H13 steel. Surf Coat Technol 165, 163167.
Kucheyev, S.O., Williams, J.S., Zou, J., Jagadish, C. & Li, G. (2000). Ion-beam-induced dissociation and bubble formation in GaN. Appl Phys Lett 77(22), 35773579.
Lee, H.Y., Han Jeon, G., Baeg Seung, H. & Yang, S.E.H. (2002). Structure and properties of WC-CrAlN superlattice films by cathodic arc ion plating process. Thin Solid Films 420421, 414420.
Lin, J., Mishra, B., Moore, J.J. & Sproul, W.D. (2008). A study of the oxidation behavior of CrN and CrAlN thin films in air using DSC and TGA analyses. Surf Coat Technol 202, 32723283.
Mackenzie, M., Weatherly, G.C., Mccomb, D.C. & Craven, A.J. (2005). Electron energy loss spectroscopy of a TiAIN coating on stainless steel. Scripta Materialia 53, 983987.
Mayrhofer, P.H., Music, D., Reeswinkel, T.H., Fuss, H.G. & Schneider, J.M. (2008). Structure, elastic properties and phase stability of Cr1-xAlxN. Acta Mater 56, 24692475.
Mège-Revil, A., Steyer, P., Fontaine, J., Pierson, J.F. & Esnouf, C. (2009). Oxidation and tribo-oxidation of nanocomposite Cr-Si-N coatings deposited by a hybrid arc/magnetron process. Surf Coat Technol 204, 973977.
Musil, J., Vlcek, J. & Zeman, P. (2008). Hard amorphous nanocomposite coatings with oxidation resistance above 1000 degrees C. Adv Appl Ceramics 107, 148154.
Panjan, M., Cekada, M., Panjan, P., Zalar, A. & Peterman, T. (2008). Sputtering simulation of multilayer coatings in industrial PVD system with three-fold rotation. Vacuum 82, 158161.
Panjan, M., Peterman, T., Cekada, M. & Panjan, P. (2009). Simulation of a multilayer structure in coatings prepared by magnetron sputtering. Surf Coat Technol 204, 850853.
Perez-Omil, J.A. (1994). Interpretacion sistematica de imágenes de microscopía electronica de alta resolucion de materiales policristalino. Estudio de catalizadores metálicos soportados. Eje-Z software programme. Departamento de Ciencia de Materiales e Ingeniería Metalúrgica y Química Inorgánica. Cádiz, Spain: University of Cádiz.
Prescott, R. & Graham, M.J. (1992). The formation of aluminium-oxide scales on high-temperature alloys. Oxid Met 38, 233254.
Reiter, A.E., Derflinger, V.H., Hanselmann, B., Bachmann, T. & Sartory, B. (2005). Investigation of the properties of Al1−x Cr x N coatings prepared by cathodic arc evaporation. Surf Coat Technol 7, 21142122.
Rojas, T.C., El Mrabet, S., Domínguez-Meister, S., Brizuela, M., García-Luis, A. & Sánchez-López, J.C. (2012). Chemical and microstructural characterization of (Y or Zr)-doped CrAlN coatings. Surf Coat Technol 211, 104110.
Romero-Gomez, P., Palmerom, A., Ben, T., Lozano, J.G., Molina, S.I. & González-Elipe, A.R. (2010). Surface nanostructuring of TiO2 thin films by high energy ion irradiation. Phys Rev B 82, 115420.
Ross, I.M., Rainforth, W.M., Seabourne, C.R., Scott, A.J., Wang, P., Mendis, B.G., Bleloch, A.L., Reinhard, C. & Hovsepian, P.E.H. (2010). Electron energy loss spectroscopy of nano-scale CrAlYN/CrN-CrAlY(O)N/Cr(O)N multilayer coatings deposited by unbalanced magnetron sputtering. Thin Solid Films 518, 51215127.
Rovere, F., Mayrhofer, P.H., Reinholdt, A., Mayer, J. & Scheneider, J.M. (2008). The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings. Surf Coat Technol 202, 58705875.
Ruck, B.J., Koo, A., Lanke, U.D., Budde, F., Granville, S., Trodahl, H.J., Bittar, A., Metson, J.B., Kennedy, V.J. & Markwitz, A. (2004). Quantitative study of molecular N2 trapped in disordered GaN:O films. Phys Rev B 70, 235202.
Sánchez, J.E., Sánchez, O.M., Ipaz, L., Aperador, W., Caicedo, J.C., Amaya, C., Hernández Landaverde, M.A., Espinoza Beltrán, F., Muñoz-Saldaña, J. & Zambrano, G. (2010). Mechanical, tribological, and electrochemical behavior of Cr1−x Al x N coatings deposited by r.f. reactive magnetron co-sputtering method. Appl Surf Sci 256, 23802387.
Sánchez-López, J.C., Martínez-Martínez, D., López-Cartes, C., Fernández, A., Brizuela, M., García-Luis, A. & Oñate, J.I. (2005a). Mechanical behaviour and oxidation resistance of Cr(Al)N coatings. J Vac Sci Technol A 23(4), 681686.
Sánchez-López, J.C., Martínez-Martínez, D., López-Cartes, C., Fernández-Ramos, C. & Fernández, A. (2005b). A nanoscale approach for the characterization of amorphous carbon-based lubricant coatings. Surf Coat Technol 200, 4045.
Steyer, P.H., Mege, A., Pech, D., Mendibide, C., Fontaine, J., Pierson, J.F., Esnouf, C. & Goudeau, P. (2008). Influence of the nanostructuration of PVD hard TiN-based films on the durability of coated steel. Surf Coat Technol 202, 22682277.
Tien, S.-K., Lin, C.-H., Tsai, Y.-Z. & Duh, J.-G. (2010). Oxidation behavior, microstructure evolution and thermal stability in nanostructured CrN/AlN multilayer hard coatings. J Alloy Comp 489(1), 237241.
Veprek, S. & Veprek-Heijman Maritza, J.G. (2008). Industrial applications of superhard nanocomposite coatings. Surf Coat Technol 202(21), 50635073.
Wang, L., Nie, X., Housden, J., Spain, E., Jiang, J.C., Meletis, E.I., Leyland, A. & Matthews, A. (2008). Material transfer phenomena and failure mechanisms of a nanostructured Cr-Al-N coating in laboratory wear test and an industrial punch tool application. Surf Coat Technol 203, 816821.
Willmann, H., Mayrhofer, P.H., Persson, P.O.A., Reiter, A.E., Hultman, L. & Mitterer, C. (2006). Thermal stability of Al–Cr–N hard coatings. Scripta Mater 54, 18471851.
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Microscopy and Microanalysis
  • ISSN: 1431-9276
  • EISSN: 1435-8115
  • URL: /core/journals/microscopy-and-microanalysis
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords

Metrics

Altmetric attention score

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed