No CrossRef data available.
Article contents
Hydrophobic Dielectrics of Fluoropolymer / BaTiO3 Nanocomposites for Low-Voltage and Charge Storing Electrowetting Devices
Published online by Cambridge University Press: 01 February 2011
Abstract
A hydrophobic fluoropolymer:BaTiO3 nanocomposite is presented for achieving lower-voltage electrowetting operation. The composite fluoropolymer film exhibits as much as a 10X increase in measured dielectric constant. Increased surface roughness with BaTiO3 content increased the sessile drop contact angle from θ∼104° to 121° with compositions ranging from 0 to 97 vol. % of BaTiO3 in the fluoropolymer. A larger change in electrowetted contact angle is observed for the 50 vol. % of BaTiO3 nanocomposite (delta theta∼60°) compared to a standard fluoropolymer film of 1 um thickness (delta theta∼30°). Furthermore, required operating voltage for electrowetting decreases by ∼30V for films with high BaTiO3 content. Strong charge storage in the nanocomposite was observed via a new bistable electrowetting effect. For samples with strong charge storage, the droplet remains wetted (>2 minutes) even after removing the applied voltage. Rapid (< 1s) droplet de-wetting could be achieved by briefly applying a reverse polarity voltage to remove the stored charge in the nanocomposite.
Keywords
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2007