Skip to main content
×
Home
    • Aa
    • Aa
  • Get access
    Check if you have access via personal or institutional login
  • Cited by 41
  • Cited by
    This article has been cited by the following publications. This list is generated based on data provided by CrossRef.

    Karaoglanli, Abdullah Cahit Doleker, Kadir Mert and Ozgurluk, Yasin 2017. Properties and Characterization of Modern Materials.


    Bernard, Benjamin Bianchi, Luc Malié, André Joulia, Aurélien and Rémy, Benjamin 2016. Columnar suspension plasma sprayed coating microstructural control for thermal barrier coating application. Journal of the European Ceramic Society, Vol. 36, Issue. 4, p. 1081.


    Carpio, Pablo Rayón, Emilio Salvador, María Dolores Lusvarghi, Luca and Sánchez, Enrique 2016. Mechanical Properties of Double-Layer and Graded Composite Coatings of YSZ Obtained by Atmospheric Plasma Spraying. Journal of Thermal Spray Technology, Vol. 25, Issue. 4, p. 778.


    Chen, Xiaolong Ohnuki, Takuma Kuroda, Seiji Gizynski, Maciej Araki, Hiroshi Murakami, Hideyuki Watanabe, Makoto and Sakka, Yoshio 2016. Columnar and DVC-structured thermal barrier coatings deposited by suspension plasma spray: high-temperature stability and their corrosion resistance to the molten salt. Ceramics International,


    Chen, Xiaolong Kuroda, Seiji Ohnuki, Takuma Araki, Hiroshi Watanabe, Makoto Sakka, Yoshio and Trice, R. 2016. Effects of Processing Parameters on the Deposition of Yttria Partially Stabilized Zirconia Coating During Suspension Plasma Spray. Journal of the American Ceramic Society,


    Munawar, Ahmed Umar Schulz, Uwe and Shahid, Muhammad 2016. Microstructure and lifetime of EB-PVD TBCs with Hf-doped bond coat and Gd-zirconate ceramic top coat on CMSX-4 substrates. Surface and Coatings Technology, Vol. 299, p. 104.


    Padture, Nitin P. 2016. Advanced structural ceramics in aerospace propulsion. Nature Materials, Vol. 15, Issue. 8, p. 804.


    Park, Chanyoung Choi, Seona Chae, Jungmin Kim, Seongwon Kim, Hyungtae and Oh, Yoon-Suk 2016. Effect of Substrate Rotation on the Phase Evolution and Microstructure of 8YSZ Coatings Fabricated by EB-PVD. Journal of the Korean Ceramic Society, Vol. 53, Issue. 1, p. 81.


    Schmitt, Michael P. Harder, Bryan J. and Wolfe, Douglas E. 2016. Process-structure-property relations for the erosion durability of plasma spray-physical vapor deposition (PS-PVD) thermal barrier coatings. Surface and Coatings Technology, Vol. 297, p. 11.


    Sharma, Prashant and Dutta Majumdar, Jyotsna 2016. Studies on nano-crystalline CoNiCrAlY consolidated by conventional and microwave sintering. Advanced Powder Technology, Vol. 27, Issue. 1, p. 72.


    Song, Wenjia Lavallée, Yan Hess, Kai-Uwe Kueppers, Ulrich Cimarelli, Corrado and Dingwell, Donald B. 2016. Volcanic ash melting under conditions relevant to ash turbine interactions. Nature Communications, Vol. 7, p. 10795.


    Stathopoulos, Vassilis Sadykov, Vladislav Pavlova, Svetlana Bespalko, Yulia Fedorova, Yulia Bobrova, Lyudmila Salanov, Aleksei Ishchenko, Arcady Stoyanovsky, Vladimir Larina, Tatiana Ulianitsky, Vladimir Vinokurov, Zakhar and Kriventsov, Vladimir 2016. Design of functionally graded multilayer thermal barrier coatings for gas turbine application. Surface and Coatings Technology, Vol. 295, p. 20.


    Zhao, Meng Pan, Wei Wan, Chunlei Qu, Zhixue Li, Zheng and Yang, Jun 2016. Defect engineering in development of low thermal conductivity materials: A review. Journal of the European Ceramic Society,


    Ananthapadmanabhan, P. V. Chakravarthy, Y. Chaturvedi, Vandana Thiyagarajan, T. K. and Pragatheeswaran, A. 2015. Plasma-Sprayed Ceramic Coatings for Barrier Applications Against Molten Uranium Corrosion. JOM, Vol. 67, Issue. 7, p. 1554.


    Dwivedi, Gopal Flynn, Katherine Resnick, Michael Sampath, Sanjay and Gouldstone, Andrew 2015. Bioinspired Hybrid Materials from Spray-Formed Ceramic Templates. Advanced Materials, Vol. 27, Issue. 19, p. 3073.


    Fang, Xufei Zhang, Guobing and Feng, Xue 2015. Performance of TBCs system due to the different thicknesses of top ceramic layer. Ceramics International, Vol. 41, Issue. 2, p. 2840.


    Li, Xiaolong Yang, Qi Huang, Xiao and Tang, Zhaolin 2015. Isothermal Oxidation Behavior of VC and Columnar Structured Thermal Barrier Coatings Deposited by Suspension Plasma Spray Technology. Journal of Thermal Spray Technology, Vol. 24, Issue. 6, p. 1060.


    Mao, W.G. Luo, J.M. Dai, C.Y. and Shen, Y.G. 2015. Effect of heat treatment on deformation and mechanical properties of 8mol% yttria-stabilized zirconia by Berkovich nanoindentation. Applied Surface Science, Vol. 338, p. 92.


    Ren, Xiaorui Zhao, Meng Wan, Chunlei Zheng, Yixin Pan, Wei and Trice, R. 2015. High-Temperature Aging of Plasma Sprayed Quasi-Eutectoid LaYbZr2O7-Part II: Microstructure & Thermal Conductivity. Journal of the American Ceramic Society, Vol. 98, Issue. 9, p. 2836.


    Ren, Xiaorui Zhao, Meng Wan, Chunlei Zheng, Yixin Pan, Wei and Trice, R. 2015. High-Temperature Aging of Plasma Sprayed Quasi-Eutectoid LaYbZr2O7-Part I: Phase Evolution. Journal of the American Ceramic Society, Vol. 98, Issue. 9, p. 2829.


    ×

Processing science of advanced thermal-barrier systems

  • Sanjay Sampath (a1), Uwe Schulz (a2), Maria Ophelia Jarligo (a3) and Seiji Kuroda (a4)
  • DOI: http://dx.doi.org/10.1557/mrs.2012.233
  • Published online: 01 October 2012
Abstract
Abstract

Thermal-barrier coatings (TBCs) are complex, defected, thick films made of zirconia-based refractory ceramic oxides. Their widespread applicability has necessitated development of high throughput, low cost materials manufacturing technologies. Thermal plasmas and electron beams have been the primary energy sources for processing of such systems. Electron-beam physical vapor deposition (EBPVD) is a sophisticated TBC fabrication technology for rotating parts of aero engine components, while atmospheric plasma sprays (APS) span the range from rotating blades of large power generation turbines to afterburners in supersonic propulsion engines. This article presents a scientific description of both contemporary manufacturing processes (EBPVD, APS) and emerging TBC deposition technologies based on novel extensions to plasma technology (suspension spray, plasma spray-PVD) to facilitate novel compliant and low thermal conductivity coating architectures. TBCs are of vital importance to both performance and energy efficiency of modern turbines with concomitant needs in process control for both advanced design and reliable manufacturing.

Copyright
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

A. Kulkarni , Z. Wang , T. Nakamura , S. Sampath , A. Goland , H. Herman , J. Allen , J. Ilavsky , G. Long , J. Frahm , R.W. Steinbrech , Acta Mater. 51, 2457 (2003).

A. Flores Renteria , B. Saruhan , U. Schulz , H.-J. Raetzer-Scheibe , J. Haug , A. Wiedenmann , Surf. Coat. Technol. 201, 2611 (2006).

A.G. Evans , D.R. Mumm , J.W. Hutchinson , G.H. Meier , F.S. Pettit , Prog. Mater. Sci. 46 (5) 505 (2001).

Y. Liu , T. Nakamura , G. Dwivedi , A. Valarezo , S. Sampath , J. Am. Ceram. Soc. 91 (12), 4036 (2008).

Y. Liu , T. Nakamura , V. Srinivasan , A. Vaidya , A. Gouldstone , S. Sampath , Acta Mater. 55, 4667 (2007).

P. Fauchais , G. Montavon , J. Therm. Spray Technol. 19 (1–2), 226 (2010).

K. Von Niessen , M. Gindrat , J. Therm. Spray Technol. 20 (4), 736 (2011).

U. Schulz , B. Saruhan , K. Fritscher , C. Leyens , Int. J. Appl. Ceram. Technol. 1, 302 (2004).

A. Flores Renteria , B. Saruhan , J. Ilavsky , A.J. Allen , Surf. Coat. Tech. 201 (8) 4781 (2007).

U. Schulz , S.G. Terry , C.G. Levi , Mater. Sci. Eng. A 360, 319 (2003).

A. Vaidya , V. Srinivasan , T. Streibl , M. Friis , W. Chi , S. Sampath , Mater. Sci. Eng., A 497, 239 (2008).

S. Kuroda , T.W. Clyne , Thin Solid Films 200 (1), 49 (1991).

T. Nakamura , Y. Liu , Int. J. Solids Struct. 44 (6), 1990 (2007).

W. Chi , S. Sampath , H. Wang , J. Am. Ceram. Soc. 91 (8), 2636 (2008).

G. Dwivedi , T. Nakamura , S. Sampath , J. Am. Ceram. Soc. 94, 104 (2011).

H.B. Guo , H. Murakami , S. Kuroda , Mater. Trans. 47 (42), 308 (2006).

H.B. Guo , R. Vaßen , D. Stöver , Surf. Coat. Technol. 186 (3), 353 (2004).

K. Ito , H. Kuriki , M. Watanabe , S. Kuroda , M. Enoki , Mater. Trans. 53, 671 (2012).

A. Kulkarni , A. Goland , H. Herman , A. Allen , J. Ilavsky , G. Long , C. Johnson , J. Ruud , J. Am. Ceram. Soc. 87 (7), 1294 (2004).

J. Karthikeyan , C.C. Berndt , J. Tikkanen , S. Reddy , H. Herman , Mater. Sci. Eng., A 238 (2), 275 (1997).

R. Rampon , C. Filiatre , G. Bertrand , J. Therm. Spray Technol. 17 (1), 105 (2008).

C. Delbos , J. Fazilleau , V. Rat , J.F. Coudert , P. Fauchais , B. Pateyron , Plasma Chem. Plasma Process. 26 (4), 393 (2006).

H. Kassner , R. Siegert , D. Hathiramani , R. Vassen , D. Stoever , J. Therm. Spray Technol. 17 (1), 115 (2008).

A. Guignard , G. Mauer , R. Vaßen , D. Stöver , J. Therm. Spray Technol. 21, 416 (2012).

A. Hospach , G. Mauer , R. Vassen , D. Stover , J. Therm. Spray Technol. 20 (1–2), 116 (2011).

D. Zhu , R. Miller , Int. J. Appl. Ceram. Technol. 1, 86 (2004).

R. Vassen , X. Cao , F. Tietz , D. Basu , D. Stöver , J. Am. Ceram. Soc. 83 (8), 2023 (2000).

M. Jarligo , D.E. Mack , R. Vassen , D. Stöver , J. Therm. Spray Technol. 18 (2), 187 (2009).

Y. Tan , J. Longtin , S. Sampath , H. Wang , J. Am. Ceram. Soc. 92 (3), 710 (2009).

C. Mercer , J.R. Williams , D.R. Clarke , A.G. Evans , Proc. R. Soc. 463 (2081), 1393 (2007).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

MRS Bulletin
  • ISSN: 0883-7694
  • EISSN: 1938-1425
  • URL: /core/journals/mrs-bulletin
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords: