Skip to main content Accessibility help
×
Home

Capillary And Magnetic Forces For Microscale Self-Assembled Systems

  • Christopher J. Morris (a1), Kate E. Laflin (a2), Brian Isaacson (a3), Michael Grapes (a4) and David Gracias (a5)...

Abstract

Self-assembly is a promising technique to overcome fundamental limitations with integrating, packaging, and generally handling individual electronic-related components with characteristic lengths significantly smaller than 1 mm. Here we briefly summarize the use of capillary and magnetic forces to realize two example microscale systems. In the first example, we use capillary forces from a low melting point solder alloy to integrate 500 μm square, 100 μm thick silicon chips with thermally and chemically sensitive metal-polymer hinge actuators, for potential medical applications. The second example demonstrates a path towards self-assembling 3-D silicon circuits formed out of 280 μm sized building blocks, utilizing both capillary forces from a low melting point solder alloy and magnetic forces from integrated, permanent magnets. In the latter example, the utilization of magnetic forces combined with capillary forces improved the assembly yield to 7.8% over 0.1% achieved previously with capillary forces alone.

Copyright

References

Hide All
1 Morris, C. J., Stauth, S. A., and Parviz, B. A., “Self-assembly for micro and nano scale packaging: steps toward self-packagingIEEE Trans. Adv. Packag. 28, 600611, (2005).
2 Arscott, S., Peytavit, E., Vu, D., Rowe, A. C. H., and Paget, D., “Fluidic assembly of hybrid MEMS: a GaAs-based microcantilever spin injectorJ. Micromech. Microeng. 20, 025023, (2010).
3 Knuesel, R. J. and Jacobs, H. O., “Self-assembly of microscopic chiplets at a liquid-liquidsolid interface forming a flexible segmented monocrystalline solar cellProc. Natl. Acad. Sci. 107, 993998, (2010).
4 Knuesel, R. J. and Jacobs, H., “Fluidic surface-tension-directed self-assembly of miniaturized semiconductor dies across length scales and 3D topologies” in MRS Spring Meeting, Symposium BB, San Francisco, CA: Materials Research Society, April 13–17 2009.
5 Xiong, X., Hanein, Y., Fang, J., Wang, Y., Wang, W., Schwartz, D. T., and Bohringer, K. F., “Controlled multibatch self-assembly of microdevicesJ. Microelectromech. Sys. 12, 117127, (2003).
6 Stauth, S. A. and Parviz, B. A., “Self-assembled single-crystal silicon circuits on plasticProc. Natl. Acad. Sci. U. S. A. 103, 1392213927, (2006).
7 Srinivasan, U., Liepmann, D., and Howe, R. T., “Microstructure to substrate self-assembly using capillary forcesJ. Microelectromech. Sys. 10, 1724, (2001).
8 Srinivasan, U., Helmbrecht, M., Rembe, C., Muller, R., and Howe, R., “Fluidic self-assembly of micromirrors onto microactuators using capillary forcesIEEE J. Sel. Top. Quantum Electron. 8, 411, (2002).
9 Jacobs, H. O., Tao, A. R., Schwartz, A., Gracias, D. H., and Whitesides, G. M., “Fabrication of a cylindrical display by patterned assembly.” Science 296, 323–5, (2002).
10 Cho, J.-H. and Gracias, D. H., “Self-assembly of lithographically patterned nanoparticles” Nano Lett.” (2009).
11 Leong, T. G., Lester, P. A., Koh, T. L., Call, E. K., and Gracias, D. H., “Surface tension-driven self-folding polyhedra” Langmuir 23, 8747–8751, (2007).
12 Zheng, W., Buhlmann, P., and Jacobs, H. O., “Sequential shape-and-solder-directed selfassembly of functional microsystemsProc. Natl. Acad. Sci. U. S. A. 101, 1281412817, (2004).
13 Zheng, W. and Jacobs, H. O., “Shape-and-solder-directed self-assembly to package semiconductor device segmentsAppl. Phys. Lett. 85, 36353637, (2004).
14 Clark, T. D., Tien, J., Duffy, D. C., Paul, K. E., and Whitesides, G. M., “Self-assembly of 10-μm-sized objects into ordered three-dimensional arraysJ. Am. Chem. Soc. 123, 76777682, (2001).
15 Clark, T. D., Ferrigno, R., Tien, J., Paul, K. E., and Whitesides, G. M., “Template-directed selfassembly of 10-ìm-sized hexagonal plates,” J. Am. Chem. Soc. 124, 54195426, (2002).
16 Fonstad, C. G. Jr., and Zahn, M., “Method and system for magnetically assisted statistical assembly of wafers,” United States Patent: 6,888,178, May 2005.
17 Rivero, R., Shet, S., Booty, M., Fiory, A., and Ravindra, N., “Modeling of magnetic-fieldassisted assembly of semiconductor devices,” J. Electron. Mater. 37, 374378, (2008).
18 Ramadan, Q., Uk, Y. S., and Vaidyanathan, K., “Large scale microcomponents assembly using an external magnetic array,” Appl. Phys. Lett. 90, 172502–3, (2007).
19 Ye, H., Gu, Z., Yu, T., and Gracias, D. H., “Integrating nanowires with substrates using directed assembly and nanoscale soldering,” IEEE Trans. Nanotechnol. 5, 62–6, (2006).
20 Love, J. C., Urbach, A. R., Prentiss, M. G., and Whitesides, G. M., “Three-dimensional selfassembly of metallic rods with submicron diameters using magnetic interactions.” J. Am. Chem. Soc. 125, 12696–7, (2003).
21 Leong, T. G., Randall, C. L., Benson, B. R., Zarafshar, A. M., and Gracias, D. H., “Self-loading lithographically structured microcontainers: 3D patterned, mobile microwells,” Lab Chip 8, 16211624, (2008).
22 Bassik, N., Stern, G. M., and Gracias, D. H., “Microassembly based on hands free origami with bidirectional curvature,” Appl. Phys. Lett. 95, 091901–3, (2009).
23 Leong, T. G., Randall, C. L., Benson, B. R., Bassik, N., Stern, G. M., and Gracias, D. H., “Tetherless thermobiochemically actuated microgrippers,” Proc. Natl. Acad. Sci. 106, 703708, (2009).
24 Randhawa, J. S., Leong, T. G., Bassik, N., Benson, B. R., Jochmans, M. T., and Gracias, D. H., “Pick-and-place using chemically actuated microgrippers,” J. Am. Chem. Soc. 130, 1723817239, (2008).
25 Guan, S. and Nelson, B. J., “Electrodeposition of low residual stress conimnp hard magneticthin films for magnetic mems actuators,” J. Magn. Magn. Mater. 292, 49–58, (2005).
26 Cho, H. J. and Ahn, C. H., “A bidirectional magnetic microactuator using electroplated permanent magnet arrays,” J. Microelectromech. Sys. 11, 7884, (2002).
27 Liakopoulos, T. M., Zhang, W., and Ahn, C. H., “Micromachined thick permanent magnet arrays on silicon wafers,” IEEE Trans. Magn. 32, 51545156, (1996).
28 Horkans, J., Seagle, D. J., and Chang, I. C. H., “Electroplated magnetic media with vertical anisotropy,” J. Electrochem. Soc. 137, 20562061, (1990).
29 Grapes, M. and Morris, C. J., “Optimizing the CoNiMnP electrodeposition process using taguchi design of experiments,” J. Electrochem. Soc.,” (2010), submitted.
30 Morris, C. J. and Dubey, M., “Toward three dimensional circuits formed by molten-alloy driven self-assembly,” in Proc. 26th Annual Army Science Conference, Orlando, FL, Dec. 1–4 2008.

Keywords

Capillary And Magnetic Forces For Microscale Self-Assembled Systems

  • Christopher J. Morris (a1), Kate E. Laflin (a2), Brian Isaacson (a3), Michael Grapes (a4) and David Gracias (a5)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed