Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-19T02:55:22.558Z Has data issue: false hasContentIssue false

Improved optical loss characteristics of PECVD silicon oxynitride films using low frequency plasma

Published online by Cambridge University Press:  01 February 2011

S. Naskara
Affiliation:
CMET, RTI-International, Research Triangle Park, NC 27709 Department of Electrical Engineering, Duke University, Durham NC 27709
C.A. Bower
Affiliation:
CMET, RTI-International, Research Triangle Park, NC 27709
S.D. Wolter
Affiliation:
Department of Electrical Engineering, Duke University, Durham NC 27709
B.R. Stonera
Affiliation:
CMET, RTI-International, Research Triangle Park, NC 27709 Department of Electrical Engineering, Duke University, Durham NC 27709
J.T. Glass
Affiliation:
Department of Electrical Engineering, Duke University, Durham NC 27709
Get access

Abstract

With the continued growth of photonics, silicon oxynitride (SiOxNy) is becoming a popular material for optoelectronic applications owing to its large tunable refractive index. However, with the increase in refractive index, these films tend to show poor optical transmission characteristics. In this research we have investigated the influence of growth conditions on the loss characteristics of PECVD SiOxNy films. The films are grown at 350 °C substrate temperature and 1 Torr pressure with silane (SiH4) and nitrous oxide (N2O) precursor gases. The precursor flow rate and power input to the system are varied as the two primary parameters. It is observed that films grown at 100 kHz plasma frequency proved to be more transmissive than films grown at 13.56 MHz plasma frequency. Elastic recoil detection analysis results showed the hydrogen content is less in the low frequency films than the high frequency films, which is believed to be the reason for the low loss behavior. The details of these analysis results are discussed below.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Alayo, M.I., Pereyra, I., Carreno, M.N.P., Thin Solid Films 332, 40 (1998)10.1016/S0040-6090(98)01021-9Google Scholar
2 Alayo, M.I., Pereyra, I., Scopel, W.L., Fantini, M.C.A., Thin Solid Films 402, 154 (2002)10.1016/S0040-6090(01)01685-6Google Scholar
3 Ay, F., Aydinli, A., Roeloffzen, C., Driessen, A., IEEE (LEOS) 2000 2, 760 (2000)Google Scholar
4 Worhoff, K., Hilderink, L.T.H., Driessen, A., Lambeck, P.V., J. Electrochem. Soc. 149(8), F85 (2002)10.1149/1.1486240Google Scholar
5 Worhoff, K., Lambeck, P.V., Driessen, A., J. Lightwave Tech. 17(8), 1401 (1999)10.1109/50.779161Google Scholar
6 Naskar, S., Bower, C.A., Yadon, L.N., Wolter, S.D., Stoner, B.R., Glass, J.T., MRS Symposia proceedings, FF 3.22 Boston MA, (2005)Google Scholar